The boron phosphide (BP) semiconductor has many remarkable features, including high thermal neutron capture cross section of the 10 B isotope, making it attractive for neutron detection applications. Effective and efficient neutron detection require BP to also have high crystal quality with optimum electrical properties. Here, we present the heteroepitaxial growth of high quality BP films on a superior aluminum nitride(0001)/sapphire substrate by chemical vapor deposition. The effect of process variables on crystalline and morphological properties of BP was examined in detail. BP deposited at high temperatures and high reactant flow rate ratios produced films with increased grain size and improved crystalline orientation. Narrower full width at half-maximum values of BP Raman peaks (6.1 cm −1 ) and ω rocking curves (352 arcsec) compared to values in the literature confirm the high crystalline quality of produced films. The films were n-type with the highest electron mobility of 37.8 cm 2 /V·s and lowest carrier concentration of 3.15 × 10 18 cm −3 . Rotational twinning in BP due to degenerate epitaxy caused by 3-fold BP(111) on 6-fold AlN(0001) was confirmed by synchrotron white beam X-ray topography. This preliminary study showed that AlN is an excellent substrate for growing high quality BP epitaxial films with promising potential for further enhancement of BP properties.
a b s t r a c tEpitaxial growth of boron phosphide (BP) films on 4H-and 6H-SiC(0001) substrates with on-and off-axis orientations was investigated in this study. The films were prepared by chemical vapor deposition using phosphine and diborane as reactants over a temperature range of 1000 o Ce1200 C. The effects of growth parameters such as temperature, reactant flow rates, substrate type, and crystallographic orientation on BP film properties were studied in detail. The epitaxial relationship between BP film and 4H-and 6H-SiC substrate was ð111ÞBP < 112 > BP jj ð0001ÞSiC < 1100 > SiC. Film quality, determined by preferred crystalline orientation and grain size, improved with temperature and PH 3 /B 2 H 6 flow ratio, as indicated by scanning electron microscopy, x-ray diffraction, atomic force microscopy and Raman spectroscopy. In addition, smoother films were obtained when the diborane flow rate was reduced. Rotational twinning in BP films was absent on 4H-SiC(0001) tilted 4 towards ½1100, but was confirmed on both 4H-SiC(0001) tilted 4 towards ½1210, and on-axis 6H-SiC(0001) substrates by synchrotron white beam x-ray topography technique.
Hexagonal boron nitride (hBN) is an emerging material for the exploration of new physics in two-dimensional (2D) systems that are complementary to graphene. Nanotubes with a diameter ($60 nm) that is much larger than the exciton binding energy in hBN have been synthesized and utilized to probe the fundamental optical transitions and the temperature dependence of the energy bandgap of the corresponding 2D hBN sheets. An excitonic transition at 5.901 eV and its longitudinal optical phonon replica at 5.735 eV were observed. The excitonic emission line is blue shifted by about 130 meV with respect to that in hBN bulk crystals due to the effects of reduced dimensionality. The temperature evolution of the excitonic emission line measured from 300 to 800 K revealed that the temperature coefficient of the energy bandgap of hBN nanotubes with large diameters (or equivalently hBN sheets) is about 0.43 meV/ 0 K, which is a factor of about 5 times smaller than the theoretically predicted value for the transitions between the p and p* bands in hBN bulk crystals and 6 times smaller than the measured value in AlN epilayers with a comparable energy bandgap. The observed weaker temperature dependence of the bandgap than those in 3D hBN and AlN is a consequence of the effects of reduced dimensionality in layer-structured hBN.
The icosahedral boride B12P2 has been reported to exhibit "self-healing" properties, after transmission electron microscopy recordings of sample surfaces, that were exposed to highly energetic particle beams, revealed little to no damage. In this work, employing calculations from first-principles within the density functional theory (DFT) framework, the structural characteristics of boron interstitial and vacancy defects in B12P2 are investigated. Using nudged elastic band simulations, the diffusion properties of interstitial and vacancy defects and their combination, in the form of Frenkel defect pairs, are studied. We find that boron icosahedra maintain their structural integrity even when in a degraded state in the presence of a vacancy or interstitial defect and that the diffusion activation energy for the recombination of an interstitial vacany pair, can be as low as 3 meV, in line with the previously reported observation of "self-healing".
Icosahedral boron phosphide (B 12 P 2) is a wide bandgap semiconductor (3.35 eV) that has been reported to "selfheal" from high-energy electron bombardment, making it attractive for potential use in radioisotope batteries, radiation detection, or in electronics in high radiation environments. This study focused on improving B 12 P 2 hetero-epitaxial films by growing on 4H-SiC substrates over the temperature range of 1250-1450 • C using B 2 H 6 and PH 3 precursors in a H 2 carrier gas. XRD scans and Laue transmission photographs revealed that the epitaxial relationship was (0001) 1120 B 12 P 2 (0001) 1120 4H-SiC. The film morphology and crystallinity were investigated as a function of growth temperature and growth time. At 1250 • C, films tended to form rough, polycrystalline layers, but at 1300 and 1350 • C, films were continuous and comparatively smooth (R RMS ≤ 7 nm). At 1400 or 1450 • C, the films grew in islands that coalesced as the films became thicker. Using XRD rocking curves to evaluate the crystal quality, 1300 • C was the optimum growth temperature tested. At 1300 • C, the rocking curve FWHM decreased with increasing film thickness from 1494 arcsec for a 1.1 μm thick film to 954 arcsec for a 2.7 μm thick film, suggesting a reduction in defects with thickness.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.