Magnetic gears offer significant advantages such as low noise and vibration level, lower maintenance and higher reliability compared to mechanical gears and are suitable for many applications in the industry. The coaxial magnetic gear has been extensively discussed in the literature, since it achieves higher torque densities amongst other magnetic gear configurations. The magnetic field is generated by permanent magnets mounted on the two rotors and a modulator between them. The modulator consists of ferromagnetic segments that are typically encased in a resin in order to increase its stiffness without compromising the generated magnetic field. However, due to the development of radial forces, oscillations of the ferromagnetic segments occur, which lead to torque ripples that affect the operation of the coaxial magnetic gear drive in applications where accuracy is required. This work introduces a computationally lightweight analytical 2D model in order to determine the applied radial force on the ferromagnetic segments at each angle of rotation of the two rotors and henceforth calculate the displacement of these segments using FEA. In this way it is possible to assess the variation of the torque (ripple) versus the angle of rotation of the input or output shaft. A parametric investigation examining the influence of the ferromagnetic segment thickness on the resulting torque ripple of a specific drive was carried out illustrating the benefits of the analytical models developed herein.
A novel numerical second order transient thermal model for beta-type Stirling engines (TTMS) was developed taking into account the transient heat transfer between the engine cylinder walls and pistons and the working gas in the expansion and compression space in order to determine the total power output and thermal efficiency with higher accuracy. The time-dependent energy equilibriums were formulated by including the transient thermal response of the cylinder walls and pistons until steady state operation was achieved. In addition, the transient response of the heat exchangers (cooler, regenerator and heater) was developed in order to determine more accurately the enthalpy of the working gas that enters or exits each compartment of the engine. The solution of the governing differential equations at each time step can be achieved with the implementation of a conventional fixed point algorithm. Various loss mechanisms were incorporated in order to increase the accuracy of the developed model. The TTMS was applied to the GPU-3 Stirling engine and the thermal response of the engine was calculated. The steady state results were compared to both experimental results and other numerical second order models in the literature which showed that TTMS can predict the thermal efficiency and the power output of the engine with an improved accuracy of as high as 65% and 62% respectively compared to the more advanced second order models published in the literature. The information of the transient response of the engine will be valuable for automotive and other energy applications in the industry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.