Pesticide emissions to air have been shown to correlate with compound vapor pressure values taken from the published literature. In the present study, emissions correlations based on vapor pressures derived from chemical property estimation methods are formulated and compared with correlations based on the literature data. Comparison was made by using the two types of correlations to estimate emission rates for five herbicides, a fungicide, and an insecticide, for which field-measured emission rates from treated soil, foliage, and water were available. In addition, downwind concentrations were estimated for two herbicides, three fungicides, four insecticides, and two fumigants, for which concentration measurements had been made near treated sources. The comparison results demonstrated that correlations based on vapor pressures derived from chemical property estimation methods were essentially equivalent to correlations based on literature data. The estimation approach for vapor pressures is a viable alternative to the inherently more subjective process of selecting literature values.

Carbofuran (2,3-dihydro-2,2-dimethyl-7-benzofuranyl-N-methylcarbamate), a broad spectrum N-methyl carbamate insecticide, and its metabolite, 3-hydroxycarbofuran, exert their toxicity by reversibly inhibiting acetylcholinesterase (AChE). To characterize AChE inhibition from carbofuran exposure, a physiologically based pharmacokinetic/pharmacodynamic (PBPK/PD) model was developed in the Exposure-Related Dose Estimating Model (ERDEM) platform for the Sprague-Dawley (SD) rat. Experimental estimates of physiological, biochemical, and physicochemical model parameters were obtained or based on data from the open literature. The PBPK/PD model structure included carbofuran metabolism in the liver to 16 known metabolites, enterohepatic circulation of glucuronic acid conjugates, and excretion in urine and feces. Bolus doses by ingestion of 50 microg/kg and 0.5 mg/kg carbofuran were simulated for the blood and brain AChE activity. The carbofuran ERDEM simulated a half-life of 5.2 h for urinary clearance, and the experimental AChE activity data were reproduced for the blood and brain. Thirty model parameters were found influential to the model outputs and were chosen for perturbation in Monte Carlo simulations to evaluate the impact of their variability on the model predictions. Results of the simulation runs indicated that the minimum AChE activity in the blood ranged from 29.3 to 79.0% (as 5th and 95th percentiles) of the control level with a mean of 55.9% (standard deviation = 15.1%) compared to an experimental value of 63%. The constructed PBPK/PD model for carbofuran in the SD rat provides a foundation for extrapolating to a human model that can be used for future risk assessment.

In this review we have examined the status of parameters required by pyrethroid QSAR-PBPK/PD models for assessing health risks. In lieu of the chemical,biological, biochemical, and toxicological information developed on the pyrethroids since 1968, the finding of suitable parameters for QSAR and PBPK/PD model development was a monumental task. The most useful information obtained came from rat toxicokinetic studies (i.e., absorption, distribution, and excretion), metabolism studies with 14C-cyclopropane- and alcohol-labeled pyrethroids, the use of known chiral isomers in the metabolism studies and their relation to commercial products. In this review we identify the individual chiralisomers that have been used in published studies and the chiral HPLC columns available for separating them. Chiral HPLC columns are necessary for isomer identification and for developing kinetic values (Vm,, and Kin) for pyrethroid hydroxylation. Early investigators synthesized analytical standards for key pyrethroid metabolites, and these were used to confirm the identity of urinary etabolites, by using TLC. These analytical standards no longer exist, and muste resynthesized if further studies on the kinetics of the metabolism of pyrethroids are to be undertaken.In an attempt to circumvent the availability of analytical standards, several CYP450 studies were carried out using the substrate depletion method. This approach does not provide information on the products formed downstream, and may be of limited use in developing human environmental exposure PBPK/PD models that require extensive urinary metabolite data. Hydrolytic standards (i.e., alcohols and acids) were available to investigators who studied the carboxylesterase-catalyzed hydrolysis of several pyrethroid insecticides. The data generated in these studies are suitable for use in developing human exposure PBPK/PD models.Tissue:blood partition coefficients were developed for the parent pyrethroids and their metabolites, by using a published mechanistic model introduced by Poulin and Thiele (2002a; b) and log DpH 7.4 values. The estimated coefficients, especially those of adipose tissue, were too high and had to be corrected by using a procedure in which the proportion of parent or metabolite residues that are unbound to plasma albumin is considered, as described in the GastroPlus model (Simulations Plus, Inc.,Lancaster, CA). The literature suggested that Km values be adjusted by multiplying Km by the substrate (decimal amount) that is unbound to microsomal or CYPprotein. Mirfazaelian et al. (2006) used flow- and diffusion-limited compartments in their deltamethrin model. The addition of permeability areas (PA) having diffusion limits, such as the fat and slowly perfused compartments, enabled the investigators to bring model predictions in line with in vivo data.There appears to be large differences in the manner and rate of absorption of the pyrethroids from the gastrointestinal tract, implying that GI advanced compartmental transit models (ACAT) need to be included in PBPK mo...

