We report the synthesis and characterization of a fluorescent probe (Hypo-SiF) designed for the detection of hypochlorous acid (HOCl) using a silicon analogue of fluorescein (SiF). The probe is regulated in an "off-on" fashion by a highly selective thioether spirocyclic nonfluorescent structure that opens to form a mixture of fluorescent products in the presence of HOCl. Over a range of pH values, the probe reacts with a stoichiometric amount of HOCl, resulting in a mixture of two pH-dependent fluorescent species, a SiF disulfide product and a SiF sulfonate product. The unique colorimetric properties of the individual SiF fluorophores were utilized to perform simultaneous detection of HOCl and pH. When an excess of HOCl is present, the SiF fluorophores become chlorinated, via an intermediate halohydrin, resulting in a more pH independent and red-shifted fluorophore.
A NIR II emissive dye was synthesized by the C–H bond functionalization of 1-methyl-2-phenylindolizine with 3,6-dibromoxanthene. The rhodindolizine (RhIndz) spirolactone product was nonfluorescent; however, upon opening of the lactone ring by the formation of the ethyl ester derivative, the fluorophore absorbs at 920 nm and emits at 1092 nm, which are both in the NIR II region. In addition, 4-cyanophenyl- (CNRhIndz) and 4-methoxyphenyl-substituted rhodindolizine (MeORhIndz) could also be prepared by the C–H activation reaction.
A synthetic K vitamin analogue, 2-(2-mercaptothenol)-3-methyl-1,4-naphthoquinone or Cpd 5, was previously found to be a potent inhibitor of cell growth [Nishikawa et al., (1995) J. Biol. Chem. 270, 28304-28310]. The mechanisms of cell growth were hypothesized to include the inactivation of cellular protein tyrosine phosphatases, especially the Cdc25 family [Tamura et al. (2000) Cancer Res. 60, 1317-1325]. In this study, we synthesized PD 49, a new biotin containing Cpd 5 derivative, to search for evidence of direct interaction of these arylating analogues with Cdc25A, Cdc25B, and Cdc25C phosphatases. PD 49 was shown to directly bind to GST-Cdc25A, GST-Cdc25B, their catalytic fragments, and GST-Cdc25C. The binding could be competed with excess glutathione or Cpd 5, and a cysteine-to-serine mutation of the catalytic cysteine abolished binding. This was consistent with an involvement in binding of cysteine in the catalytic domain. This interaction between PD 49 and Cdc25 also occurred in lysates of treated cells. PD 49 also bound to protein phosphatases other than Cdc25. We found that the new analogue also inhibited Hep3B human hepatoma cell growth. This growth inhibition involved ERK1/2 phosphorylation and was inhibited by a MEK antagonist. The results demonstrate a direct interaction and binding between this growth-inhibiting K vitamin derivative with both purified as well as with cellular Cdc25A, Cdc25B, and Cdc25C.
Poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is a popular hole transport material in perovskite solar cells (PSCs). However, the devices with PEDOT:PSS exhibit large open‐circuit voltage (Voc) loss and low efficiency, which is attributed to mismatched energy level alignment and the poor interface of PEDOT:PSS and perovskite. Here, three polymer analogues to polyaniline (PANI), PANI–carbazole (P1), PANI–phenoxazine (P2), and PANI–phenothiazine (P3) are designed with different energy levels to modify the interface between PEDOT:PSS and the perovskite layer and improve the device performance. The effects of the polymers on the device performance are demonstrated by evaluating the work function adjustment, perovskite growth control, and interface modification in MAPbI3‐based PSCs. Low bandgap Sn–Pb‐based PSCs are also fabricated to confirm the effects of the polymers. Three effects are evaluated through the comparison study of PEDOT:PSS‐based organic solar cells and MAPbI3 PSCs based on the PEDOT:PSS modified by P1, P2, and P3. The order of contribution for the three effects is work function adjustment > surface modification > perovskite growth control. MAPbI3 PSCs modified with P2 exhibit a high Voc of 1.13 V and a high‐power conversion efficiency of 21.06%. This work provides the fundamental understanding of the interface passivation effects for PEDOT:PSS‐based optoelectronic devices.
