Access and use of this website and the material on it are subject to the Terms and Conditions set forth at Certification of a fish otolith reference material in support of quality assurance for trace element analysis Sturgeon, R.; Willie, S. N.; Yang, L.; Greenberg, R.; Spatz, R. O.; Chen, Z.; Scriver, C.; Clancy, V.; Lam, J.; Thorrold, S.http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=fr L'accès à ce site Web et l'utilisation de son contenu sont assujettis aux conditions présentées dans le site LISEZ CES CONDITIONS ATTENTIVEMENT AVANT D'UTILISER CE SITE WEB. NRC Publications Record / Notice d'Archives des publications de CNRC:http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?action=rtdoc&an=5763825&lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?action=rtdoc&an=5763825&lang=fr READ THESE TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS WEBSITE.http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en Vous avez des questions? Nous pouvons vous aider. Pour communiquer directement avec un auteur, consultez la première page de la revue dans laquelle son article a été publié afin de trouver ses coordonnées. Si vous n'arrivez pas à les repérer, communiquez avec nous à PublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. Questions? Contact the NRC Publications Archive team atPublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca. If you wish to email the authors directly, please see the first page of the publication for their contact information. NRC Publications Archive Archives des publications du CNRCThis publication could be one of several versions: author's original, accepted manuscript or the publisher's version. / La version de cette publication peut être l'une des suivantes : la version prépublication de l'auteur, la version acceptée du manuscrit ou la version de l'éditeur. For the publisher's version, please access the DOI link below./ Pour consulter la version de l'éditeur, utilisez le lien DOI ci-dessous.http://doi.org/10.1039/b503655kJournal of Analytical Atomic Spectrometry, 20, 10, pp. 1067Spectrometry, 20, 10, pp. -1071Spectrometry, 20, 10, pp. , 2005 Certification of a fish otolith reference material in support of quality assurance for trace element analysisw Production and certification activities relating to the development of a new Certified Reference Material (FEBS-1) based on a fish otolith matrix are described. The material was prepared from 4.5 kg of dried saggital otolith harvested from the red snapper (Lutjanus campechanus), ball milled and sieved to o200 mesh, homogenized, irradiated, bottled into 1 g aliquots and certified for major, minor and trace element composition using inductively coupled plasma mass spectrometry (ICP-MS), isotope dilution-ICP-MS, neutron activation, ICP-optical emission spectrometry and X-ray fluorescence. Several laboratories participated in this activity, providing for a robust estimate of each measurand. Certified values for seven elements (Ba, Ca, Li, Mg, Mn, Na and Sr) are reported, accompanied by full GUM uncertain...

A new selenized yeast reference material (SELM-1) produced by the Institute for National Measurement Standards, National Research Council of Canada (INMS, NRC) certified for total selenium (2,059+/-64 mg kg(-1)), methionine (Met, 5,758+/-277 mg kg(-1)) and selenomethionine (SeMet, 3,431+/-157 mg kg(-1)) content is described. The +/-value represents an expanded uncertainty with a coverage factor of 2. SeMet and Met amount contents were established following a methanesulfonic acid digestion of the yeast using GC-MS and LC-MS quantitation. Isotope dilution (ID) calibration was used for both compounds, using 13C-labelled SeMet and Met. Total Se was determined after complete microwave acid digestion based on ID ICP-MS using a 82Se spike or ICP-OES spectrometry using external calibration. An international intercomparison exercise was piloted by NRC to assess the state-of-the-art of measurement of selenomethione in SELM-1. Determination of total Se and methionine was also attempted. Seven laboratories submitted results (2 National Metrology Institutes (NMIs) and 5 university/government laboratories). For SeMet, ten independent mean values were generated. Various acid digestion and enzymatic procedures followed by LC ICP-MS, LC AFS or GC-MS quantitation were used. Four values were based on species-specific ID calibration, one on non-species-specific ID with the remainder using standard addition (SA) or external calibration (EC). For total selenium, laboratories employed various acid digestion procedures followed by ICP-MS, AFS or GC-MS quantitation. Four laboratories employed ID calibration, the remaining used SA or EC. A total of seven independent results were submitted. Results for methionine were reported by only three laboratories, all of which used various acid digestion protocols combined with determination by GC-MS and LC UV. The majority of participants submitted values within the certified range for SeMet and total Se, whereas the intercomparison was judged unsuccessful for Met because only two external laboratories provided values, both of which were outside the certified range.

/npsi/ctrl?action=rtdoc&an=12338532&lang=en http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/ctrl?action=rtdoc&an=12338532&lang=fr READ THESE TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS WEBSITE.http://nparc.cisti-icist.nrc-cnrc.gc.ca/npsi/jsp/nparc_cp.jsp?lang=en Vous avez des questions? Nous pouvons vous aider. Pour communiquer directement avec un auteur, consultez la première page de la revue dans laquelle son article a été publié afin de trouver ses coordonnées. Si vous n'arrivez pas à les repérer, communiquez avec nous à PublicationsArchive-ArchivesPublications@nrc-cnrc.gc.ca.

No abstract

A simple, fast method is described for the determination of Ag, As, Cd, Cu, Cr, Fe, Ni, and Se in marine biological tissues by electrothermal atomic-absorption spectrometry (ETAAS) and Na, Ca, K, Mg, Fe, Cu, and Mn by inductively coupled plasma-atomic emission spectrometry (ICP-AES). Solubilization of the biological tissue was achieved by using formic acid with vortex mixing followed by heating to 50 degrees C in an ultrasonic bath. Once solubilized, the tissues were diluted to an appropriate volume with water for analysis. Aliquots were sampled into a graphite furnace and ICP-AES using a conventional autosampler. The method was validated by use of biological certified reference materials from NRC, DORM-2, DOLT-2, DOLT-3, LUTS-1, TORT-2, and NIST SRMs 1566b and 2976. Simplicity and reduced sample-preparation time prove to be the major advantages to the technique.