Atmospheric aerosols of four aerodynamic size ranges were collected using high volume cascade impactors in an extremely busy roadway tunnel in Lisbon (Portugal). Dust deposited on the tunnel walls and guardrails was also collected. Average particle mass concentrations in the tunnel atmosphere were more than 30 times higher than in the outside urban background air, revealing its origins almost exclusively from fresh vehicle emissions. Most of the aerosol mass was concentrated in submicrometer fractions (65%), and polycyclic aromatic hydrocarbons (PAH) were even more concentrated in the finer particles with an average of 84% of total PAH present in sizes smaller than 0.49 mu m. The most abundant PAH were methylated phenanthrenes, fluoranthene and pyrene. About 46% of the total PAH mass was attributed to lower molecular weight compounds (two and three rings), suggesting a strong influence of diesel vehicle emissions on the production of local particulate PAH. The application of diagnostic ratios confirmed the relevance of this source of PAH in the tunnel ambient air. Deposited dust presented PAH profiles similar to the coarser aerosol size range, in agreement with the predominant origin of coarser aerosol particles from soil dust resuspension and vehicle wear products.

An atmospheric aerosol study was performed in 2008 inside an urban road tunnel, in Lisbon, Portugal. Using a high volume impactor, the aerosol was collected into four size fractions (PM0.5, PM0.5-1, PM1-2.5 and PM2.5-10) and analysed for particle mass (PM), organic and elemental carbon (OC and EC), polycyclic aromatic hydrocarbons (PAH), soluble inorganic ions and elemental composition. Three main groups of compounds were discriminated in the tunnel aerosol: carbonaceous, soil component and vehicle mechanical wear. Measurements indicate that Cu can be a good tracer for wear emissions of road traffic. Cu levels correlate strongly with Fe, Mn, Sn and Cr, showing a highly linear constant ratio in all size ranges, suggesting a unique origin through sizes. Ratios of Cu with other elements can be used to source apportion the trace elements present in urban atmospheres, mainly on what concerns coarse aerosol particles. (C)

No abstract

No abstract

No abstract

Understanding air pollution in urban areas is crucial to identify mitigation actions that may improve air quality and, consequently, minimize human exposure to air pollutants and their impact. This study aimed to assess the temporal evolution of the air quality in the city of Setúbal (Portugal) during a time period of 10 years (2003–2012), by evaluating seasonal trends of air pollutants (PM10, PM2.5, O3, NO, NO2 and NOx) measured in nine monitoring stations. In order to identify emission sources of particulate matter, PM2.5 and PM2.5–10 were characterized in two different areas (urban traffic and industrial) in winter and summer and, afterwards, source apportionment was performed by means of Positive Matrix Factorization. Overall, the air quality has been improving over the years with a decreasing trend of air pollutant concentration, with the exception of O3. Despite this improvement, levels of PM10, O3 and nitrogen oxides still do not fully comply with the requirements of European legislation, as well as with the guideline values of the World Health Organization (WHO). The main anthropogenic sources contributing to local PM levels were traffic, industry and wood burning, which should be addressed by specific mitigation measures in order to minimize their impact on the local air quality.

There is an intense and continuous growth of the world population living in cities. This increase in population means an increase in car traffic, an increase in new constructions and an increase in the production of waste that translates into an intensive use of land, particularly in terms of soil contaminants. Among other environmental contaminants, toxic metals, such as lead (Pb), cadmium (Cd), nickel (Ni) and chromium (Cr) represent a public health problem. In this study the content of toxic metals in Lisbon’s (Portugal) soils was determined. The study was conducted over approximately a decade in six city locations, with a total of about 700 samples. Each site has different urban characteristics: traffic zone, residential area, urban park and mixed areas. The study allowed to verify the heterogeneity of metal content values in the city soils and their dependence on local traffic. Metal contents were determined by graphite furnace atomic absorption spectroscopy (GFAAS). For each site the geo-accumulation index, pollution factor, degree of contamination, pollution load index and ecological risk factor were calculated. The mean concentrations of Cd, Cr, Ni and Pb in soils were 0.463, 44.0, 46.6 and 5.73 mg/kg of dry soil, respectively. In the last year of the study the values were 0.417, 51.5, 62.4 and 8.49 mg/kg of dry soil, respectively. Cd and Ni exceeded the typical content values of these metals in the earth’s crust, indicating their anthropogenic origin. The correlation analysis revealed a significant correlation between Cr and Ni, Cd and Ni and Cd and Pb contents in the city soils. Regarding the results obtained in this long monitoring campaign, Lisbon’s soils can be considered as having low levels of pollution by these metals.

No abstract