The purpose of the present work was to prepare polypropylene (PP) matrix composited filled with chemically treated pistachio shell particles (PTx), and evaluate their effect on the composites’ thermal properties. PP-PTx composites were formulated in different PTx content (from 2 to 10 phr) in a mixing chamber, using the melt-mixing process. The PTx were chemically treated using a NaOH solution and infrared spectroscopy (FTIR). According to thermogravimetric analysis (TGA), the treatment of pistachio shell particles resulted in the remotion of lignin and hemicellulose. The thermal stability was evaluated by means of TGA, where the presence of PTx in composites showed a positive effect compared with PP pristine. Thermal properties such as crystallization temperature (Tc), crystallization enthalpy (∆Hc), melting temperature (Tm) and crystallinity were determinate by means differential scanning calorimetry (DSC); these results suggest that the PTx had a nucleation effect on the PP matrix, increasing their crystallinity. Dynamic mechanical analysis (DMA) showed that stiffness of the composites increase compared with that PP pristine, as well as the storage modulus, and the best results were found at a PTx concentration of 4 phr. At higher concentrations, the positive effect decreased; however, they were better than the reference PP.

No abstract

No abstract

Currently, acne in adolescents and adults is caused by an infection in follicles caused by hormonal changes, stress, water pollution, air, and earth; the last one comes into contact with the skin through the hands of patients. This project presents the incorporation of acetylsalicylic acid (ASA) to the hydroxyethylcellulose/polyacrylamide gel (HEC/PAAm) in the synthesis of gel or by its swelling.The results show us that the incorporation of ASA is possible by both methods; first, the incorporation by synthesis of degradation of the gel is more visible. The infrared spectroscopic analysis shows the functional groups of gel and ASA, 2921 and 2863 cm −1 , whose assignments correspond to CH 3 and CH 2 groups, which are part of both the polymer and the ASA molecule, which confirms the interaction between the two groups. The microscopy photographs (SEM) show on the surface the drug in irregular whitish orthorhombic forms due to swelling; arborescent structures are observed in the case of the incorporation of the ASA drug by synthesis. Swelling kinetics has a Fickian form. The Higuchi model conforms to the release of ASA because the level of confidence is 90%. This gel was allowed to release 0.35 mg/hour, thus allowing the patient to have a continuous form of the release, in the affected area in a short period of time.