In this research, we used a polycrystalline silicon nanowire field-effect transistor (poly-Si NWFET) as a biosensor that employs the sidewall spacer technique instead of an expensive electron beam lithography method. When compared with commercial semiconductor processes, the sidewall spacer technique has the advantages of simplicity and low cost. In this study, we employed a novel poly-Si NWFET device for real-time, label-free, and ultrahigh-sensitivity detection of prostate-specific antigen (PSA) in human serum. Since serum proteome is very complex containing high levels of salts and other interfering compounds, we hereby developed a standard operating procedure for real-sample pretreatment to keep a proper pH value and ionic strength of the desalted serum and also utilized Tween 20 to serve as the passivation agent by surface modification on the NWFET to reduce nonspecific binding for medical diagnostic applications. We first modified 3-aminopropyltriethoxysilane on the surface of a poly-Si nanowire device followed by glutaraldehyde functionalization, and the PSA antibodies were immobilized on the aldehyde terminal. While PSA was prepared in the buffers to maintain an appropriate pH value and ionic strength, the results indicated that the sensor could detect trace PSA at less than 5 fg/mL in a microfluidic channel. The novel poly-Si NWFET is developed as a diagnostic platform for monitoring prostate cancer and predicting the risk of early biochemical relapse.

Kinetic and thermodynamic studies reveal that the property of significantly enhanced catalytic activity with colloidal stability is attributed to an efficacious means of tuning enzyme-substrate association by varying with the rate constants in the presence of functionalized gold nanoparticles.

A series of experiments were performed to systematically analyze the effect of nanoparticle (NP) size on the catalytic behavior of enzyme-NP conjugates, and a shielding model based on diffusion-collision theory was developed to explain the correlation between the size effects and the kinetic responses.

No abstract

A new organic-organic nanoscale composite thin-film (NCTF) dielectric has been synthesized by solution deposition of 1-bromoadamantane and triblock copolymer (Pluronic P123, BASF, EO20-PO70-EO20), in which the precursor solution has been achieved with organic additives. We have used a sol-gel process to make a metal-insulator-metal capacitor (MIM) comprising a nanoscale (10 nm-thick) thin-film on a flexible polyimide (PI) substrate at room temperature. Scanning electron microscope and atomic force microscope revealed that the deposited NCTFs were crack-free, uniform, highly resistant to moisture absorption, and well adhered on the Au-Cr/PI. The electrical properties of 1-bromoadamantane-P123 NCTF were characterized by dielectric constant, capacitance, and leakage current measurements. The 1-bromoadamantane-P123 NCTF on the PI substrate showed a low leakage current density of 5.5 x 10(-11) A cm(-2) and good capacitance of 2.4 fF at 1 MHz. In addition, the calculated dielectric constant of 1-bromoadamantane-P123 NCTF was 1.9, making them suitable candidates for use in future flexible electronic devices as a stable intermetal dielectric. The electrical insulating properties of 1-bromoadamantane-P123 NCTF have been improved due to the optimized dipole moments of the van der Waals interactions.

Through a mineralization process, Nap-FFC peptides produced transparent silver nanoparticle-based hydrogels (AgNPs@Nap-FFC) for antibacterial wound dressing.

Peptide-based supramolecular hydrogels have been comprehensively investigated in biomaterial applications because of their unique bioactivity, biofunctionality, and biocompatible features. However, the presence of organic building blocks in peptide-based hydrogels often results in low mechanical stability. To expand their practical use and range of applications, it is necessary to develop the tool kit available to prepare bioinspired, peptide-based supramolecular hydrogels with improved mechanical stability. In this paper, we present an innovative electrostatic and cross-linking approach in which naphthyl-Phe-Phe-Cys (NapFFC) oligopeptides are combined with gold nanoparticles (AuNPs) and calcium ions (Ca(2+)) to produce peptide-based supramolecular hydrogels. We further investigate the interactions among NapFFC, AuNPs and Ca(2+) by microscopy. The morphology of the nanofibrous network constructions and the binding forces exhibited from the hydrogel demonstrated that the combination of two mechanisms successfully enhanced the mechanical stability through the formation of a densely entangled fibrous network of peptide multimers that is attributed to the AuNP linkage and Ca(2+)-induced agglomeration. UV-vis spectrophotometry and fluorescence analysis were also used to demonstrate the enhanced stability of the hydrogel under various conditions such as thermal, solvent erosion, pH value and sonication. All results indicate that the presence of AuNPs and Ca(2+) can strengthen the prepared hydrogel by more than doubling the diameter of NapFFC nanofibers, enabling the formation of stronger frameworks and slowing the release of components. Further experiments confirmed that HeLa cells can grow on the bioinspired NapFFC-AuNP hydrogel and exhibit high cell viability and that these cells were killed on contact with a hydrogel containing a drug. Our peptide-based supramolecular hydrogels prepared from the observed electrostatic and cross-linking mechanisn exhibited a significantly improved mechanical stability, making them well suited to use as a drug carrier in hydrogel dressings and as extracellular materials (ECMs) for tissue engineering.

An organic-organic blend thin film has been synthesized through the solution deposition of a triblock copolymer (Pluronic P123, EO20-PO70-EO20) and polystyrene (PS), which is called P123-PS for the blend film whose precursor solution was obtained with organic additives. In addition to having excellent insulating properties, these materials have satisfied other stringent requirements for an optimal flexible device: low-temperature fabrication, nontoxic, surface free of pinhole defect, compatibility with organic semiconductors, and mechanical flexibility. Atomic force microscope measurements revealed that the optimized P123-PS blend film was uniform, crack-free, and highly resistant to moisture absorption on polyimide (PI) substrate. The film was well-adhered to the flexible Au/Cr/PI substrate for device application as a stable insulator, which was likely due to the strong molecular assembly that includes both hydrophilic and hydrophobic effects from the high molecular weights. The contact angle measurements for the P123-PS surface indicated that the system had a good hydrophobic surface with a total surface free energy of approximately 19.6 mJ m(-2). The dielectric properties of P123-PS were characterized in a cross-linked metal-insulator-metal structured device on the PI substrate by leakage current, capacitance, and dielectric constant measurements. The P123-PS film showed an average low leakage current density value of approximately 10(-10) A cm(-2) at 5-10 MV cm(-1) and large capacitance of 88.2 nF cm(-2) at 1 MHz, and the calculated dielectric constant was 2.7. In addition, we demonstrated an organic thin-film transistor (OTFT) device on a flexible PI substrate using the P123-PS as the gate dielectric layer and pentacene as the channel layer. The OTFT showed good saturation mobility (0.16 cm(2) V(-1) s(-1)) and an on-to-off current ratio of 5 × 10(5). The OTFT should operate under bending conditions; therefore flexibility tests for two types of bending modes (tensile and compressive) were also performed successfully.