Porous metals and metallic foams are presently the focus of very active research and development activities. There are currently around 150 institutions working on metallic foams worldwide, most of them focussing on their manufacture and characterisation. Various companies are developing and producing these materials which are now being used in numerous industrial applications such as lightweight structures, biomedical implants, filters, electrodes, catalysts, and heat exchangers. This review summarizes recent developments on these materials, with particular emphasis on research presented at the latest International Conference on Porous Metals and Metallic Foams (MetFoam 2007).

NiTi foams are unique among biocompatible porous metals because of their high recovery strain (due to the shape-memory or superelastic effects) and their low stiffness facilitating integration with bone structures. To optimize NiTi foams for bone implant applications, two key areas are under active study: synthesis of foams with optimal architectures, microstructure and mechanical properties; and tailoring of biological interactions through modifications of pore surfaces. This article reviews recent research on NiTi foams for bone replacement, focusing on three specific topics: (i) surface modifications designed to create bio-inert porous NiTi surfaces with low Ni release and corrosion, as well as bioactive surfaces to enhance and accelerate biological activity; (ii) in vitro and in vivo biocompatibility studies to confirm the long-term safety of porous NiTi implants; and (iii) biological evaluations for specific applications, such as in intervertebral fusion devices and bone tissue scaffolds. Possible future directions for bio-performance and processing studies are discussed that could lead to optimized porous NiTi implants.

No abstract

No abstract

Because of their excellent mechanical properties, low density and biocompatibility, titanium foams are attractive for structural and biomedical applications. This paper reviews current techniques for titanium foam processing, which are all based on powder‐metallurgy because of the extreme reactivity of liquid titanium. A first group of processes is based on powder sintering with or without place‐holder or scaffolds. A second group relies on expansion of pressurized pores created during prior powder densification.

The magnetic shape-memory alloy Ni-Mn-Ga shows, in monocrystalline form, a reversible magnetic-field-induced strain (MFIS) up to 10%. This strain, which is produced by twin boundaries moving solely by internal stresses generated by magnetic anisotropy energy, can be used in actuators, sensors and energy-harvesting devices. Compared with monocrystalline Ni-Mn-Ga, fine-grained Ni-Mn-Ga is much easier to process but shows near-zero MFIS because twin boundary motion is inhibited by constraints imposed by grain boundaries. Recently, we showed that partial removal of these constraints, by introducing pores with sizes similar to grains, resulted in MFIS values of 0.12% in polycrystalline Ni-Mn-Ga foams, close to those of the best commercial magnetostrictive materials. Here, we demonstrate that introducing pores smaller than the grain size further reduces constraints and markedly increases MFIS to 2.0-8.7%. These strains, which remain stable over >200,000 cycles, are much larger than those of any polycrystalline, active material.

No abstract

No abstract