A series of pH dependent rhodamine analogs possessing an anilino-methyl moiety was developed and shown to exhibit a unique photophysical response to pH. These Anilinomethylrhodamines (AnMR) maintain a colorless, non-fluorescent spiro-cyclic structure at high pH. The spiro-cyclic structures open in mildly acidic conditions and are weakly fluorescent; however at very low pH, the fluorescence is greatly enhanced. The equilibrium constants of these processes show a linear response to substituent effects, which was demonstrated by the Hammett equation.
Supercapacitor energy storage devices are well suited to meet the rigorous demands of future portable consumer electronics (PCEs) due to their high energy and power densities (i.e., longer battery-life and rapid charging, respectively) and superior operational lifetimes (10 times greater than lithium-ion batteries). To date, research efforts have been narrowly focused on improving the specific capacitance of these materials; however, emerging technologies are increasingly demanding competitive performance with regards to other criteria, including scalability of fabrication and electrochemical stability. In this regard, we developed a polyaniline (PANI) derivative that contains a carbazole unit copolymerized with 2,5-dimethyl-p-phenylenediamine (Cbz-PANI-1) and determined its optoelectronic properties, electrical conductivity, processability, and electrochemical stability. Importantly, the polymer exhibits good solubility in various solvents, which enables the use of scalable spray-coating and drop-casting methods to fabricate electrodes. Cbz-PANI-1 was used to fabricate electrodes for supercapacitor devices that exhibits a maximum areal capacitance of 64.8 mF cm −2 and specific capacitance of 319 F g −1 at a current density of 0.2 mA cm −2 . Moreover, the electrode demonstrates excellent cyclic stability (≈ 83% of capacitance retention) over 1000 CV cycles. Additionally, we demonstrate the charge storage performance of Cbz-PANI-1 in a symmetrical supercapacitor device, which also exhibits excellent cyclic stability (≈ 91% of capacitance retention) over 1000 charge−discharge cycles.
A series of fluorescent pH probes based on the spiro-cyclic rhodamine core, aminomethylrhodamines (AMR), was synthesized and the effect of cycloalkane ring size on the acid/base properties of the AMR system was explored. The study involved a series of rhodamine 6G (cAMR6G) and rhodamine B (cAMR) pH probes with cycloalkane ring sizes from C-3 to C-6 on the spiro-cyclic amino group. It is known that the pKa value of cycloalkylamines can be tuned by the different ring sizes in accordance with the Baeyer ring strain theory. Smaller ring amines have lower pKa value, i.e. they're less basic, such that the relative order in cycloalkylamine basicity is: cyclohexyl>cyclopentyl>cyclobutyl>cyclopropyl. Herein, it was found that the pKa values of the cAMR and cAMR6G systems can also be predicted by Baeyer ring strain theory. The pKa values for the cAMR6G series were shown to be higher than the cAMR series by a value of approximately 1.
Polyaniline (PANI) is one of the most accessible conducting polymers and is known for its environmental stability in its partially oxidized conductive state. However, it is difficult to process and undergoes electrochemical degradation between its partially and fully oxidized states. While there have been several approaches to address PANI’s processability, little has been done to address its electrochemical instability. We have prepared two polyaniline derivatives that contain a phenoxazine unit copolymerized with 2,5-dimethyl-p-phenylenediamine (P1) and p-phenylenediamine (P2) and determined their optoelectronic properties, processability, morphology, and electrochemical stability. Camphor sulfonic acid (CSA) doped polymers were dissolved in organic solvents and cast into films, which were analyzed by absorption spectroscopy, cyclic voltammetry, and conductivity measurements. Importantly, the films exhibit outstanding electrochemical stability over multiple redox and spectroelectrochemical cycles and conductivity in the high semiconductive regime (0.1 to 1 S/cm) when exposed to m-cresol vapors. Additionally, P1 exists as aggregates in the absence of m-cresol vapors, but as highly conductive sheet-like structures in the presence of m-cresol as shown by SEM, TEM, and AFM images. These results show that P1 and P2 would be outstanding candidates for applications that required stable redox conductive polymers.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.