The organ geometry showed good correspondence with anatomical references. The methodology developed can be generally applied to other anatomical or geometrical phantoms for molecular imaging.
BackgroundThe use of selective internal radiation therapy (SIRT) is rapidly increasing, and the need for quantification and dosimetry is becoming more widespread to facilitate treatment planning and verification. The aim of this project was to develop an anthropomorphic phantom that can be used as a validation tool for post-SIRT imaging and its application to dosimetry.MethodThe phantom design was based on anatomical data obtained from a T1-weighted volume-interpolated breath-hold examination (VIBE) on a Siemens Aera 1.5 T MRI scanner. The liver, lungs and abdominal trunk were segmented using the Hermes image processing workstation. Organ volumes were then uploaded to the Delft Visualization and Image processing Development Environment for smoothing and surface rendering. Triangular meshes defining the iso-surfaces were saved as stereo lithography (STL) files and imported into the Autodesk® Meshmixer software. Organ volumes were subtracted from the abdomen and a removable base designed to allow access to the liver cavity. Connection points for placing lesion inserts and filling holes were also included.The phantom was manufactured using a Stratasys Connex3 PolyJet 3D printer. The printer uses stereolithography technology combined with ink jet printing. Print material is a solid acrylic plastic, with similar properties to polymethylmethacrylate (PMMA).ResultsMeasured Hounsfield units and calculated attenuation coefficients of the material were shown to also be similar to PMMA. Total print time for the phantom was approximately 5 days. Initial scans of the phantom have been performed with Y-90 bremsstrahlung SPECT/CT, Y-90 PET/CT and Tc-99m SPECT/CT. The CT component of these images compared well with the original anatomical reference, and measurements of volume agreed to within 9 %. Quantitative analysis of the phantom was performed using all three imaging techniques. Lesion and normal liver absorbed doses were calculated from the quantitative images in three dimensions using the local deposition method.Conclusions3D printing is a flexible and cost-efficient technology for manufacture of anthropomorphic phantom. Application of such phantoms will enable quantitative imaging and dosimetry methodologies to be evaluated, which with optimisation could help improve outcome for patients.
Accurate measurements of whole-body activity retention of patients during radionuclide therapy are essential for two reasons: First, they enable the correct radiation protection advice to be given and second, they permit the accurate determination of the absorbed whole-body dose delivered during therapy. This, in turn, allows treatment planning to be carried out for future radionuclide therapy on an individual patient basis, and also enables the investigation of the potential correlation of absorbed dose with treatment outcome in groups of patients. There are significant difficulties associated with taking whole-body retention measurements of children, especially when they are very young and/or unwell. It is essential to carry these out in a way that minimises disturbance to the child while still providing good quality data. To accomplish this, we have aimed to optimize the following aspects of the procedure: (i) the environment in which the measurements are performed; (ii) the equipment--which includes the recent installation of a specially designed whole-body activity monitoring system for these patients; and (iii) the methodology for calculating the absorbed dose. These improvements have allowed large numbers of accurate and reproducible whole-body measurements to be collected following patient administrations. This has enabled the identification of more phases of radionuclide excretion during therapy than had previously been observed. These data have been used for radiation protection advice and treatment planning. Two (2) patients were given multiple radionuclide treatments and we were able to compare the whole-body doses delivered.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.