Nanostructured iodine-post doped amorphous carbon (a-C:I) thin films were prepared from camphor oil using a thermal chemical vapor deposition (TCVD) technique at different doping temperatures. The structural properties of the films were studied by field-emission scanning electron microscopy (FESEM), energy-dispersive spectroscopy (EDS), Raman, and Fourier transform infrared (FTIR) studies. FESEM and EDS studies showed successful iodine doping. FTIR and Raman studies showed that the a-C:I thin films consisted of a mixture of sp2- and sp3-bonded carbon atoms. The optical and electrical properties of a-C:I thin films were determined by UV–vis–NIR spectroscopy and current–voltage (I–V) measurement respectively. The optical band gap of a-C thin films decreased upon iodine doping. The highest electrical conductivity was found at 400 °C doping. Heterojunctions are confirmed by rectifying the I–V characteristics of an a-C:I/n-Si junction.
This work studies the effects of annealing temperature ranging from 100-500 ºC towards its physical and optical properties. FESEM images showed that the structural properties of tetrapod nanostructured ZnO thin film were affected by the annealing temperature. The thickness of thin film is strongly support the FESEM analysis. The optical band gap energy (E g ) was evaluated at 2.78 -3.06 eV, which the ZnO thin film was found to be influenced by the change of interatomic spacing of semiconductor. The result shows that the higher annealing temperature greatly affects the physical structure of tetrapod nanostructured ZnO thin film to become narrow and longer length.
The influence of thermal annealing on the surface morphologies and structural characteristics of zinc oxide (ZnO) nanopowders synthesized via the solution immersion method for triboelectric nanogenerator applications is reported in this paper. The ZnO nanopowders were thermally treated at different temperatures of annealing in the ranges between 300°C to 700°C for 1 hour, and their surface morphologies and structural properties were studied using field emission scanning electron microscopy (FESEM) and X-ray diffraction (XRD) analysis. The ZnO nanopowders have a polycrystalline, hexagonal wurtzite structure and are composed of ZnO nanoparticles and hexagonal nanorods. ZnO based tribolectric nanogenerators were fabricated with these nanopowders and their performance was assessed in terms of the output voltage. It is found that the ZnO based triboelectric nanogenerator fabricated with ZnO nanopowders annealed at 500°C has superior performance compared with the other nanogenerators, with an average output voltage of 1.95 V. This corresponds to a fourfold increase in output voltage relative to that of the ZnO based triboelectric nanogenerator fabricated with as-deposited ZnO nanopowders. In conclusion, thermal annealing significantly influences particle size and crystallinity of ZnO nanopowders, which in turn, influences the output voltage of ZnO based triboelectric nanogenerators.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.