/ Matching biological and chemical data were COmpiled from numerous modeling, laboratory, and field ....._.,. studies performed in marine and estuarine sediments. Using these data, two guideline values (an effects range-low and an effects range-median) were determined for nine trace metals, total PCBs, two pesticides, 13 polynuclear aromatic hydrocarbons (PAHs), and three classes of PAHs. The two values defined concentration ranges that were: (1) rarely, (2) occasionally, or (3) frequently associated with adverse effects. The values generally agreed within a factor of 3 or less with those developed with the same methods applied to other data and to those developed with other effects-based methods. The incidence of adverse effects was quantified within each of the three concentration ranges as the number of cases in which effects were observed divided by the total number of observations. The incidence of effects increased markedly with increasing concentrations of all of the individual PAHs, the three classes of PAHs, and most of the trace metals. Relatively poor relationships were observed between the incidence of effects and the concentrations of mercury, nickel, total PCB, total DDT and p,p'-DDE. Based upon this evaluation, the approach provided reliable guidelines for use in sediment quality assessments. This method is being used as a basis for developing National sediment quality guidelines for Canada and informal, sediment quality guidelines for Florida.

Numerical sediment quality guidelines (SQGs) for freshwater ecosystems have previously been developed using a variety of approaches. Each approach has certain advantages and limitations which influence their application in the sediment quality assessment process. In an effort to focus on the agreement among these various published SQGs, consensus-based SQGs were developed for 28 chemicals of concern in freshwater sediments (i.e., metals, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and pesticides). For each contaminant of concern, two SQGs were developed from the published SQGs, including a threshold effect concentration (TEC) and a probable effect concentration (PEC). The resultant SQGs for each chemical were evaluated for reliability using matching sediment chemistry and toxicity data from field studies conducted throughout the United States. The results of this evaluation indicated that most of the TECs (i.e., 21 of 28) provide an accurate basis for predicting the absence of sediment toxicity. Similarly, most of the PECs (i.e., 16 of 28) provide an accurate basis for predicting sediment toxicity. Mean PEC quotients were calculated to evaluate the combined effects of multiple contaminants in sediment. Results of the evaluation indicate that the incidence of toxicity is highly correlated to the mean PEC quotient (R(2) = 0.98 for 347 samples). It was concluded that the consensus-based SQGs provide a reliable basis for assessing sediment quality conditions in freshwater ecosystems.

: The weight-of-evidence approach to the development of sediment quality guidelines (SQGs) was modified to support the derivation of biological effects-based SQGs for Florida coastal waters. Numerical SQGs were derived for 34 substances, including nine trace metals, 13 individual polycyclic aromatic hydrocarbons (PAHs), three groups of PAHs, total polychlorinated biphenyls (PCBs), seven pesticides and one phthalate ester. For each substance, a threshold effects level (TEL) and a probable effects level (PEL) was calculated. These two values defined three ranges of chemical concentrations, including those that were (1) rarely, (2) occasionally or (3) frequently associated with adverse effects. The SQGs were then evaluated to determine their degree of agreement with other guidelines (an indicator of comparability) and the percent incidence of adverse effects within each concentration range (an indicator of reliability). The guidelines also were used to classify (using a dichotomous system: toxic, with one or more exceedances of the PELs or non-toxic, with no exceedances of the TELs) sediment samples collected from various locations in Florida and the Gulf of Mexico. The accuracy of these predictions was then evaluated using the results of the biological tests that were performed on the same sediment samples. The resultant SQGs were demonstrated to provide practical, reliable and predictive tools for assessing sediment quality in Florida and elsewhere in the southeastern portion of the United States.

Resource managers need to predict effects of pollution episodes on aquatic biota, and suspended sediment is an important variable in considerations of freshwater quality. Despite considerable research, there is little agreement on environmental effects of suspended sediment as a function of concentration and duration of exposure. More than 70 papers on the effects of inorganic suspended sediments on freshwater and marine fish and other organisms were reviewed to compile a data base on such effects. Regression analysis indicates that concentration alone is a relatively poor indicator of suspended sediment effects (r2 = 0.14, NS). The product of sediment concentration (mg/L) and duration of exposure (h) is a better indicator of effects (r2 = 0.64, P < 0.01). An index of pollution intensity (stress index) is calculated by taking the natural logarithm of the product of concentration and duration. The stress index provides a convenient tool for predicting effects for a pollution episode of known intensity. Aquatic biota respond to both the concentration of suspended sediments and duration of exposure, much as they do for other environmental contaminants. Researchers should, therefore, not only report concentration of suspended sediment but also duration of exposure of aquatic biota to suspended sediments.

Matching synoptically collected chemical and laboratory bioassay data (n = 1,068) were compiled from analyses of surficial sediment samples collected during 1990 to 1993 to evaluate the predictive ability of sediment quality guidelines (SQGs), specifically, effects range—low (ERL), effects range—median (ERM), threshold effects level (TEL), and probable effects level (PEL) values. Data were acquired from surveys of sediment quality performed in estuaries along the Atlantic, Pacific, and Gulf of Mexico coasts. Samples were classified as either nontoxic (p > 0.05 relative to controls), marginally toxic (p < 0.05 only), or highly toxic (p < 0.05 and response greater than minimum significant difference relative to controls). This analysis indicated that, when not exceeded, the ERLs and TELs were highly predictive of nontoxicity. The percentages of samples that were highly toxic generally increased with increasing numbers of guidelines (particularly the ERMs and PELs) that were exceeded. Also, the incidence of toxicity increased with increases in concentrations of mixtures of chemicals normalized to (divided by) the SQGs. The ERMs and PELs indicated high predictive ability in samples in which many substances exceeded these concentrations. Suggestions are provided on the uses of these estimates of the predictive ability of sediment guidelines.