Bimetallic nanorods are propelled without chemical fuels in megahertz (MHz) acoustic fields, and exhibit similar behaviors to single-metal rods, including autonomous axial propulsion and organization into spinning chains. Shape asymmetry determines the direction of axial movement of bimetallic rods when there is a small difference in density between the two metals. Movement toward the concave end of these rods is inconsistent with a scattering mechanism that we proposed earlier for acoustic propulsion, but is consistent with an acoustic streaming model developed more recently by Nadal and Lauga ( Phys. Fluids 2014 , 26 , 082001 ). Longer rods were slower at constant power, and their speed was proportional to the square of the power density, in agreement with the acoustic streaming model. The streaming model was further supported by a correlation between the disassembly of spinning chains of rods and a sharp decrease in the axial speed of autonomously moving motors within the levitation plane of the cylindrical acoustic cell. However, with bimetallic rods containing metals of different densities, a consistent polarity of motion was observed with the lighter metal end leading. Speed comparisons between single-metal rods of different densities showed that those of lower density are propelled faster. So far, these density effects are not explained in the streaming model. The directionality of bimetallic rods in acoustic fields is intriguing and offers some new possibilities for designing motors in which shape, material, and chemical asymmetry might be combined for enhanced functionality.

The breadth of the molecular weight distributions (MWD) of polymers influences their physical properties; however, no synthetic methods allow precise control of the exact shape and composition of a distribution. We report a modular strategy that enables deterministic control over polymer MWD through temporal regulation of initiation in nitroxide-mediated polymerization reactions. This approach is applicable to any controlled polymerization that uses a discrete initiator, and it allows the use of MWD composition as a parameter to tune material properties.

No abstract

Varying molecular weight distributions (MWDs) have the potential to precisely tune polymer properties, but this approach remains relatively unexplored owing to a lack of synthetic methods that provide control over the exact makeup of a distribution. Herein, we report a simple and highly efficient strategy for addressing this challenge through temporal regulation of initiation in the anionic polymerization of styrene. This method yields unprecedented control over the shape of the polymer MWD and facilitates the synthesis of diblock copolymers with controlled MWD compositions. Importantly, we show that the MWD symmetry has a marked influence on the stiffness of poly­(styrene-block-isoprene) copolymers, which demonstrates that varying MWD shape is an effective method for altering polymer properties.

Segmented gold-ruthenium nanorods (300 ± 30 nm in diameter and 2.0 ± 0.2 μm in length) with thin Ni segments at one end assemble into few-particle, geometrically regular dimers, trimers, and higher multimers while levitated in water by ∼4 MHz ultrasound at the midpoint of a cylindrical acoustic cell. The assembly of the nanorods into multimers is controlled by interactions between the ferromagnetic Ni segments. These assemblies are propelled autonomously in fluids by excitation with ∼4 MHz ultrasound and exhibit several distinct modes of motion. Multimer assembly and disassembly are dynamic in the ultrasonic field. The relative numbers of monomers, dimers, trimers, and higher multimers are dependent upon the number density of particles in the fluid and their speed, which is in turn determined by the ultrasonic power applied. The magnetic binding energy of the multimers estimated from their speed-dependent equilibria is in agreement with the calculated strength of the magnetic dipole interactions. These autonomously propelled multimers can also be steered with an external magnetic field and remain intact after removal from the acoustic chamber for SEM imaging.

We report a method for tuning the domain spacing ( D) of self-assembled block copolymer thin films of poly(styrene- block-methyl methacrylate) (PS- b-PMMA) over a large range of lamellar periods. By modifying the molecular weight distribution (MWD) shape (including both the breadth and skew) of the PS block via temporal control of polymer chain initiation in anionic polymerization, we observe increases of up to 41% in D for polymers with the same overall molecular weight ( M ≈ 125 kg mol) without significantly changing the overall morphology or chemical composition of the final material. In conjunction with our experimental efforts, we have utilized concepts from population statistics and least-squares analysis to develop a model for predicting D based on the first three moments of the MWDs. This statistical model reproduces experimental D values with high fidelity (with mean absolute errors of 1.2 nm or 1.8%) and provides novel physical insight into the individual and collective roles played by the MWD moments in determining this property of interest. This work demonstrates that both MWD breadth and skew have a profound influence over D, thereby providing an experimental and conceptual platform for exploiting MWD shape as a simple and modular handle for fine-tuning D in block copolymer thin films.

Molecular weight and dispersity (Ð) influence physical and rheological properties of polymers, which are of significant importance in polymer processing technologies. However, these parameters provide only partial information about the precise composition of polymers, which is reflected by the shape and symmetry of molecular weight distribution (MWD). In this work, the effect of MWD symmetry on thermal and rheological properties of polymers with identical molecular weights and Ð is demonstrated. Remarkably, when the MWD is skewed to higher molecular weight, a higher glass transition temperature (T ), increased stiffness, increased thermal stability, and higher apparent viscosities are observed. These observed differences are attributed to the chain length composition of the polymers, easily controlled by the synthetic strategy. This work demonstrates a versatile approach to engineer the properties of polymers using controlled synthesis to skew the shape of MWD.

The molecular weight distributions (MWDs) of block copolymers significantly impact their morphological phase behavior, but exploiting these features as a means to tune material properties has been limited to the MWD breadth, or dispersity (Đ). Manipulation of the entire MWD has promising potential to address this challenge by providing a convenient and versatile route toward tailoring polymer nanostructure. Herein, we describe the self-assembly of poly­(styrene)-block-poly­(2-vinylpyridine) (PS-b-P2VP) where the PS blocks have systematically deviating compositions of molecular weights. We find that controlling the MWD shape, breadth and skew, afforded access to different morphologies in samples with the same molecular characteristics, including Đ. As such, we illustrate the generality and effectiveness of this strategy and anticipate that it will facilitate the increased deployment of disperse polymer compositions in advanced materials applications.