ResumoO objetivo deste trabalho foi avaliar o efeito do arranjo espacial de plantio na forma do fuste de árvores de eucalipto. Foram utilizados dados de um experimento implantado em dezembro de 2002, no delineamento em blocos (três blocos), sendo testados os arranjos espaciais de 3,0 x 0,5; 3,0 x 1,0; 3,0 x 1,5; 3,0 x 2,0 e 3,0 x 3,0 m. Aos oito anos de idade foram abatidas e cubadas 180 árvores. Esses dados foram utilizados para ajustar os modelos de afilamento propostos por Garay e de Schöepfer. Testes de identidade de modelos foram aplicados nas equações com a finalidade de verificar a igualdade entre a forma dos fustes. O modelo de Garay é o mais indicado para descrever o afilamento de eucalipto nos arranjos espaciais avaliados. Foi aceita a hipótese de nulidade no teste de identidade de modelos não linear, indicando a igualdade entre as equações nos arranjos de 3,0 x 0,5 e 3,0 x 1,0 m. Para uma distância de 3 metros entre fileiras, quanto maior a distância entre plantas, mais cônica é a forma do fuste.Palavras-chave: afilamento, espaçamento, identidade de modelos. AbstractThe objective of this study was to evaluate the effect of the spatial arrangement of planting on the stem form of eucalypt trees. Data used were from an experiment established in December 2002, in random blocks design (three blocks), with the spatial arrangements of 3,0 x 0,5; 3,0 x 1,0; 3,0 x 1,5; 3,0 x 2,0 and 3,0 x 3,0 m being tested. At eight years of age 180 trees were harvested and cubed. These data were used to adjust the taper models of Garay and Schöepfer. Model identity tests were applied on the fitted equations in order to verify the equivalence between the shapes of the boles. The Garay model is the most suitable to describe the taper of eucalypts in the evaluated spatial arrangements. The null hypothesis in the identity test of nonlinear models was accepted, indicating equality between the equations in the arrangements of 3,0 x 0,5 and 3,0 x 1,0 m. For a distance of 3,0 m between the rows; the greater the distance between plants the most conical shaped is the bole.Keywords: taper, spacing, identity of models. INTRODUÇÃOA forma do fuste ou seu afilamento é definida pela taxa de decréscimo do diâmetro (d) ao longo do fuste da árvore. Ela pode variar com a espécie ou material genético, arranjo espacial e tratos silviculturais (poda e desbaste), além da capacidade produtiva do local (CAMPOS; LEITE, 2013), e o seu estudo é feito por meio de modelos matemáticos que expressam o afilamento do fuste.
A madeira é um dos os compostos orgânicos mais utilizados como matéria-prima no mundo. Suas características químicas, anatômicas e físicas variam sensivelmente mediante aos fatores ambientais. No Cerrado, os solos são naturalmente pobres e com estações secas prolongadas. O estudo das propriedades da madeira produzida nesse bioma é relevante para compreensão das adaptações morfológicas no xilema secundário para sobrevivência da planta. Objetivou-se estudar as variações e correlações entre propriedades físicas e biométricas de fibras na madeira de Caryocar brasiliense Cambess. do cerrado de Minas Gerais. Coletou-se amostras de incremento do lenho de três árvores, utilizando-se trado de Pressler na altura de 1,30 m em relação ao solo. Determinou-se a densidade, umidade e dimensões das fibras da madeira no sentido medula-casca. Os parâmetros físicos variaram em função das árvores e da posição radial. As médias de densidade básica e umidade verde foram de 0,56 g/cm³ e 96,28%, respectivamente. A tendência observada nas propriedades físicas repetiu-se para os parâmetros biométricos das fibras. As médias de largura, espessura e comprimento de fibras foram 24,13 μm, 5,16 μm e 2,65 mm, respectivamente. O padrão de variação radial da madeira de pequi-do-cerrado indicou que ao se afastar da medula, a densidade básica e o comprimento das fibras são crescentes. Por outro lado, a umidade verde é decrescente. Para largura e espessura da parede celular das fibras não detectou-se tendências claras. Entre as árvores de C. brasiliense, constatou-se variação e correlação das propriedades físicas e particularidades anatômicas da madeira na mesma tipologia de cerrado.
Com o emprego de adesivos pode-se obter um grande número de produtos derivados da madeira. Para confecção industrial de produtos de madeira colada, normas reconhecidas internacionalmente exigem que a adesão da madeira seja testada segundo procedimentos padronizados e que nos resultados destes testes seja reportado, além da resistência das juntas, o porcentual de falha na madeira. Para avaliação da falha a norma ASTM D5266-99 recomenda o emprego de uma rede de quadrículas traçada sobre um material transparente. Contudo, esta avaliação, além de demandar muito tempo, ainda é realizada com muita subjetividade. A hipótese do presente trabalho é que se pode quantificar a falha na madeira com um sistema de visão artificial, tornando o procedimento mais rápido e menos sujeito à subjetividade. Foram testados dois tipos de algoritmos de limiarização automática em imagens adquiridas com digitalizadores de mesa. Concluiu-se que a falha na madeira pode ser quantificada por limiarização automática em substituição ao método convencional das quadrículas. Os algoritmos testados apresentaram erro médio absoluto menor que 3% em relação ao sistema convencional da rede quadriculada.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.