We report on the generation of extreme ultraviolet radiation utilizing the plasmonic field enhancement in arrays of bow-tie gold optical antennae. Furthermore, their suitability to support high-order harmonic generation is examined by means of finite-difference time-domain calculations and experiments. Particular emphasis is paid to the thermal properties, which become significant at the employed peak intensities. A damage threshold depending on the antenna length is predicted and confirmed by our experimental findings. Moreover, the gas density in the vicinity of the antennae is characterized experimentally to determine the number of atoms contributing to the measured radiation, which is almost an order of magnitude larger than previously reported.
Femtosecond laser pulses were used for the direct point-by-point inscription of waveguides into the cladding of standard single-mode fibers. Homogeneous S-shaped waveguides have been processed as a bundle of overlapping lines without damaging the surrounding material. Within these structures, FBGs have been successfully inscribed and characterized. A sensor device to measure the bending direction of a fiber was created by two perpendicular inscribed cladding waveguides with FBG. Finally, a complete 3D shape sensor consisting of several bending sensor planes, capable of detecting bending radii even below 2.5 cm is demonstrated.
We report on low-order harmonic generation utilising the plasmonic field enhancement in arrays of rodtype gold optical antennae. Furthermore, we examine their suitability to support high-order harmonic generation (HHG). The low-order harmonics are used as a tool to investigate the nonlinear properties of the antennae. Particular attention is paid to the thermal properties, which become significant at the peak intensities necessary for HHG. A theoretical model explains the experimental findings and enables future improvements. In experiments we observe up to the fifth harmonic order and measure a field enhancement sufficient to support high-order harmonic generation. Moreover, we find a damage threshold for the antennae.
Femtosecond laser pulses were used for the direct point-by-point inscription of phase-shifted fiber Bragg gratings (FBGs) in a single fabrication step without postprocessing. An electro-optic amplitude modulator is used in the setup to generate a defined delay between two identical laser pulse trains for the grating inscription. The grating structure with a central phase shift is formed by focusing the modulated laser pulses into the core of a fiber, while the fiber is translated with a constant velocity. The induced phase shift leads to a narrow transmission band with a bandwidth considerably below 10 pm within the stop band of the FBG. The inscribed FBGs show a birefringence of 3.9×10(-5) whereas their temperature and strain sensitivities are 10.4 pm/K and 1.4 pm/μstrain, respectively. The fabrication process is fast and offers a high grade of flexibility for the control of all grating parameters.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.