In nanocomposites containing single wall carbon nanotubes (SWCNTs), the final properties strongly depend on the dispersion quality of these fillers. Various methods have been used to improve the dispersion of nanofillers; however, one of the most effective ways is to functionalize carbon nanotubes (CNTs) with covalent and noncovalent functional groups. In this work, the dispersion of SWCNTs in an epoxy system was studied by using surfactants, acid (COOH), and ester groups (PGE)-modified CNTs. Rheological and scanning electron microscopy analysis showed that functionalization of CNTs helped in improving the dispersion of fillers in the epoxy matrix. Systems with surfactant modified SWCNTs (1 wt%) exhibited the highest storage modulus at low frequencies after 5-min sonication. This behavior is associated to a stronger network of fillers as a result of a good dispersion. However, longer sonication times lowered the storage modulus, corresponding to a degradation of the tubes. The effect of the dispersion quality on mechanical properties was also studied using a three-point bending set-up.
Multi-walled carbon nanotubes (CNTs) and cellulose nanofibers (CNFs) reinforced shape memory polyurethane (PU) composite fibers and films have been fabricated via extrusion and casting methods. Cellulose nanofibers were obtained through acid hydrolysis of microcrystalline cellulose. This treatment aided in achieving stable suspensions of cellulose crystals in dimethylformamide (DMF), for subsequent incorporation into the shape memory matrix. CNTs were covalent functionalized with carboxyl groups (CNT-COOH) and 4,4 0 -methylenebis (phenylisocyanate) (MDI) (CNT-MDI) to improve the dispersion efficiency between the CNT and the polyurethane. Significant improvement in tensile modulus and strength were achieved by incorporating both fillers up to 1 wt% without sacrificing the elongation at break. Electron microscopy was used to investigate the degree of dispersion and fracture surfaces of the composite fibers and films. The effects of the filler (type and concentration) on the degree of crystallinity and thermal properties of the hard and soft segments that form the PU sample were studied by calorimetry. Overall, results indicated that the homogeneous dispersion of nanotubes and cellulose throughout the PU matrix and the strong interfacial adhesion between nanotubes and/or cellulose and the matrix are responsible for the enhancement of mechanical and shape memory properties of the composites. POLYM. COMPOS., 32:455-463, 2011. ª
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.