Medium frequency transformers (MFTs) are a key component of DC–DC dual active bridge (DAB)-type converters. These technologies are becoming a quintessential part of renewable energy solutions, such as photovoltaic systems and wind energy power plants, as well as in modern power grid interfaces functioning as solid-state transformers in smart-grid environments. The weight and physical dimensions of an MFT are key data for the design of these devices. The size of an MFT is reduced by increasing its operating frequency. This reduction implicates higher power density through the transformer windings, as well as other design requirements distinct to those used for conventional 60/50 Hz transformers; therefore, new MFT design procedures are needed. This paper introduces a novel methodology for designing MFTs, using nanocrystalline cores, and tests it using an MFT–DAB lab prototype. Different to other MFT design procedures, this new design approach uses a modified version of the area-product technique, which consists of smartly modifying the core losses computation, and includes nanocrystalline cores. The core losses computation is supported by a full analysis of the dispersion inductance. For purposes of validation, a model MFT connected to a DAB converter is simulated in Matlab-Simulink (The MathWorks, v2014a, Mexico City, Mexico). In addition, a MFT–DAB lab prototype (1 kVA at 5 kHz) is implemented to experimentally probe further the validity of the methodology just proposed. These results demonstrate that the analytic calculations results match those obtained from simulations and lab experiments. In all cases, the efficiency of the MFT is greater than 99%.

In the article by Ruiz et al. that appears in the Journal of Microbiology 2011; 49, 902-912. On page 902, the names and affiliations of first and third author, Dante Ruiza and Patrice de Werrab, should be changed as follows.

High performance, highly efficient DC-DC converters play a key role in improving the penetration of renewable energy sources in the context of smart grids in applications such as solid-state transformers, built-in power drives in electric vehicles and interfacing photovoltaic and wind-power systems. Advanced medium-frequency transformers (MFTs) are fundamental to enhance DC-DC converters and determining its behavior, therefore MFT design procedures have become increasingly important in this context. This paper investigates which type of core material, between nanocrystalline and silicon steel, has the best properties for designing MFTs for distinct applications. Unlike to other proposals, in this work, two 1 kVA-120 V/240 V-1 kHz lab MFT prototypes, with a different type of core material, are developed for the purpose of comparing its physical characteristics, behavior, and performance under real-life conditions. A final section, the experimental results show that the nanocrystalline MFT has greater power density and efficiency. The results of this work introduce nanocrystalline MFTs as an option in a wider range of applications in niches in which other materials are currently used.

No abstract

The development of Medium Frequency Transformers (MFTs) from a novel perspective is essential for the advancement of today´s various relevant applications such as the emerging solid-state transformers, along with interfaces for the interconnection of photovoltaic parks and electric vehicles. The analysis, design and implementation of MFTs pursuing the achievement of characteristics such as high power density, high efficiency, and a specific dispersion inductance is a key goal for designers. There are several parameters and design methods that influence the final performance of an MFT, such as the geometry and material of the core. The advantages/disadvantages of each material/geometry combination, about the dispersion inductance for instance, are not well known, even considering a single material but various geometries. This paper presents the analysis, design and experimental development of three nanocrystalline-core MFTs, each one with a different core geometry (toroidal, type CC and shell-type). The purpose of this work is to evaluate and compare the most favourable characteristics and performance of each type of geometry, tested at 5 kHz and 1.75 kVA. The cases studied, in simulation and experimentation with scaled prototypes, focus on evaluating the power density, the core losses, the winding losses, the geometric dimensions, and the dispersion inductance obtained in each MFT, as well as its performances operating with sinusoidal and square waveforms. The results show that: 1) the toroid core has higher efficiency; 2) the shell core has the lowest dispersion inductance and is easier to build, and 3) the CC type has the highest dispersion inductance. This new information is a step to further understand how to get more controllable, more efficient MFTS, with a higher power density and lower cost, depending on the intended application of cutting-edge DC-DC DAB-type converters.