Due to concerns about the unsustainability and predictable shortage of fossil feedstocks, research efforts are currently being made to develop new processes for production of commodities using alternative feedstocks. 3-Hydroxypropionic acid (CAS 503-66-2) was recognised by the US Department of Energy as one of the most promising value-added chemicals that can be obtained from biomass. This article aims at reviewing the various strategies implemented thus far for 3-hydroxypropionic acid bioproduction. Special attention is given here to process engineering issues. The variety of possible metabolic pathways is also described in order to highlight how process design can be guided by their understanding. The most recent advances are described here in order to draw up a panorama of microbial 3-hydroxypropionic acid production: best performances to date, remaining hurdles and foreseeable developments. Important milestones have been achieved, and process metrics are getting closer to commercial relevance. New strategies are continuously being developed that involve new microbial strains, new technologies, or new carbon sources in order to overcome the various hurdles inherent to the different microbial routes.
The present work was focused on elucidating changes in the model yeast Saccharomyces cerevisiae (cell composition, ultrastructure) after exposure to antimicrobial plasma-mediated nanocomposite films. In order to achieve this, a nanosilver-containing coating was deposited onto stainless steel using radiofrequency HMDSO plasma deposition, combined with simultaneous silver sputtering. X-ray photoelectron spectroscopy (XPS) confirmed the presence of silver nanoparticles embedded in an organosilicon matrix. In addition, scanning electron microscopy (SEM) demonstrated the nanoparticle-based morphology of the deposited layer. The antifungal properties towards S. cerevisiae were established, since a 1.4 log reduction in viable counts was observed after a 24-h adhesion compared to control conditions with the matrix alone. Differences in cell composition after exposure to the nanosilver was assessed for the protein region using, for the first time, synchrotron Fourier-transform infrared (FTIR) microspectroscopy of single S. cerevisiae cells, through in situ mapping with sub-cellular spatial resolution. IR spectrum of yeast cells recovered after a 24-h adhesion to the nanosilver-containing coating revealed a significant downshift (20 cm(-1)) of the amide I peak at 1655 cm(-1), compared to freshly harvested cells. This lower band position, corresponding to a loss in alpha-helix structures, is indicative of the disordered secondary structures of proteins, due to the transition between active and inactive conformations under nanosilver-induced stress conditions. No significant effect on the nucleic acid region was detected. The inhibitory action of silver was targeted against both cell wall and intracellular proteins such as enzymes. Transmission electron microscopy (TEM) observations of the yeast ultrastructure confirmed serious morphological and structural damages. A homogeneous protein-binding distribution of nanosilver all over the cell was assumed, since the presence of electron-dense silver clusters was detected not only on the cell surface but also within the cell. For control experiments with the organosilicon matrix alone, no antimicrobial effect was observed, which was consistent with synchrotron FTIR results and TEM observations.
The present work was focused on elucidating biochemical changes in the model bacterium Escherichia coli exposed to ionic silver mediated stress, at a single-cell scale. In order to achieve this, in situ synchrotron Fourier-transform infrared (sFTIR) microspectroscopy was performed, for the first time, on individual cells by attenuated total reflectance (ATR) combined with the use of zinc-selenide hemisphere for high spatial resolution. In a first part, the potential of the method was evaluated on bacteria subjected to a lethal 100 μM AgNO(3) concentration for 2 h compared to untreated 100 % viable cells. Differences in cell composition were assessed for the C-H stretching and protein spectral regions, indicating that the inhibitory action was targeted against both fatty acids and proteins. Transmission electron microscopy (TEM) confirmed morphological damages of the cell ultrastructure. The relevance of ATR-sFTIR microspectroscopy for highlighting the heterogeneity in Ag(+)-mediated effects within a given bacterial population was also pointed out. In a second part, cells were exposed to sub-lethal Ag(+) concentrations (<10 μM AgNO(3)) tested under "dynamic" growth mode: early addition vs. pulse in the mid-exponential phase, and compared to simultaneously batch-grown untreated bacteria or cells sampled just before the pulse, respectively. sFTIR microspectroscopy and TEM imaging were performed in close relation with growth kinetics characterization. No significant effect of the Ag(+) pulses was detected, in accordance with macrokinetics data. For early-treated cells, effects on fatty acid composition were shown, although no major alteration of protein secondary structure was noticed. These partial effects were consistent with TEM observations and growth kinetics.
