In this investigation, a hydrogen peroxide (H2O2) electrochemical sensor was evaluated. Prussian blue (PB) was electrodeposited at a glassy carbon (GC) electrode modified with titanium dioxide– and zirconia-doped functionalized carbon nanotubes (TiO2.ZrO2-fCNTs), obtaining the PB/TiO2.ZrO2-fCNTs/GC-modified electrode. The morphology and structure of the nanostructured material TiO2.ZrO2-fCNTs was characterized by transmission electron microscopy, the specific surface area was determined via Brunauer–Emmett–Teller, X-ray diffraction, thermogravimetric analysis, and Fourier transform infrared spectroscopy. The electrochemical properties were studied by cyclic voltammetry and chronoamperometry. Titania-zirconia nanoparticles (5.0 ± 2.0 nm) with an amorphous structure were directly synthesized on the fCNT walls, aged during periods of 20 days, obtaining a well-dispersed distribution with a high surface area. The results indicated that the TiO2.ZrO2-fCNT–nanostructured material exhibits good electrochemical properties and could be tunable by enhancing the modification conditions and method of synthesis. Covering of the nanotubes with TiO2-ZrO2 nanoparticles is one of the main factors that affected immobilization and sensitivity of the electrochemical biosensor. The electrode modified with TiO2-ZrO2 nanoparticles with the 20-day aging time was superior regarding its reversibility, electric communication, and high sensitivity and improves the immobilization of the PB at the electrode. The fabricated sensor was used in the detection of H2O2 in whey milk samples, presenting a linear relationship from 100 to 1,000 μmol L−1 between H2O2 concentration and the peak current, with a quantification limit (LQ) of 59.78 μmol L−1 and a detection limit (LD) of 17.93 μmol L−1.

No abstract

Treating domestic wastewater has become more and more complicated due to the high content of different types of detergents. In this context, advanced electro-oxidation (AEO) has become a powerful tool for complex wastewater remediation. The electrochemical degradation of surfactants present in domestic wastewater was carried out using a DiaClean® cell in a recirculation system equipped with boron-doped diamond (BDD) as the anode and stainless steel as the cathode. The effect of recirculation flow (1.5, 4.0 and 7.0 L min−1) and the applied current density (j = 7, 14, 20, 30, 40, and 50 mA cm−2) was studied. The degradation was followed by the concentration of surfactants, chemical oxygen demand (COD), and turbidity. pH value, conductivity, temperature, sulfates, nitrates, phosphates, and chlorides were also evaluated. Toxicity assays were studied through evaluating Chlorella sp. performance at 0, 3, and 7 h of treatment. Finally, the mineralization was followed by total organic carbon (TOC) under optimal operating conditions. The results showed that applying j = 14 mA cm−2 and a flow rate of 1.5 L min−1 during 7 h of electrolysis were the best conditions for the efficient mineralization of wastewater, achieving the removal of 64.7% of surfactants, 48.7% of COD, 24.9% of turbidity, and 44.9% of mineralization analyzed by the removal of TOC. The toxicity assays showed that Chlorella microalgae were unable to grow in AEO-treated wastewater (cellular density: 0 × 104 cells ml−1 after 3- and 7-h treatments). Finally, the energy consumption was analyzed, and the operating cost of 1.40 USD m−3 was calculated. Therefore, this technology allows for the degradation of complex and stable molecules such as surfactants in real and complex wastewater, if toxicity is not taken into account.

El mercurio es considerado un contaminante altamente peligroso debido a su elevada toxicidad y a su carácter acumulativo. Presenta varios efectos en la salud humana tales como: trastornos del sistema nervioso, deterioro intelectual, problemas gastrointestinales y cáncer. El uso de técnicas electroquímicas es una alternativa para la cuantificación de mercurio a niveles traza, debido a su bajo costo y buena sensibilidad. En este trabajo de investigación se evaluó un microelectrodo de fibra de carbono modificado con nanopartículas de oro para la determinación de mercurio (II) en medio acuoso. Se realizó la modificación superficial de la fibra de carbono electrodepositando nanopartículas de oro, a un potencial de -0,1 V durante 100 s, y se utilizó microscopía electrónica de barrido y voltamperometría cíclica para confirmar la presencia de nanopartículas de oro. Se cuantificó el mercurio (II) mediante voltamperometría de redisolución anódica de pulso diferencial. Se obtuvo un rango lineal, en la curva de calibración, entre 50 - 100 µg L-1 de mercurio (II). Los límites de detección y de cuantificación obtenidos fueron de 38 y 46 µg L-1, respectivamente. La validación de la metodología se realizó mediante porcentaje de recuperación, obteniendo valores entre 94 y 104 % y desviación estándar relativa (RSD, por sus siglas en inglés) entre 3,6 y 4,7 %. El método propuesto muestra características útiles para su implementación en el monitoreo de contaminación por mercurio.