An experimental investigation was conducted on two lengths of Roman lead water pipe excavated near Corbridge, Northumberland, England. The pipes date from approximately AD 80. One length of pipe contained a sleeve joint. The pipes were linked to a pump system using 3D-printed connectors, and the hydraulic head loss along the pipe was measured. The pipe without a joint was used to determine a value for the wall roughness height, fitting the results to the Darcy-Weisbach equation. The wall roughness height obtained was assumed to apply to the pipe with the joint, and the additional head loss observed was then assumed to be due to the joint, allowing determination of a local loss coefficient. The pipes have a sinter encrustation, indicating that they had typically flowed partially full. Using this as an indication of water depth and deriving topographical information from the excavation report, the likely flow the pipes carried during their operational life was estimated. It was concluded that the pipe wall roughness coefficient ks was 0.9 mm, the joint local loss coefficient was 1.159, and that during operation the pipe probably carried around 17 litres/minute.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.