Developing physiologically-based pharmacokinetic (PBPK) models for chemicals can be resource-intensive, as neither chemical-specific parameters nor in vivo pharmacokinetic data are easily available for model construction. Previously developed, well-parameterized, and thoroughly-vetted models can be a great resource for the construction of models pertaining to new chemicals. A PBPK knowledgebase was compiled and developed from existing PBPK-related articles and used to develop new models. From 2,039 PBPK-related articles published between 1977 and 2013, 307 unique chemicals were identified for use as the basis of our knowledgebase. Keywords related to species, gender, developmental stages, and organs were analyzed from the articles within the PBPK knowledgebase. A correlation matrix of the 307 chemicals in the PBPK knowledgebase was calculated based on pharmacokinetic-relevant molecular descriptors. Chemicals in the PBPK knowledgebase were ranked based on their correlation toward ethylbenzene and gefitinib. Next, multiple chemicals were selected to represent exact matches, close analogues, or non-analogues of the target case study chemicals. Parameters, equations, or experimental data relevant to existing models for these chemicals and their analogues were used to construct new models, and model predictions were compared to observed values. This compiled knowledgebase provides a chemical structure-based approach for identifying PBPK models relevant to other chemical entities. Using suitable correlation metrics, we demonstrated that models of chemical analogues in the PBPK knowledgebase can guide the construction of PBPK models for other chemicals.

Biomonitoring is the process by which biomarkers are measured in human tissues and specimens to evaluate exposures. Given the growing number of population-based biomonitoring surveys, there is now an escalated interest in using biomarker data to reconstruct exposures for supporting risk assessment and risk management. While detection of biomarkers is de facto evidence of exposure and absorption, biomarker data cannot be used to reconstruct exposure unless other information is available to establish the external exposure-biomarker concentration relationship. In this review, the process of using biomarker data and other information to reconstruct human exposures is examined. Information that is essential to the exposure reconstruction process includes (1) the type of biomarker based on its origin (e.g., endogenous vs. exogenous), (2) the purpose/design of the biomonitoring study (e.g., occupational monitoring), (3) exposure information (including product/chemical use scenarios and reasons for expected contact, the physicochemical properties of the chemical and nature of the residues, and likely exposure scenarios), and (4) an understanding of the biological system and mechanisms of clearance. This review also presents the use of exposure modeling, pharmacokinetic modeling, and molecular modeling to assist in integrating these various types of information.

No abstract

Chemical inhibitors were used as probes of mitochondrial ATPase to determine the site of action of DDT on oligomycin-sensitive mitochondrial ATPase (0s-ATPase) using whole mitochondria isolated from red coxal muscle of the American cockroach. Several plotting procedures were employed to delineate the form of inhibition. Relative potency and joint action were used to detect similar action, synergism, and antagonism between DDT and the inhibitory probes DCCD, Nbf-CI, and oligomycin. DDT demonstrated not (strictly) competitive kinetics and may be acting as an uncornpetitive inhibitor. DDT and DCCD produced similar additive action. At limiting concentrations of DCCD, inhibition was reduced in the presence of DDT. Effects shown by oligornycin were not altered by DDT. DDT enhanced the effects of Nbf-CI.These interactions, together with the demonstration of not (strictly) competitive kinetics, indicate that DDT may be acting on the membrane sector as an allosteric modifier.

No abstract