This work reports on the analytical figures of merit of a low-dispersion aerosol transport system for high-throughput bulk and spatially resolved analysis via LA-ICP-MS. This device maximizes the collection of...

The stable 13 C/ 12 C isotope composition usually varies among different organic materials due to isotope fractionation during biochemical synthesis and degradation processes. Here, we introduce a novel laser ablation-isotope ratio mass spectrometry (LA-IRMS) methodology that allows highly resolved spatial analysis of carbon isotope signatures in solid samples down to a spatial resolution of 10 μm. The presented instrumental setup includes in-house-designed exchangeable ablation cells (3.8 and 0.4 mL, respectively) and an improved sample gas transfer, which allow accurate δ 13 C measurements of an acryl plate standard down to 0.6 and 0.4 ng of ablated carbon, respectively (standard deviation 0.25‰). Initial testing on plant and soil samples confirmed that microheterogeneity of their natural 13 C/ 12 C abundance can now be mapped at a spatial resolution down to 10 μm. The respective δ 13 C values in soils with C3/C4 crop sequence history varied by up to 14‰ across a distance of less than 100 μm in soil aggregates, while being partly sorted along rhizosphere gradients of <300 μm from Miscanthus plant roots into the surrounding soil. These very first demonstrations point to the appearance of very small metabolic hotspots originating from different natural isotope discrimination processes, now traceable via LA-IRMS.

Abstract. Latest advances in laser ablation inductively coupled plasma mass spectrometer (LA-ICPMS) allow for accurate in situ U−Pb dating of carbonate material, with final age uncertainties usually >3 % 2σ. Cross-laboratory reference materials (RMs) used for sample-bracketing are currently limited to WC1 calcite with an age of 254.4±6.5 (2σ). The minimum uncertainty on any age determination with the LA-ICPMS method is therefore ≥2.5 %, and validation by secondary RMs is usually performed on in-house standards. This contribution presents a new reference material, ASH-15, a flowstone that is dated here by isotope dilution (ID) thermal ionization mass spectrometry (TIMS) analysis using 37 sub-samples, 1–7 mg each. Age results presented here are slightly younger compared to previous ID isotope ratio mass spectrometry (IRMS) U−Pb dates of ASH-15 but within uncertainties and in agreement with in situ analyses using WC1 as the primary RM. We provide new correction parameters to be used as primary or secondary standardization. The suggested 238U∕206Pb apparent age, not corrected for disequilibrium and without common-lead anchoring, is 2.965±0.011 Ma (uncertainties are 95 % confidence intervals). The new results could improve the propagated uncertainties on the final age with a minimal value of 0.4 %, which is approaching the uncertainty of typical ID analysis on higher-U materials such as zircon. We show that although LA-ICPMS spot analyses of ASH-15 exhibit significant scatter in their isotopic ratios, the down-hole fractionation of ASH-15 is similar to that of other reference materials. This high-U (≈1 ppm) and low-Pb (<0.01 ppm) calcite is most appropriate as a reference material for other speleothem-type carbonates but requires more-sensitive ICP-MS instruments such as the new generation of single-collector and multi-collector ICP-MS. Reference materials with high-Pb and low-U or both low-U and low-Pb compositions are still needed to fully cover the compositional range of carbonate material but may introduce analytical challenges.

No abstract

Abstract. Latest advances in laser ablation inductively coupled plasma mass spectrometer (LA-ICPMS) allow for accurate in-situ U-Pb dating of carbonate material, with final age uncertainties usually > 3 % 2σ. Cross-laboratory reference materials (RMs) used for sample-bracketing are currently limited to WC1 calcite with an age of 254.4 ± 6.5 (2σ). The minimum uncertainty on any age determination with the LA-ICPMS method is therefore ≥ 2.5 %, and validation by secondary RMs are usually performed on in-house standards. This contribution present a new reference material, ASH-15, a flowstone that is dated here by high-precision Isotope Dilution (ID) TIMS analysis using 36 sub-samples, 1–7 mg each. Age results presented here are slightly younger compared to previous ID dating of ASH-15, but in agreement with in-situ analyses (using WC1 as a RM). We provide new correction parameters to be used as primary or secondary standardization. The suggested 238U/206Pb apparent age, not corrected for disequilibrium and without common-lead anchoring, is 2.965 ± 0.011 Ma (2σ). The new results could improve the propagated uncertainties on the final age with a minimal value of 0.4%, which is approaching the uncertainty of typical ID analysis on, for example, zircon (

The introduction of rapid response laser ablation cells and sample transport technologies to laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) has enabled signal pulse durations for a single laser ablation shot of less than 10 ms. These developments have resulted in marked improvements in analytical throughput, resolution, and sensitivity vital for the generation of large, highly spatially resolved elemental maps. The focus on mapping, particularly bioimaging, has obscured the possibility of applying the sensitivity advantage of rapid response technologies to other LA-ICPMS applications, such as high-precision isotope ratio analysis on multicollector (MC) ICPMS. In this work a commercially available rapid response sample transport system and a conventional configuration were compared for LA-MC-ICPMS analysis. Ablation of known reference materials demonstrated "sensitivity" or sample ion yield of 7-9% using the rapid response sample transport system, more than double that for the conventional setup. This increase in efficiency was demonstrated to improve precision for the Pb isotope ratio analysis of the MPI-DING reference glasses and improve the spatial resolution of Hf isotope ratio analysis of reference zircons.

No abstract

For high-speed and high-resolution elemental LA-ICP-QMS mapping it is important to select the optimal operational conditions to avoid aliasing, minimize blur and maximize the signal-to-noise ratio. An earlier paper already...