Microfluidic platforms have increasingly been explored for in vitro blood diagnostics and for studying complex microvascular processes. The perfusion of blood in such devices is typically achieved through pressure driven setups. Surface tension driven blood flow provides an alternative flow delivery option, and various studies in the literature have examined the behaviour of blood flow in such fluidic devices. In such flows, the influence of red blood cell (RBC) aggregation, the phenomenon majorly responsible for the non-Newtonian nature of blood, requires particular attention. In the present work, we examine differences in the surface tension driven flow of aggregating, non-aggregating RBC, and Newtonian suspensions, in a rectangular micro channel. The velocity fields were obtained using micro-PIV techniques. The analytical solution for blood velocity in the channel is developed utilising the power law model for blood viscosity. The results showed that RBC aggregation has an impact at the late stages of the flow, observed mainly in the bluntness of the velocity profiles. At the initial stages of the flow the shearing conditions are found moderately elevated, preventing intense RBC aggregate formation. As the flow decelerates in the channel RBC aggregation increases, affecting the flow characteristics.
Red blood cell aggregation plays a key role in microcirculatory flows, however, little is known about the transport characteristics of red blood cell aggregates in branching geometries. This work reports on the fluxes of red blood cell aggregates of various sizes in a T-shaped microchannel, aiming to clarify the effects of different flow conditions in the outlet branches of the channel. Image analysis techniques, were utilised, and moderately aggregating human red blood cell suspensions were tested in symmetric (~50-50%) and asymmetric flow splits through the two outlet (daughter) branches. The results revealed that the flux decreases with aggregate size in the inlet (parent) and daughter branches, mainly due to the fact that the number of larger structures is significantly smaller than that of smaller structures. However, when the flux in the daughter branches is examined relative to the aggregate size flux in the parent branch an increase with aggregate size is observed for a range of asymmetric flow splits. This increase is attributed to size distribution and local concentration changes in the daughter branches. The results show that the flow of larger aggregates is not suppressed downstream of a bifurcation, and that blood flow is maintained, for physiological levels of red blood cell aggregation.
Surface tension driven microfluidic flows offer low-cost solutions for blood diagnostics due to the pump-less flow handling. Κnowledge of the influence of the biomechanical properties of blood on such flows is key to design such devices, however a systematic examination of that influence is lacking in the literature. We report on the effects of specific haemorheological factors for flows in a superhydrophilic microchannel. Whole human blood and erythrocyte suspensions in phosphate buffer and Dextran solutions were tested. Heat-treated counterparts of the aforementioned samples were produced to alter the deformability of the cells. The flow of the samples was imaged and characterised using micro-Particle Image Velocimetry and tracking techniques to probe the effects of haematocrit, erythrocyte aggregation and deformability. Meniscus velocities, velocity profiles in the channel, and local and bulk shear rates were derived. The mean velocity of blood was affected by the increasing sample viscosity and the reduced erythrocyte deformability as expected. The increased erythrocyte aggregation appeared to affect more the shape of the velocity profiles in the normal, compared to the heat-treated samples. Very high shear rates are observed in the early stages of the flow, suggesting high erythrocyte disaggregation, persisting sufficiently strong until the flow reaches the end of the channel.
Despite their wide clinical usage, stent functionality may be compromised by complications at the site of implantation, including early/late stent thrombosis and occlusion. Although several studies have described the effect of fluid-structure interaction on local haemodynamics, there is yet limited information on the effect of the stent presence on specific hemorheological parameters. The current work investigates the red blood cell (RBC) mechanical behavior and physiological changes as a result of flow through stented vessels. Blood samples from healthy volunteers were prepared as RBC suspensions in plasma and in phosphate buffer saline at 45% haematocrit. Self-expanding nitinol stents were inserted in clear perfluoroalkoxy alkane tubing which was connected to a syringe, and integrated in a syringe pump. The samples were tested at flow rates of 17.5, 35 and 70 ml/min, and control tests were performed in non-stented vessels. For each flow rate, the sample viscosity, RBC aggregation and deformability, and RBC lysis were estimated. The results indicate that the presence of a stent in a vessel has an influence on the hemorheological characteristics of blood. The viscosity of all samples increases slightly with the increase of the flow rate and exposure. RBC aggregation and elongation index (EI) decrease as the flow rate and exposure increases. RBC lysis for the extreme cases is evident. The results indicate that the stresses developed in the stent area for the extreme conditions could be sufficiently high to influence the integrity of the RBC membrane.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.