A model is developed for the deposition of silicon carbide from the pyrolysis of dichlorodimethylsiane in hydrogen, in a tubular reactor at temperatures from 700° to 1100°C and 1.013 × 105 Pa (1 atm) pressure. Concentration of dichlorodimethylsilane varied from 2 to 8 vol%. Gas chromatography was used to determine the volatile products of reaction, and gravimetric analysis was used to determine the total silicon and silicon carbide deposition on the tube. The model developed based on the experimental data that assumes the following chemical reactions:
The rate constants derived from a nonlinear regression analysis are reported.
A chemical analysis of the pyrolysis gases and solids formed during the deposition of silicon carbide from the decomposition of dichlorodimethylsilane in argon and hydrogen is reported. Depositions were performed at 1 atm pressure, temperatures from 700" to 11OO"C, and a mean residence time of approximately 1 min. The chemical analysis shows that, under reactor conditions, the gases formed were mainly methane, hydrogen, silicon tetrachloride, trichlorosilane, and trichloromethylsilane. The presence of hydrogen chloride was not examined. The use of hydrogen, as a carrier gas, decreased the trichloromethylsilane and solid aerosol (smoke) in the reaction products, compared to that present in the argon system, and increased methane, trichlorosilane, and silicon production. Primarily, silicon and silicon carbide were deposited when hydrogen was used as the carrier gas. When argon was used, a complex mixture of silicon carbide and organosilicon compounds was formed. It is hypothesized that, when hydrogen was used as the carrier gas, silicon carbide formed from chlorosilanes and methane, which were products from the decomposition of dichlorodimethylsilane. These products subsequently reacted to form silicon, which then reacted with methane to form silicon carbide. In argon, however, it is hypothesized that silicon carbide can be formed in two ways: (1) from the pyrolysis of solid organosilicon compounds which are products from the pyrolysis of dichlorodimethylsilane in argon and (2) as the reduction of dichlorodimethylsilane to chlorosilanes and methane, caused by the hydrogen produced from the pyrolysis of dichlorodimethylsilane in argon.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.