The purpose of the study was to determine the place of motor skills in the motor fitness structure of 9-year-old boys. Materials and methods. The study participants were 48 9-year-old boys. The children and their parents were informed about all the features of the study and gave their consent to participate in the experiment. The study used the following research methods: analysis of scientific and methodological literature, pedagogical observations, testing of motor fitness, probabilistic approach to assessing the learning process, methods of mathematical statistics. In the experiment, the study controlled the level of proficiency in the following exercises: “Rope climbing in two steps”, “Rope climbing in three steps”, “One leg swing upward circle”. Results. The level of fitness of the 9-year-old boys is homogeneous by the development of “agility”, “movement coordination”, “speed strength”, and “endurance”; inhomogeneous – by the development of flexibility, arm strength, vestibular stability, and the level of proficiency in rope climbing. The most informative indicators that determine the level of 9-year-old boys’ motor fitness are: No. 12 “Rope climbing in two steps, level of proficiency” (r = 0.960); No. 13 “Rope climbing in three steps, level of proficiency” (r = 0.960); No. 14 “One leg swing upward circle, level of proficiency” (r = 0.875); No. 10 “Maintenance of stable posture – standing on one leg with closed eyes, s” (r = 0.683). Conclusions. Based on factor analysis, it was found that the level of proficiency in the exercises determines the variation of testing results by 24.287%, and the development of motor skills is a priority in the educational process at primary school. The level of proficiency in rope climbing shows that the exercises are difficult for 9-year-old boys to perform. Based on the data analysis, it can be argued that the comprehensive development of motor abilities ensures the formation of motor skills, and the improvement of the level of development of 9-year-old boys’ arm flexors will positively influence the educational process effectiveness.
The present state of laser glasses production for optoelectronic systems and devices is considered. The limitations of existing laser glasses and the necessity to create new ones have been viewed. The urgency of the development and introduction of new types of laser glass for its use in both civilian and defense equipment sectors is shown. The technological complexity of the phosphate erbium glasses production is substantiated. The purpose of the work is to create laser glasses and make a laser element, will be operating wavelength of 1.54 μm. Optimum concentration of rare earth oxides in laser glasses has been determined. The quality control methodology and technology of laser glasses were developed. The production of a new laser glass makes it possible to use it in modern optoelectronic systems. The laser elements were fabricated and their generation characteristics were investigated. The results of the laser elements industrial testing are presented.
Показана актуальність розробки та впровадження нових технологічних методів підвищення якості оптичного скла для використання його як у цивільних галузях, так і у приладах оборонної сфери. Проаналізовано існуючі методи підвищення якості скла за пузирністю та виявлено їх недоліки при виробництві оптичного скла марки БК (баритовий крон). Здійснено розробку ефективного та економічного методу виробництва цього скла останнім циклом при його багатопередільному наварі із забезпеченням якості першої категорії за пузирністю. Наведені результати промислових випробувань та впровадження розробленого методу виробництва оптичного скла марки БК. Ключові слова: оптичне скло; баритовий крон; технології оптичного скловиробництва; оптико-електронні системи; багатоциклічне виробництво скла; підвищення виходу придатної продукції.
Розглянуто сучасний стан виробництва безкольорових та кольорових оптичних стекол для оптикоелектронних систем ОЕС. Показана актуальність створення вітчизняного інфракрасного скла для використання його як інтерференційного фільтру в ОЕС приладів оборонної галузі. Встановлено фактори, що відповідають за забезпечення повного поглинання у ультрафіолетовій та видимій частинах спектру та максимальне пропускання такого скла при довжині хвилі 1060 нм. Наведені результати досліджень зі створення скломатриць інфракрасних стекол з вказаними характеристиками, високою якістю виробів з них та з відпрацювання технологічних параметрів їх одержання. Ключові слова: оптичне скло; інфракрасне оптичне скло; спектральні характеристики; інтерференційний фільтр; оптико-електронні системи; інфрачервоний спектр; коефіцієнт пропускання.