The present study aims at comparing the performances of three Lactobacillus reuteri strains (DSM 20016, DSM 17938, and ATCC 53608) in producing 3-hydroxypropionic acid (3-HP) from glycerol and at exploring inhibition phenomena during this bioconversion. Differences were highlighted between the three strains in terms of 3-HP production yield, kinetics of substrate consumption, and metabolite production. With a maximal productivity in non-optimal conditions (free pH) around 2 g.L(-1).h(-1) of 3-HP and 4 g.L(-1).h(-1) of 3-hydroxypropionaldehyde (3-HPA) depending on the strain, this study confirmed the potential of L. reuteri for the biotechnological production of 3-HP. Moreover, the molar ratios of 3-HP to 1,3-propanediol (1,3-PDO) obtained for the three strains (comprised between 1.25 and 1.65) showed systematically a higher 3-HP production. From these results, the DSM 17938 strain appeared to be the most promising strain. The impact of glycerol bioconversion on the bacteria's physiological state (a decrease of around 40 % in DSM 17938 cells showing an enzymatic activity after 3 h) and survival (total loss of cultivability after 2 or 3 h depending on the strains) was revealed and discussed. The effect of each metabolite on L. reuteri DSM 17938 was further investigated, displaying a drastic inhibition caused by 3-HPA, while 3-HP induced lower impact and only at acidic pH.
BACKGROUND: Bioconversion is a promising route to produce bio-based building blocks such as 3-hydroxypropionic acid (3-HP). Reactive extraction can be used for 3-HP recovery, and ultimately integrated to the bioconversion process. To the best of our knowledge, there is no published experimental data about the reactive extraction of 3-HP. This work aimed to study the extraction of 3-HP using tri-n-octylamine and Aliquat 336 as extractants in n-decanol. Comparison was also made with its positional isomer, lactic acid. Finally, the extraction of 3-HP from model and real bioconversion broths was examined.
The platform molecule 3-hydroxypropionic acid (3-HP) can be produced using Lactobacillus reuteri through a two-step bioprocess that involves a growth phase followed by a bioconversion phase. The bioproduction is performed by resting cells that convert glycerol into 3-HP and 1,3propanediol in fed-batch mode. This work aimed at studying the effect of the growth conditions of L. reuteri DSM 17938 during the first step, on the glycerol bioconversion into 3-HP during the second step. A Plackett and Burman design was carried out to test, in controlled bioreactors, the effect of 11 growth conditions simultaneously, at fixed bioconversion conditions. The supplementation of the growth medium with vitamin B12 and cysteine displayed a negative effect on the 3-HP bioproduction.
3-Hydroxypropanoic acid (3-HP) is an important biomass-derivable platform chemical that can be converted into a number of industrially relevant compounds. There have been several attempts to produce 3-HP from renewable sources in cell factories, focusing mainly on Escherichia coli, Klebsiella pneumoniae, and Saccharomyces cerevisiae. Despite the significant progress made in this field, commercially exploitable large-scale production of 3-HP in microbial strains has still not been achieved. In this study, we investigated the potential of Bacillus subtilis as a microbial platform for bioconversion of glycerol into 3-HP. Our recombinant B. subtilis strains overexpress the two-step heterologous pathway containing glycerol dehydratase and aldehyde dehydrogenase from K. pneumoniae. Genetic engineering, driven by in silico optimization, and optimization of cultivation conditions resulted in a 3-HP titer of 10 g/L, in a standard batch cultivation. Our findings provide the first report of successful introduction of the biosynthetic pathway for conversion of glycerol into 3-HP in B. subtilis. With this relatively high titer in batch, and the robustness of B. subtilis in high density fermentation conditions, we expect that our production strains may constitute a solid basis for commercial production of 3-HP.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.