Because of their high aspect ratio, nanostructures are particularly susceptible to effects from surfaces such as slow electron trapping by surface states. However, nonequilibrium trapping dynamics have been largely overlooked when considering transport in nanoelectronic devices. In this study, we demonstrate the profound influence of dynamic trapping processes on transport in InAs nanowires through an investigation of the hysteretic and time-dependent behavior of the transconductance. We observe large densities (∼10 cm) of slow surface traps and demonstrate the ability to control and permanently fix their occupation and charge through electrostatic manipulation by the gate potential followed by thermal deactivation by cryogenic cooling. Furthermore, we observe a transition from enhancement- to depletion-mode and a 400% change in field-effect mobility within the same device when the initial gate voltage and sweep rate are varied, revealing the severe impact of electrostatic history and dynamics on InAs nanowire field-effect transistors. A time-dependent model for nanowire transconductance based on nonequilibrium carrier population dynamics with thermally activated capture and emission was constructed and showed excellent agreement with experiments, confirming the effects to be a direct result of the dynamics of slow surface traps characterized by large thermal activation barriers (∼ 700 meV). This work reveals a clear and direct link between the electrical conductivity and the microscopic interactions of charged species with nanowire surfaces and highlights the necessity for considering dynamic properties of surface states in nanoelectronic devices.

Nanowire-based field-effect transistors (FETs) have demonstrated considerable promise for a new generation of chemical and biological sensors. Indium arsenide (InAs), by virtue of its high electron mobility and intrinsic surface accumulation layer of electrons, holds properties beneficial for creating high performance sensors that can be used in applications such as point-of-care testing for patients diagnosed with chronic diseases. Here, we propose devices based on a parallel configuration of InAs nanowires and investigate sensor responses from measurements of conductance over time and FET characteristics. The devices were tested in controlled concentrations of vapour containing acetic acid, 2-butanone and methanol. After adsorption of analyte molecules, trends in the transient current and transfer curves are correlated with the nature of the surface interaction. Specifically, we observed proportionality between acetic acid concentration and relative conductance change, off current and surface charge density extracted from subthreshold behaviour. We suggest the origin of the sensing response to acetic acid as a two-part, reversible acid-base and redox reaction between acetic acid, InAs and its native oxide that forms slow, donor-like states at the nanowire surface. We further describe a simple model that is able to distinguish the occurrence of physical versus chemical adsorption by comparing the values of the extracted surface charge density. These studies demonstrate that InAs nanowires can produce a multitude of sensor responses for the purpose of developing next generation, multi-dimensional sensor applications.

Because of the continued scaling of transistor dimensions and incorporation of nanostructured materials into modern electronic and optoelectronic devices, surfaces and interfaces have become a dominant factor dictating material properties and device performance. In this study, we investigate the temperature-dependent electronic transport properties of InAs nanowire field-effect transistors. A point where the nanowire conductance becomes independent of temperature is observed, known as the zero-temperature-coefficient. The distribution of surface states is determined by a spectral analysis of the conductance activation energy and used to develop a carrier transport model that explains the existence and gate voltage dependence of this point. We determine that the position of this point in gate voltage is directly related to the fixed oxide charge on the nanowire surface and demonstrate the utility of this method for studying surface passivations in nanoscale systems by characterizing (NH)S and H plasma surface treatments on InAs nanowires.

Much recent attention has been focused on the development of field-effect transistors based on low-dimensional nanostructures for the detection and manipulation of molecules. Because of their extraordinarily high charge sensitivity, InAs nanowires present an excellent material system in which to probe and study the behavior of molecules on their surfaces and elucidate the underlying mechanisms dictating the sensor response. So far, chemical sensors have relied on slow, activated processes restricting their applicability to high temperatures and macroscopic adsorbate coverages. Here, we identify the transition into a highly sensitive regime of chemical sensing at ultralow concentrations (<1 ppm) via physisorption at room temperature using field-effect transistors with channels composed of several thousand InAs nanowires and ethanol as a simple analyte molecule. In this regime, the nanowire conductivity is dictated by a local gating effect from individual dipoles, leading to a nonlinear enhancement of the sensitivity. At higher concentrations (>1 ppm), the nanowire channel is globally gated by a uniform dipole layer at the nanowire surface. The former leads to a dramatic increase in sensitivity due to weakened screening and the one-dimensional geometry of the nanowire. In this regime, we detect concentrations of ethanol vapor as low as 10 ppb, 100 times below the lowest concentrations previously reported. Furthermore, we demonstrate electrostatic control of the sensitivity and dynamic range of the InAs nanowire-based sensor and construct a unified model that accurately describes and predicts the sensor response over the tested concentration range (10 ppb to 10 ppm).