Показана актуальність дослідження експлуатаційних характеристик вогнетривких матеріалів та конструктивних особливостей теплових агрегатів при виробництві оптичного та спеціального флоат-стекол. Проаналізовано сучасний стан теплових режимів ванних й регенеративних одногоршкових печей та існуючі методи визначення їх слабких вузлів при взаємодії розплавів скла з вогнетривкими футерівками. Для цього було використано найсучасніше діагностичне обладнання. Встановлено характер руйнування бадделеїто-корундових вогнетривів у скловарної печі при виробництві листового флоат-скла за довготривалий період із використанням петрографічних досліджень. Наведено одержані статистичні дані щодо впливу різних типів сировини, що входить до складу вихідних шихт, на фізичне руйнування поверхні вогнетривів. Із урахуванням зміни складу стекол у результаті їхньої взаємодії з поверхнею вогнетривів запропоновано математичне корегування типу та вмісту сировинних компонентів для отримання скла високої якості з необхідними експлуатаційними та оптичними параметрами. Доказано важливість урахування допусків на теплове розширення при капітальному ремонті регенеративної горшкової печі. Виявлено вплив ходу полум'яного потоку на ефективність роботи печі, на основі чого перероблено конструктив газових вікон. Досліджено залежності корозії стін варильного басейну від температури в найбільш агресивних зонах ванної печі. Визначено основні типи оптичних стекол за хімічним складом, які є найбільш агресивними до пічного середовища. У зв'язку з впливом на характер руйнування вогнетривів скла в залежності від його хімічного складу, встановлено необхідне розміщення температурних датчиків для коректного аналізу теплових навантажень на вогнетривкі матеріали. Здійснено модифікацію регенераторної горшкової печі для ефективного та економічного виробництва скла. Наведено результати промислових випробувань та впровадження розроблених методів виробництва високоякісних оптичного та спеціального флоат-стекол із урахуванням підвищення терміну експлуатації. Визначено перспективні напрямки розвитку даної тематики. Ключові слова: оптичне скло; спеціальне флоат-скло; регенеративні печі; технологічні режими виробництва; експлуатаційні властивості вогнетривів; керамічні ємності; освітлення та гомогенізація; промислова діагностика
The current state of technologies for the production of glass products used in the architectural and construction industry, types of the energy-saving float-glasses and their role in the lighting quality of the buildings was analyzed. The relevance of the use of Low-E glass, in particular in the glass units, is shown. Innovative trends in the production of sheet architectural and construction float glass with the use of modern technologies and equipment, in particular, at PJSC "Lysychansk glass factory "Proletary ", considered. It is established that a significant disadvantage of more energy-efficient I-glasses, which have a wide range of color characteristics, is the insufficient mechanical strength of soft coatings applied by magnetron vacuum spraying. It is shown that the technology of manufacturing low-emission I-glasses with such coatings does not allow them to be hardened while maintaining all the necessary operating parameters. Physicochemical properties and operational characteristics of large-sized glasses with silver, sunscreen soft coating, laminated, flat and radial tempered glasses, as well as their areas of application are presented. The principles of strengthening soft magnetron coatings for low-emission Double Low-E glasses and composition, layer combinations and technological parameters of multilayer nanocoatings with a total thickness of up to 140 nm, which allows to harden I-glass with these coatings, investigated. The technological parameters of obtaining low-emission I-glasses with variable coatings, which regulate the spectral and operational indicators of these glassware according to the interstate standards GOST EN 673-2016 and GOST EN 410-2014, are analyzed. Technological methods of the sheet glass with low-emission coatings hardening by creating of the special compositions and optimizing magnetron sputtering processes optimizing, as well as the basic regularities of the arrangement of the film layers of the Si3N4 / NiCr / Si3N4 film for the heat treatment withstanding of the glasses in the R2O – RO – SiO2 system are considered. The principles of adjusting their spectral and mechanical characteristics depending on the concentration and ratio of the components of the thin-film nanolayer, which will contribute to the creation of a variation series of float glasses with the required level of reflection in the infrared spectrum, are proposed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.