Ionic liquids (ILs) have many attractive properties. For example, their physical and chemical properties can be tuned by a judicious design of the cations and anions, making them ideal candidates for designable building blocks of stimuli-responsive materials. Numerous IL-based stimuli-responsive materials have been developed by chemical modification (covalent, coordination, or ionic functionalization) or physical blending of ILs with other functional materials. The flexible tunability of ILs provides a great opportunity to achieve the desired physicochemical properties for taskspecific applications, such as sensing, display, gas capture, and so on. This review aims to address the recent advances in IL-based stimuli-responsive materials, which are categorized by the type of external stimuli, including gas-responsive, organic solvent-responsive, ion-responsive, pH-responsive, thermo-responsive, photo-responsive, and electro-responsive materials.
Ultrasound at 20 kHz was applied to a cross-flow ultrafiltration system with gamma-alumina membranes in the presence of colloidal silica particles to systematically investigate how ultrasonic factors affect membrane cleaning. Based on imaging of the ultrasonic cavitation region, optimal cleaning occurred when the membrane was outside but close to the cavitation region. Increasing the filtration pressure increased the compressive forces driving cavitation collapse and resulted in fewer cavitation bubbles absorbing and scattering sound waves and increasing sound wave penetration. However, an increased filtration pressure also resulted in greater permeation drag, and subsequently less improvement in permeate flux compared to low filtration pressure. Finally, pulsed ultrasound with short pulse intervals resulted in permeate flux improvement close to that of continuous sonication.
A series of six pharmaceuticals were degraded by continuous wave (CW) and pulsed wave (PW) ultrasound at 205 kHz using deionized water, wastewater effluent, and its isolated organic matter matrices. In deionized water, we observed that hydrophobicity is superior to diffusivity (D(W)) for predicting degradation kinetics. Enhancements in degradation kinetics by the PW mode were greatest for the highest DW (i.e., fluorouracil (5-FU)) and K(OW) (i.e., lovastatin (LOVS)) compounds, indicating that a pharmaceutical with either high diffusivity and low hydrophobicity or low diffusivity and high hydrophobicity benefits from additional time to populate the bubble-water interface during the silent cycle of PW ultrasound. Degradation of 5-FU and LOVS were inhibited by wastewater effluent to a greater extent than the other pharmaceuticals. In addition, a pulse enhancement (PE) for 5-FU and LOVS was not present in wastewater effluent. Irradiating 5-FU and LOVS in hydrophobic (HPO), transphilic (TPI), and hydrophilic (HPI) fractions of effluent organic matter (EfOM) showed that the TPI fraction reduced the PE the most, followed by the HPI and HPO fractions. The smaller size of the TPI over the HPO fraction and higher hydrophobicity of TPI over HPI implicate both size and hydrophobicity of EfOM in hindering degradation of pharmaceuticals.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.