Thermocycler processing (TCO) of metals and alloys belongs to one of the most effective ways to obtain the structure of structural steels with a given degree of dispersion. However, the development of thermocycler processing modes in each case is individual in nature and cannot be mechanically transferred from one material to another. Therefore, it is necessary to consider the structural changes in metals during TCO using examples of steels belonging to different groups so that from the whole variety of processes, dissolution and precipitation of phases, stresses and strains, only those that allow you to obtain a given optimal fine-grained structure are selected. Based on the obtained data, we plotted the dependence of the magnetic field strength Hp on the number of cycles during thermal cycling. A comparative analysis of the obtained results is made and conclusions are drawn on the relationship between the magnetic parameter Hp and structural changes in steels during TCO.
Investment in construction projects is a rather complex process. The customer of construction product, as a rule, is also its investor and for him the systematization of information about the construction process is a necessity. Construction investment control (CIC) is an integral part of the building construction process. Such control is a separate service that is necessary for the customer to objectively understand the installed work volumes and forecast deadlines. Completed construction and installation works are confirmed by acts of acceptance of the completed works, which are subsequently the basis for payment for the work done. In this paper, we developed a methodology for managing investments in construction, as well as their control using modern BIM technologies. The effectiveness of using 3D modelling in investment control was demonstrated on the example of a residential complex. In addition, the volume of work obtained from the 3D-model was compared with the volume of work calculated manually. As a result, the exact amount of work and schedules for forecasting investment of funds were obtained.
Introduction. Were investigated samples of fiberglass with the aim of its effective use in construction in the long term. Fiberglass is considered one of the most versatile and durable materials among polymer composite materials, however, and it is subject to destruction. It is known that one of the main reasons for reducing the specified characteristics and material properties is operational. At the design stage, it is necessary to determine the most reliable and economical materials used and, accordingly, be sufficiently aware of their strength and durability. Thus, in order to avoid the destruction of the material, as well as significantly enhance and prolong its service life, it is necessary to be aware of how exactly the properties of the material change over time. Regarding reinforced concrete, wood, brick and steel fiberglass is used in construction recently. This means that while the service life of the list of the most common materials in construction is known to a sufficient extent, manufacturers do not dare to use fiberglass as a material for critical structures. This occurs because changes in its characteristics, depending on operational factors, are not sufficiently studied for intervals exceeding 4-5 years of operation. Materials and methods. During the work, samples of fiberglass SPPS with a longitudinal and transverse arrangement of fiberglass were tested for climatic aging in a climatic chamber for 5 cycles simulating 5 years of material operation. All samples were subjected to tensile testing on a tensile testing machine R-5. Results. Destructive stresses were determined, calculations were carried out and elastic and strength characteristics of the samples were analyzed. On the basis of the obtained results, an analysis was carried out, conclusions were formulated about the use of fiberglass in the construction in the long term, as well as the influence of such operational factors as moisture, positive and negative temperatures, and ultraviolet radiation on the properties of fiberglass with a different arrangement of fiberglass. Conclusions. Found that the destructive stresses of fiberglass are significantly reduced during the first two years of operation, which must be considered when choosing fiberglass with the stated characteristics. Ultraviolet does not have a significant effect on the elastic-strength properties of the material, while during operat
Introduction. Pultruded fiberglass can be called the material of the future due to its properties — high strength, low weight, resistance to aggressive environment. Important aspects for the development of composite materials are surface treatment methods and methods of connecting structural elements. Glue compound has proven itself as the most effective, but there remains a need to conduct studies of its durability. The method of accelerated cyclic thermal tests allows to determine the expected changes in the strength of adhesive bonding in a short time. Materials and methods. Samples, which are three glued plates of SPPS fiberglass construction, were processed in a climate chamber and after each cycle they were tested on a GRM-1 machine. One climatic test cycle included being in a chamber with high humidity and temperature and then moving into the cold chamber. The specimens were tested prior to spalling, and the resulting disruptive stresses were recorded. The last test cycle corresponded to five years of operation of the structure. Results. The tests of the samples showed a significant change in the characteristics of the compounds over time. In the first two years of operation, a decrease in strength of 25 % is expected. The last characteristic test point, corresponding to five years, showed a drop to 60 % of the initial characteristics. Conclusions. The results should be considered at the design stage of supporting structures that are not protected from contact with the external environment. The factors of strength reduction after 100 years may be included in the regulatory documents for the calculation of especially important structures.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.