We developed a novel, low-cost and simple method for the fabrication of microfluidic paper-based analytical devices (μPADs) by silanization of filter cellulose using a paper mask having a specific pattern. The paper mask was penetrated with trimethoxyoctadecylsilane (TMOS) by immersing into TMOS-heptane solution. By heating the filter paper sandwiched between the paper mask and glass slides, TMOS was immobilized onto the filter cellulose via the reaction between cellulose OH and TMOS, while the hydrophilic area was not silanized because it was not in contact with the paper mask penetrated with TMOS. The effects of some factors including TMOS concentration, heating temperature and time on the fabrication of μPADs were studied. This method is free of any expensive equipment and metal masks, and could be performed by untrained personnel. These features are very attractive for the fabrication and applications of μPADs in developing countries or resource-limited settings. A flower-shaped μPAD was fabricated and used to determine glucose in human serum samples. The contents determined by this method agreed well with those determined by a standard method.

An experiment was developed to demonstrate a microfluidic device in the analytical chemistry (instrumental analysis) laboratory. Students made the paper-based microfluidic device with a wax pen and a piece of filter paper and used it to determine the total quantity of amino acids in a green tea leaf extract. The device is low cost, easy-to-make, and easy-to-use. The student results compared favorably with those from standard method.

The deformation and recovery behaviors of multilayer microcapsules were investigated after being forced to flow through a microchannel. The microchannel device with a constriction (5.7 μm in depth) in the middle was designed, and the multilayer microcapsules with different size and layer thickness (and thereby different mechanical strength) were used. Deformation in the microchannel was observed for all the capsules with a size larger than the constriction height, and its extent was mainly governed by the difference between capsule size and constriction height. The squeezed microcapsules could recover their original spherical shape when the deformation extent was smaller than 16%, whereas permanent physical deformation took place when the deformation extent was larger than 34%. The capsules filled with polyelectrolytes could greatly enhance their shape recovery ability due to the higher osmotic pressure in the capsule interior and could well maintain the preloaded low-molecular-weight dyes regardless of the squeezing.

We developed a novel strategy for fabrication of microfluidic paper-based analytical devices (μPADs) by selective wet etching of hydrophobic filter paper using a paper mask having a specific design. The fabrication process consists of two steps. First, the hydrophilic filter paper was patterned hydrophobic by using trimethoxyoctadecylsilane (TMOS) solution as the patterning agent. Next, a paper mask penetrated with NaOH solution (containing 30% glycerol) was aligned onto the hydrophobic filter paper, allowing the etching of the silanized filter paper by the etching reagent. The masked region turned highly hydrophilic whereas the unmasked region remains highly hydrophobic. Thus, hydrophilic channels, reservoirs, and detection zones were generated and delimited by the hydrophobic barriers. The effects of some factors including TMOS concentration, etching temperature, etching time, and NaOH concentration on fabrication of μPAD were studied. Being free of any expensive equipment, metal mask and expensive reagents, this rapid, simple, and cost-effective method could be used to fabricate μPAD by untrained personnel with minimum cost. A flower-shaped μPAD fabricated by this presented method was applied to the glucose assay in artificial urine samples with good performance, indicating its feasibility as a quantitative analysis device. We believe that this method would be very attractive to the development of simple microfluidic devices for point-of-care applications in clinical diagnostics, food safety, and environmental protection.

μPADS were fabricated by inkjet printing of permanent marker ink on filter paper, followed by evaporation of solvent.

We presented a distance-based detection method for visual quantification of mercury ions on a microfluidic paper-based analytical device (μPAD). Dithizone in NaOH solution was used as chromogenic reagent and deposited onto paper channel delimited by hydrophobic wax barrier. Reactions happened between mercury ions and dithizone to form an insoluble colored complex, producing colored precipitate on the paper channel. The length of colored precipitate could be readily measured using the printed ruler along each device. The length of precipitate increase linearly with the mercury concentrations, mercury in sample solution could be quantified by measuring the length of the colored precipitate. Being free of any electronic instruments, this method has the advantages of portability, ease of use, low cost and disposability. This presented method was used to detect mercury ions in a synthetic sample, demonstrating its potential in on-site and real time analysis.

No abstract

A demonstration is described of electrophoretic separation of carmine and sunset yellow with a paper-based device. The channel in the paper device was fabricated by hand with a wax pen. Electrophoretic separation of carmine and sunset yellow was achieved within a few minutes by applying potential on the channel using a simple and inexpensive power supply. This demonstration could not only motivate the students' passion in learning analytical chemistry but also introduce two important analytical techniques (microfluidic paperbased analytical devices and electrophoresis) to the classroom. With further modification and improvement, this demonstration may be suitable for students to perform as a laboratory experiment in the teaching lab.