We report on milling and tool wear characteristics of hybrid additive manufacturing comprising laser powder bed fusion and in situ high-speed milling, a particular process in which the cutter mills inside the powder bed without any cooling lubricant being applicable. Flank wear is found to be the dominant wear characteristic with its temporal evolution over utilization period revealing the typical s-shaped dependence. The flank wear land width is measured by microscopy and correlated to the achievable surface roughness of milled 3D-printed parts, showing that for flank wear levels up to 100 μm a superior surface roughness below 3 μm is accessible for hybrid additive manufacturing. Further, based on this correlation recommended tool, life scenarios can be deduced. In addition, by optimizing the finishing tool start position and the number of afore-built layers, the milling process is improved with respect to the maximum millable angle for undercut surfaces of 3D-printed parts to 30∘ for the roughing process and to 40∘ for the entire machining process including finishing.
This study demonstrates and discusses a novel approach for the fabrication and rapid prototyping of monolithic photonic platforms comprising a ridge-type waveguide with integrated sensing structures. First, the bulk injection-molded cyclic olefin copolymer substrates are micromilled in order to define the physical extension of the ridge structure. Cross-sections down to 30 × 30 µm2, exhibiting a mean surface roughness of 300 nm, are achieved with this process. Subsequently, UV radiation is used to modify the ridge structure’s refractive index, which leads to the formation of an optical waveguide. By employing a phase mask, it is possible to equip the photonic platform with a Bragg grating suitable for temperature measurements with a sensitivity of −5.1 pm K-1. Furthermore, an integrated Fabry-Pérot cavity, generated during the micromilling step as well, enables refractive index measurements with sensitivities up to 1154 nm RIU-1.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.