The roles of growth direction and Si content on the columnar/equiaxed transition and on dendritic spacings of Al–Cu–Si alloys still remain as an open field to be studied. In the present investigation, Al–6 wt-Cu–4 wt-Si and Al–6 wt-Cu alloys were directionally solidified upwards and horizontally under transient heat flow conditions. The experimental results include tip growth rate and cooling rates, optical microscopy, scanning electron microscopy energy dispersive spectrometry and dendrite arm spacings. It was found that silicon alloying contributes to significant refinement of primary/secondary dendritic spacings for the upward configuration as compared with corresponding results of the horizontal growth. Experimental growth laws are proposed, and the effects of the presence/absence of solutal convection in both growth directions are discussed.

The main purpose of this paper is to investigate both the columnar to equiaxed transition and primary dendritic arm spacings of Al-3wt.%Si alloy during the horizontal directional solidification. The transient heat transfer coefficient at the metal-mold interface is calculated based on comparisons between the experimental thermal profiles in castings and the simulations provided by a finite difference heat flow program. Simulated curve of the interfacial heat transfer coefficient was used in another numerical solidification model to determine theoretical values of tip growth rates, cooling rates and thermal gradients that are associated with both columnar to equiaxed transition and primary dendritic arm spacings. A good agreement was observed between the experimental values of these thermal variables and those numerically simulated for the alloy examined. A comparative analysis is carried out between the experimental data of this work and theoretical models from the literature that have been proposed to predict the primary dendritic spacings. In this context, this study may contribute to the understanding of how to manage solidification operational parameters aiming at designing the microstructure of Al-Si alloys.

No abstract

No abstract

No abstract

Experiments were conducted to investigate the influence of thermal parameters on the columnar to equiaxed transition during the horizontal unsteady-state directional solidification of Al-Si alloys. The parameters analyzed include the heat transfer coefficients, growth rates, cooling rates, temperature gradients and composition. A combined theoretical and experimental approach is developed to determine the solidification thermal variables considered. The increasing solute content in Al-Si alloys was not found to affect significantly the experimental position of the CET which occurred for cooling rates in the range between 0.35 and 0.64 K/s for any of three alloy compositions examined. A comparative analysis between the results of this work and those from the literature proposed to analyze the CET during upward vertical solidification of Al-Si alloys is reported and the results have shown that the end of the columnar region during horizontal directional solidification is abbreviated as a result of about six times higher thermal gradient than that verified during upward unidirectional solidification of alloys investigated.

Experiments of vertical unsteady-state directional solidification were carried out in order to permit the influence of copper alloying to Al-Si alloys on the scale of secondary dendritic arm (λ2) to be investigated. The microstructures of Al-nSi-3wt%Cu alloys, with “n” equal to 5.5wt%Si and 9.0wt%Si, were characterized and correlated with solidification thermal parameters: the growth rate (VL), the tip cooling rate (Ṫ) and the local solidification time (tSL). A comparative analysis between the present results and those from the literature related to the secondary dendrite growth during directional solidification of Al-nSi alloys is also conducted. It is shown that the addition of Cu to both Al-nSi alloys decreases λ2, and experimental growth laws relating λ2 to VL and ṪL are proposed for the ternary alloys examined. The experimental scatter of λ2 is also compared with the only theoretical dendritic growth model from the literature for multicomponent alloys, and it is shown that the theoretical predictions overestimate the present experimental results.

No abstract