The interaction of water vapor with a single crystal ZnO(101̅0) surface was investigated using synchrotron-based ambient pressure X-ray photoelectron spectroscopy (APXPS). Two isobaric experiments were performed at 0.3 and 0.07 Torr water vapor pressure at sample temperatures ranging from 750 to 295 K up to a maximum of 2% relative humidity (RH). Below 10 % RH the ZnO(101̅0) interface is covered with ∼0.25 monolayers of OH groups attributed to dissociation at nonstoichiometric defect sites. At ∼10 % RH there is a sharp onset in increased surface hydroxylation attributed to reaction at stoichiometric terrace sites. The surface saturates with an OH monolayer ∼0.26 nm thick and occurs in the absence of any observable molecularly bound water, suggesting the formation of a 1 × 1 dissociated monolayer structure. This is in stark contrast to ultrahigh vacuum experiments and molecular simulations that show the optimum structure is a 2 × 1 partially dissociated HO/OH monolayer. The sharp onset to terrace site hydroxylation at ∼10 % RH for ZnO(101̅0) contrasts with APXPS observations for MgO(100) which show a sharp onset at 10 % RH. A surface thermodynamic analysis reveals that this shift to lower RH for ZnO(101̅0) compared to MgO(100) is due to a more favorable Gibbs free energy for terrace site hydroxylation.
Ambient pressure X-ray photoelectron spectroscopy (APXPS) is a powerful spectroscopy tool that is inherently surface sensitive, elemental, and chemical specific, with the ability to probe sample surfaces under Torr level pressures. Herein, we describe the design of a new lab-based APXPS system with the ability to swap small volume analysis chambers. Ag 3d(5/2) analyses of a silver foil were carried out at room temperature to determine the optimal sample-to-aperture distance, x-ray photoelectron spectroscopy analysis spot size, relative peak intensities, and peak full width at half maximum of three different electrostatic lens modes: acceleration, transmission, and angular. Ag 3d(5/2) peak areas, differential pumping pressures, and pump performance were assessed under varying N2(g) analysis chamber pressures up to 20 Torr. The commissioning of this instrument allows for the investigation of molecular level interfacial processes under ambient vapor conditions in energy and environmental research.
In this work we utilize experimental and simulation techniques to examine the molecular level interaction of water with a MnO(1 × 1) thin film deposited onto Ag(100). The formation of MnO(1 × 1)/Ag(100) was characterized by low energy electron diffraction and scanning tunneling microscopy. Density functional theory (DFT) shows MnO(1 × 1) is thermodynamically more stable than MnO(2 × 1) by ∼0.4 eV per MnO. Upon exposure to 2.5 Torr water vapor at room temperature, X-ray photoemission spectroscopy results show extensive surface hydroxylation attributed to reactivity at MnO(1 × 1) terrace sites. DFT calculations of a water monomer on MnO(1 × 1)/Ag(100) show the dissociated form is energetically more favorable than molecular adsorption, with a hydroxylation activation barrier 0.4 eV per HO. These results are discussed and contrasted with previous studies of MgO/Ag(100) which show a stark difference in behavior for water dissociation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.