RESUMO:Este trabalho foi desenvolvido com o objetivo de ajustar equações que estimam a perda distribuída de carga em microtubos utilizados em microaspersão e a perda localizada de carga na passagem lateral do fluxo por meio dos conectores na linha lateral. A perda distribuída de carga foi determinada em quatro diâmetros de microtubos com nove a dez repetições para 15 vazões, por meio da aplicação do teorema de Bernoulli. O fator de atrito (f) foi estimado fixando-se o valor de m = 0,25 e calibrando-se o valor do parâmetro c (0,290). A perda localizada de carga foi determinada por diferença entre perda de carga no microtubo mais conector e perda de carga no microtubo. Dois modelos de conectores foram utilizados e caracterizados quanto ao diâmetro interno e dimensões. Uma aproximação matemática foi proposta para calcular a perda localizada de carga com base em coeficiente de carga cinética do conector (K'), que leva em consideração as dimensões do conector e do microtubo e independência das forças viscosas para Re > 5.000. As variações de vazão e de pressão entre os emissores situados nos extremos da linha lateral mostraram-se sensíveis à perda de carga na passagem lateral pelo conector mais a perda de carga no microtubo.PALAVRAS-CHAVE: perda localizada de carga, perda distribuída de carga, comprimento equivalente, coeficiente de carga cinética. HEAD LOSS IN MICROTUBES AND CONNECTORS USED IN MICROSPRINKLER SYSTEMSABSTRACT: This work was carried out aimed at presenting equations to estimate the continuous head loss in microtubes and the local head loss in the connector used on microsprinklers lateral lines. The continuous head loss was determined using Bernoulli´s theorem for four microtubes diameters, each one with nine to ten replications for 15 flowrates. The Darcy-Weisbach friction factor was estimated by setting m to 0.25 and by calibrating the parameter value c to 0.290. The local head loss was determined by subtracting the head loss on the connector and microtube from the head loss on the microtube. Two types of connectors were used and characterized by its internal diameters and its dimensions. A mathematical approach to compute the local head loss was proposed based on a kinetic head connector coefficient (K'). This coefficient is a function of connector and microtube dimensions and independent of viscous forces up to Re > 5,000. Flowrate and pressure at emitters located at the far end of the lateral line were sensitive the head losses at the connectors and in the microtube.
Local head losses in the connectors used in microirrigationLocal losses are often neglected in design of irrigation systems affecting the uniformity of water application. Some accessories have no simple and efficient equations to estimate these losses. The main objective of this work was to develop an equation to estimate the local head loss in the lateral passage connectors. 11 models of connectors in 12 different diameters of pipes were tested forming 15 groups of pipe/connector. The connectors were characterized by its internal diameters and dimensions. The local head loss was determined by subtracting the head loss on the connector and pipe from the head loss on the pipe. The parameters affecting the local head loss were defined as dimensionless terms using Buckingham's theorem. A mathematical model was developed and presented a determination coefficient of 93.31%. Elements such as inner diameter of the connector and pipe length, connector, water flow velocity, Reynolds number and Froude number influenced the local head loss in the connectors. The model was compared with the observed data and presented a performance classified as excellent and can be used in calculating of the local head loss in the lateral passage connectors.
O cultivo do maracujazeiro-azedo é uma importante atividade econômica para a agricultura familiar do litoral no Sul Catarinense. Em sistema de cultivo anual, a cultura exige a suplementação de água através de irrigação localizada para viabilizar a produção precoce de frutas nos meses de maior risco de déficit hídrico. O objetivo deste trabalho foi avaliar a necessidade de irrigação na cultura do maracujazeiro-azedo em Neossolos Quartzarênicos, no município de Sombrio, SC. Foi processado o balanço hídrico diário para Sombrio, no período de 1979 a 2019. Foram considerados três valores de Capacidade de Armazenamento de Água Disponível (25, 37 e 50mm). Os valores de Kc foram considerados de acordo com a fase da cultura. Sempre que foi atingido o valor de lâmina de água facilmente disponível (mm), o modelo simulou a necessidade de irrigação. Para solos com CAD de 25mm (situação mais extrema), a média de lâmina de irrigação é de 540mm, variando de 367 (no ano de 1984) a 665mm (no ano de 2012) e o número de irrigações anuais varia de 26 a 47, com média de 38. A suplementação de água via irrigação é necessária nas condições edafoclimáticas do município de Sombrio. Na média dos anos, deve-se suplementar os cultivos de maracujazeiro-azedo entre 400 e 540mm em 15 a 38 irrigações durante o ciclo produtivo, principalmente nos meses de novembro a fevereiro, que são os de maior risco de déficit hídrico.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.