In this study, beech wood (Fagus silvatica L.) has been chemically modified with citric acid (Acidum citricum) and sodium hypophosphate (SHP) as the catalyst and gradually thermo-condensed in the dryer. Afterwards, wetting angle, surface energy, and shear strength of glued joints of modified and unmodified wood were determined. Testing of the bond strength according to standard EN 204 and comparison between modified and unmodified samples were executed. The adhesive used for bonding samples was polyvinyl acetate (PVAC), commonly used for gluing solid wood panels. Testing material was divided into three groups (dry, wet, and wet conditioned samples), within which statistical analysis was performed, and the significance of the differences between the modified and unmodified samples was determined. Surface energy is correlated with the bond strength, indicating that modification with citric acid negatively affects the adhesive properties of beech wood. A reduction in the bond strength of modified wood glued with PVAC glue compared to unmodified wood was determined. All the results indicate that the modified samples do not meet the minimum requirements for EN 204 bonded with PVAC glue. Therefore, it will be necessary to conduct further studies using other types of adhesives to investigate whether modified wood might be suitable for gluing.
Steaming beech wood is one of the most commonly used eco-based processes for wood color equilibration. In addition to color equalization, steaming has also been noticed to stabilize the final product (solid wood panels). The beech wood samples used in this study were steamed for two different periods. PVAc and polyurethane (PU) adhesives were used to analyze bonding strength and durability. The bonding strength was measured according to the EN 13354 standard. The samples were treated before testing according to the first part of the standard, i.e., immersion in water. The durability of the bonded joint was tested according to the ISO 9142 standard. The samples were treated before testing with two methods. The results of the bonding strength show the influence of the steaming process on the bonded joint. Short exposure to steam decreased bonding strength, and prolonged exposure increased bonding strength. From the results given and the statistical analysis, it can be concluded that a prolonged steaming period increases the stability of the beech wood and thus the durability of the bonded joints.
SAŽETAK • U konstrukcijama namještaja ugaoni se sklopovi često izvode sastavljanjem uz pomoć dvonavojnih ("trio")
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.