No abstract

In permafrost regions, long distance buried pipelines are widely used to transport oil and natural gas resources. However, pipeline problems occur frequently due to the complicated surrounding environment and transportation requirement of positive temperature. In this study, a thermal insulation layer was applied to mitigate permafrost degeneration around the buried oil-gas pipelines. Based on engineering background of the Sebei-Xining-Lanzhou natural gas pipeline in China, an indoor model test was designed and carried out in which many key indices, such as the temperature regime, vertical displacement, pipeline wall stress, and water content, were closely monitored. The test results indicate that the large heat loss of the buried pipeline produces a rapid increase in ground temperatures which seriously reduces the bearing capacity of the permafrost foundation. The buried oil-gas pipelines with a thermal insulation layer can effectively reduce the thawing range and vertical displacement of the permafrost foundation around the buried pipelines, so as to control the stress of the pipeline wall in the normal range and protect the safe and stable operation of the buried oil-gas pipelines. The experimental results can serve as a reference for the construction, operation, and maintenance of buried oil-gas pipelines in permafrost regions.

No abstract

No abstract

No abstract

No abstract

No abstract

This study focused on the coupling heat transfer mechanism and the cooling efficiency of L-shaped two-phase closed thermosyphons (L-shaped TPCTs) in the wide subgrade of permafrost regions. Considering the fact that time–space dynamics change the effects of the air temperature, wind speed, and geotemperature, a coupled air temperature–L-shaped TPCT–subgrade soil heat transfer model was established using the ANSYS 15.0 software platform, and the rationality of the model was verified through measured data. The heat-transfer characteristics of the L-shaped TPCTs and the long-term thermal stability of the subgrade were studied under different inclination angles of the evaporator (α = 15°, 30°, 50°, 70°, and 90°). Then, the cooling effectiveness of a composite subgrade with TPCTs and an XPS insulation board was numerically calculated. The results show that the heat flux of the L-shaped TPCT was the greatest when α = 50°, and the heat flux reached the maximum value of 165.7 W·m−2 in January. The L-shaped TPCT had a relatively good cooling effect on the subgrade as a whole when α = 50° and 70°, but the thawing depth at the center of the subgrade with L-shaped TPCTs reached 9.0 m below the ground surface in the 30th year. The composite subgrade with L-shaped TPCTs/vertical TPCT/XPS insulation board is an effective method to protect the permafrost foundation and improve the long-term thermal stability of the wide subgrade. The maximum heat flux of evaporation section of the L-shaped TPCT is 18.8% higher than that of the vertical TPCT during the working period of the TPCTs of the composite subgrade.