We report on a passively mode-locked Yb:YAG thin disk laser oscillator that generates 11.3-microJ pulses without the use of any additional external amplification. A repetition rate of 4 MHz is obtained using a 23.4-m-long multiple-pass cavity that extends the resonator length to a total of 37 m. The nearly transform-limited pulses at 45 W of average output power have a duration of 791 fs with a 1.56-nm-broad spectrum centered at 1030 nm. The laser is operated in a helium atmosphere to eliminate the air nonlinearity inside the resonator that previously limited the pulse energy.

Dual-comb spectroscopy offers the potential for high accuracy combined with fast data acquisition. Applications are often limited, however, by the complexity of optical comb systems. Here we present dual-comb spectroscopy of water vapor using a substantially simplified single-laser system. Very good spectroscopy measurements with fast sampling rates are achieved with a free-running dual-comb mode-locked semiconductor disk laser. The absolute stability of the optical comb modes is characterized both for free-running operation and with simple microwave stabilization. This approach drastically reduces the complexity for dual-comb spectroscopy. Band-gap engineering to tune the center wavelength from the ultraviolet to the mid-infrared could optimize frequency combs for specific gas targets, further enabling dual-comb spectroscopy for a wider range of industrial applications.

No abstract

Lasers generating short pulses -referred to as ultrafast lasers -enable many applications in science and technology. Numerous laboratory experiments have confirmed that ultrafast lasers can significantly increase telecommunication data rates [1], improve computer interconnects, and optically clock microprocessors [2,3]. New applications in metrology [4], supercontinuum generation [5], and life sciences with two-photon microscopy [6] only work with ultrashort pulses but have relied on bulky and complex ultrafast solid-state lasers. Semiconductor lasers are ideally suited for mass production and widespread applications, because they are based on a waferscale technology with a high level of integration. Not surprisingly, the first lasers entering virtually every household were semiconductor lasers in compact disk players. Here we introduce a new concept and make the first feasibility demonstration of a new class of ultrafast semiconductor lasers which are power scalable, support both optical and electrical pumping and allow for wafer-scale fabrication. The laser beam propagates vertically (perpendicularly) through the epitaxial layer structure which has both gain and absorber layers integrated. In contrast to edge-emitters, these lasers have semiconductor layers that can be optimized separately by using different growth parameters and with no regrowth. This is especially important to integrate the gain and absorber layers, which require different quantum confinement. A saturable absorber is required for pulse generation and we optimized its parameters with a single selfassembled InAs quantum dot layer at low growth temperatures. We refer to this class of devices as modelocked integrated external-cavity surface emitting lasers (MIXSEL). Vertical integration supports a diffraction-limited circular output beam, transformlimited pulses, lower timing jitter, and synchronization to an external electronic clock. The pulse repetition rate scales from 1-GHz to 100-GHz by simply changing the laser cavity length. This result holds promise for semiconductor-based high-volume wafer-scale fabrication of compact, ultrafast lasers.

No abstract

Semiconductor saturable absorber mirrors (SESAMs) have become a key element of many ultrafast laser sources, enabling passively modelocked lasers with >100 GHz repetition rate or with >10 microJ pulse energy. Precise knowledge of the nonlinear optical reflectivity is required to optimize the SESAMs for self-starting passive modelocking at record high repetition rates or pulse energies. In this article, we discuss a new method for wide dynamic range nonlinear reflectivity measurements. We achieve a higher accuracy (<0.05%) with a simpler and more cost-efficient measurement scheme compared with previous measurement systems. The method can easily be implemented for arbitrary wavelength regions and fluence ranges.

High-power ultrafast lasers are important for numerous industrial and scientific applications. Current multi-watt systems, however, are based on relatively complex laser concepts, for example using additional intracavity elements for pulse formation. Moving towards a higher level of integration would reduce complexity, packaging, and manufacturing cost, which are important requirements for mass production. Semiconductor lasers are well established for such applications, and optically-pumped vertical external cavity surface emitting lasers (VECSELs) are most promising for higher power applications, generating the highest power in fundamental transverse mode (>20 W) to date. Ultrashort pulses have been demonstrated using passive modelocking with a semiconductor saturable absorber mirror (SESAM), achieving for example 2.1-W average power, sub-100-fs pulse duration, and 50-GHz pulse repetition rate. Previously the integration of both the gain and absorber elements into a single wafer was demonstrated with the MIXSEL (modelocked integrated external-cavity surface emitting laser) but with limited average output power (<200 mW). We have demonstrated the power scaling concept of the MIXSEL using optimized quantum dot saturable absorbers in an antiresonant structure design combined with an improved thermal management by wafer removal and mounting of the 8-µm thick MIXSEL structure directly onto a CVD-diamond heat spreader. The simple straight cavity with only two components has generated 28-ps pulses at 2.5-GHz repetition rate and an average output power of 6.4 W, which is higher than for any other modelocked semiconductor laser.

Semiconductor saturable absorber mirrors (SESAMs) using quantum dot (QD) absorbers exhibit a larger design freedom than standard quantum well absorbers. The additional parameter of the dot density in combination with the field enhancement allows for an independent control of saturation fluence and modulation depth. We present the first detailed study of the effect of QD growth parameters and post growth annealing on the macroscopic optical SESAM parameters, measuring both nonlinear reflectivity and recombination dynamics. We studied a set of self-assembled InAs QD-SESAMs optimized for an operation wavelength around 960 nm with varying dot density and growth temperature. We confirm that the modulation depth is controlled by the dot density. We present design guidelines for QD-SESAMs with low saturation fluence and fast recovery, which are for example important for modelocking of vertical external cavity surface emitting lasers (VECSELs).