We summarize the problem of measuring an ultrashort laser pulse and describe in detail a technique that completely characterizes a pulse in time: frequency-resolved optical gating. Emphasis is placed on the choice of experimental beam geometry and the implementation of the iterative phase-retrieval algorithm that together yield an accurate measurement of the pulse time-dependent intensity and phase over a wide range of circumstances. We compare several commonly used beam geometries, displaying sample traces for each and showing where each is appropriate, and we give a detailed description of the pulse-retrieval algorithm for each of these cases.

We have measured the ion yields for helium ionized by 120 fs, 614 nm laser pulses for intensities near 10' W/cm. We have found that for these ultrashort pulses the He+ data exhibit a feature which saturates in parallel with the He+ signal indicating that the ionization may proceed nonsequentially. We propose a new mechanism, which can exist only in the tunneling regime, for such nonsequential ionization.

A series of cryogenic, layered deuterium-tritium (DT) implosions have produced, for the first time, fusion energy output twice the peak kinetic energy of the imploding shell. These experiments at the National Ignition Facility utilized high density carbon ablators with a three-shock laser pulse (1.5 MJ in 7.5 ns) to irradiate low gas-filled (0.3  mg/cc of helium) bare depleted uranium hohlraums, resulting in a peak hohlraum radiative temperature ∼290  eV. The imploding shell, composed of the nonablated high density carbon and the DT cryogenic layer, is, thus, driven to velocity on the order of 380  km/s resulting in a peak kinetic energy of ∼21  kJ, which once stagnated produced a total DT neutron yield of 1.9×10^{16} (shot N170827) corresponding to an output fusion energy of 54 kJ. Time dependent low mode asymmetries that limited further progress of implosions have now been controlled, leading to an increased compression of the hot spot. It resulted in hot spot areal density (ρr∼0.3  g/cm^{2}) and stagnation pressure (∼360  Gbar) never before achieved in a laboratory experiment.

We show that frequency-resolved optical gating combined with spectral interferometry yields an extremely sensitive and general method for temporal characterization of nearly arbitrarily weak ultrashort pulses even when the reference pulses is not transform limited. We experimentally demonstrate measurement of the full time-dependent intensity and phase of a train of pulses with an average energy of 42 zeptojoules (42 x 10(-21) J), or less than one photon per pulse.

We use the algorithmic method of generalized projections (GP's) to retrieve the intensity and phase of an ultrashort laser pulse from the experimental trace in frequency-resolved optical gating (FROG). Using simulations, we show that the use of GP's improves significantly the convergence properties of the algorithm over the basic FROG algorithm. In experimental measurements, the GP-based algorithm achieves significantly lower errors than previous algorithms. The use of GP's also permits the inclusion of an arbitrary material response function in the FROG problem.

We demonstrate the first use, to our knowledge, of a compact, diode-pumped, femtosecond fiber laser for third-harmonic generation (THG) microscopy. We discuss the utility of this technique, as well as the technical issues involved in using this compact source, and demonstrate the first use, to our knowledge, of imaging by THG backlighting.

The “High-Foot” platform manipulates the laser pulse-shape coming from the National Ignition Facility laser to create an indirect drive 3-shock implosion that is significantly more robust against instability growth involving the ablator and also modestly reduces implosion convergence ratio. This strategy gives up on theoretical high-gain in an inertial confinement fusion implosion in order to obtain better control of the implosion and bring experimental performance in-line with calculated performance, yet keeps the absolute capsule performance relatively high. In this paper, we will cover the various experimental and theoretical motivations for the high-foot drive as well as cover the experimental results that have come out of the high-foot experimental campaign. At the time of this writing, the high-foot implosion has demonstrated record total deuterium-tritium yields (9.3×1015) with low levels of inferred mix, excellent agreement with implosion simulations, fuel energy gains exceeding unity, and evidence for the “bootstrapping” associated with alpha-particle self-heating.

Obtaining a burning plasma is a critical step towards self-sustaining fusion energy1. A burning plasma is one in which the fusion reactions themselves are the primary source of heating in the plasma, which is necessary to sustain and propagate the burn, enabling high energy gain. After decades of fusion research, here we achieve a burning-plasma state in the laboratory. These experiments were conducted at the US National Ignition Facility, a laser facility delivering up to 1.9 megajoules of energy in pulses with peak powers up to 500 terawatts. We use the lasers to generate X-rays in a radiation cavity to indirectly drive a fuel-containing capsule via the X-ray ablation pressure, which results in the implosion process compressing and heating the fuel via mechanical work. The burning-plasma state was created using a strategy to increase the spatial scale of the capsule2,3 through two different implosion concepts4–7. These experiments show fusion self-heating in excess of the mechanical work injected into the implosions, satisfying several burning-plasma metrics3,8. Additionally, we describe a subset of experiments that appear to have crossed the static self-heating boundary, where fusion heating surpasses the energy losses from radiation and conduction. These results provide an opportunity to study α-particle-dominated plasmas and burning-plasma physics in the laboratory.