The binder is composed of nine parts (by mass) styrene copolymer and one part wax. Both ingredieuts are marketed under brand names and are available as 10 p.m powders, which can be conveniently blended in bulk. Exceptionally robust briquettes contahing 10% binder have been made from a great variety of sample types, including metal powders, ion exchange resins, coal, charcoal, graphite, ash, vegetable matter and geological materials. Normally the sample and binder are milled together in a swing miU and milling behaviour is not adversely allected. The briquettes are not affected by vacuum, radiation or age. Erratic milling efficiency of the six-vessel swing mills used and modifications to overcome the problem are described. For the most satisfactory ejection of a briquette, the cylinder wall of the die should taper slightly outwards near the ejecting end. A pressure of at least 0.04MPa is recommended to ensure maximum x-ray fluorescence intensity, but higher pressures improve briquette strength. In the above-mentioned laboratory 0.23 MPa is normally used. The time the briquette is held under full load is not important. The simplicity of the method makes it possible to mill and press more than 1000 briquettes per day. Binder cost is approximately 3 cents per gram.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.