No abstract

A photovoltaic conversion efficiency of 40.8% at 326 suns concentration is demonstrated in a monolithically grown, triple-junction III–V solar cell structure in which each active junction is composed of an alloy with a different lattice constant chosen to maximize the theoretical efficiency. The semiconductor structure was grown by organometallic vapor phase epitaxy in an inverted configuration with a 1.83 eV Ga.51In.49P top junction lattice-matched to the GaAs substrate, a metamorphic 1.34 eV In.04Ga.96As middle junction, and a metamorphic 0.89 eV In.37Ga.63As bottom junction. The two metamorphic junctions contained approximately 1×105 cm−2 and 2–3×106 cm−2 threading dislocations, respectively.

The self-absorption of radiated photons increases the minority carrier concentration in semiconductor optoelectronic devices such as solar cells. This so-called photon recycling leads to an increase in the external luminescent efficiency, the fraction of internally radiated photons that are able to escape through the front surface. An increased external luminescent efficiency in turn correlates with an increased open-circuit voltage and ultimately conversion efficiency. We develop a detailed ray-optical model that calculates Voc for real, non-idealized solar cells, accounting for isotropic luminescence, parasitic losses, multiple photon reflections within the cell and wavelength-dependent indices of refraction for the layers in the cell. We have fabricated high quality GaAs solar cells, systematically varying the optical properties including the back reflectance, and have demonstrated Voc = 1.101 ± 0.002 V and conversion efficiencies of (27.8 ± 0.8)% under the global solar spectrum. The trends shown by the model are in good agreement with the data.

No abstract

III-N-V semiconductors are promising materials for use in next-generation multijunction solar cells because these materials can be lattice matched to substrates such as GaAs, Ge and Si, with a range of bandgaps that are complementary to those of other III-V semiconductors. Several potentially high-efficiency multijunction photovoltaic device designs using III-N-V materials are discussed. The main roadblock to the development of these solar cell devices is poor minority-carrier transport in the III-N-V materials. The present understanding of the material properties of GaInNAs lattice matched to GaAs and GaNPAs lattice matched to Si is reviewed.

We demonstrate 1.81 eV GaInP solar cells approaching the Shockley-Queisser limit with 20.8% solar conversion efficiency, 8% external radiative efficiency, and 80–90% internal radiative efficiency at one-sun AM1.5 global conditions. Optically enhanced voltage through photon recycling that improves light extraction was achieved using a back metal reflector. This optical enhancement was realized at one-sun currents when the non-radiative Sah-Noyce-Shockley junction recombination current was reduced by placing the junction at the back of the cell in a higher band gap AlGaInP layer. Electroluminescence and dark current-voltage measurements show the separate effects of optical management and non-radiative dark current reduction.

The authors demonstrate a thin, Ge-free III–V semiconductor triple-junction solar cell device structure that achieved 33.8%, 30.6%, and 38.9% efficiencies under the standard 1sun global spectrum, space spectrum, and concentrated direct spectrum at 81suns, respectively. The device consists of 1.8eV Ga0.5In0.5P, 1.4eV GaAs, and 1.0eV In0.3Ga0.7As p-n junctions grown monolithically in an inverted configuration on GaAs substrates by organometallic vapor phase epitaxy. The lattice-mismatched In0.3Ga0.7As junction was grown last on a graded GaxIn1−xP buffer. The substrate was removed after the structure was mounted to a structural “handle.” The current-matched, series-connected junctions produced a total open-circuit voltage over 2.95V at 1sun.