This paper presents the development of an integrated approach which targets the aerodynamic design of separate-jet exhaust systems for future gas-turbine aero-engines. The proposed framework comprises a series of fundamental modeling theories which are applicable to engine performance simulation, parametric geometry definition, viscous/compressible flow solution, and design space exploration (DSE). A mathematical method has been developed based on class-shape transformation (CST) functions for the geometric design of axisymmetric engines with separate-jet exhausts. Design is carried out based on a set of standard nozzle design parameters along with the flow capacities established from zero-dimensional (0D) cycle analysis. The developed approach has been coupled with an automatic mesh generation and a Reynolds averaged Navier–Stokes (RANS) flow-field solution method, thus forming a complete aerodynamic design tool for separate-jet exhaust systems. The employed aerodynamic method has initially been validated against experimental measurements conducted on a small-scale turbine powered simulator (TPS) nacelle. The developed tool has been subsequently coupled with a comprehensive DSE method based on Latin-hypercube sampling. The overall framework has been deployed to investigate the design space of two civil aero-engines with separate-jet exhausts, representative of current and future architectures, respectively. The inter-relationship between the exhaust systems' thrust and discharge coefficients has been thoroughly quantified. The dominant design variables that affect the aerodynamic performance of both investigated exhaust systems have been determined. A comparative evaluation has been carried out between the optimum exhaust design subdomains established for each engine. The proposed method enables the aerodynamic design of separate-jet exhaust systems for a designated engine cycle, using only a limited set of intuitive design variables. Furthermore, it enables the quantification and correlation of the aerodynamic behavior of separate-jet exhaust systems for designated civil aero-engine architectures. Therefore, it constitutes an enabling technology toward the identification of the fundamental aerodynamic mechanisms that govern the exhaust system performance for a user-specified engine cycle.
This paper describes current progress in the development of methods to assess aero-engine airframe installation effects. The aerodynamic characteristics of isolated intakes, a typical transonic transport aircraft as well as a combination of a through-flow nacelle and aircraft configuration have been evaluated. The validation task for an isolated engine nacelle is carried out with concern for the accuracy in the assessment of intake performance descriptors such as mass flow capture ratio and drag rise Mach number. The necessary mesh and modelling requirements to simulate the nacelle aerodynamics are determined. Furthermore, the validation of the numerical model for the aircraft is performed as an extension of work that has been carried out under previous drag prediction research programmes. The validation of the aircraft model has been extended to include the geometry with through flow nacelles. Finally, the assessment of the mutual impact of the through flow nacelle and aircraft aerodynamics was performed. The drag and lift coefficient breakdown has been presented in order to identify the component sources of the drag associated with the engine installation. The paper concludes with an assessment of installation drag for through-flow nacelles and the determination of aerodynamic interference between the nacelle and the aircraft. KeywordsEngine-airframe integration, through-flow nacelle, aerodynamic interference, computational fluid dynamics, NASA Common Research Model
Future turbo-fan engines are expected to operate at low specic thrust with high bypass ratios to improve propulsive eciency. Typically, this can result in an increase in fan diameter and nacelle size with the associated drag and weight penalties. Therefore, relative to current designs, there is a need to develop more compact, shorter nacelles to reduce drag and weight. These designs are inherently more challenging and a system is required to explore and dene the viable design space. Due to the range of operating conditions, nacelle aerodynamic design poses a signicant challenge. This work presents a multi-objective optimisation approach using an evolutionary genetic algorithm for the design of new aero-engine nacelles. The novel framework includes a set of geometry denitions using Class Shape Transformations, automated aerodynamic simulation and analysis, a genetic algorithm, evaluations at various nacelle operating conditions and the inclusion of additional aerodynamic constraints. This framework has been applied to investigate the design space of nacelles for high bypass ratio aero-engines. The multi-objective optimisation was successfully demonstrated for the new nacelle design challenge and the overall system was shown to enable the identication of the viable nacelle design space.
The aerodynamic performance of the bypass exhaust system is key to the success of future civil turbofan engines. This is due to current design trends in civil aviation dictating continuous improvement in propulsive efficiency by reducing specific thrust and increasing bypass ratio (BPR). This paper aims to develop an integrated framework targeting the automatic design optimization of separate-jet exhaust systems for future aero-engine architectures. The core method of the proposed approach is based on a standalone exhaust design tool comprising modules for cycle analysis, geometry parameterization, mesh generation, and Reynolds-averaged Navier–Stokes (RANS) flow solution. A comprehensive optimization strategy has been structured comprising design space exploration (DSE), response surface modeling (RSM) algorithms, as well as state-of-the-art global/genetic optimization methods. The overall framework has been deployed to optimize the aerodynamic design of two civil aero-engines with separate-jet exhausts, representative of current and future engine architectures, respectively. A set of optimum exhaust designs have been obtained for each investigated engine and subsequently compared against their reciprocal baselines established using the current industry practice in terms of exhaust design. The obtained results indicate that the optimization could lead to designs with significant increase in net propulsive force, compared to their respective notional baselines. It is shown that the developed approach is implicitly able to identify and mitigate undesirable flow-features that may compromise the aerodynamic performance of the exhaust system. The proposed method enables the aerodynamic design of optimum separate-jet exhaust systems for a user-specified engine cycle, using only a limited set of standard nozzle design variables. Furthermore, it enables to quantify, correlate, and understand the aerodynamic behavior of any separate-jet exhaust system for any specified engine architecture. Hence, the overall framework constitutes an enabling technology toward the design of optimally configured exhaust systems, consequently leading to increased overall engine thrust and reduced specific fuel consumption (SFC).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.