No abstract

Articles you may be interested inComparative analysis of low-and high-swirl confined flames and jets by proper orthogonal and dynamic mode decompositions Phys. Fluids 26, 065109 (2014); Interaction of a synthetic jet with the flow over a low aspect ratio cylinder Phys. Fluids 25, 064104 (2013);

Flat-plate boundary layer transition induced by the wake vortex of a two-dimensional circular cylinder is experimentally investigated. Combined visualization and velocity measurements show a different transition route from the Klebanoff mode in free-stream turbulence-induced transition. This transition scenario is mainly characterized as: (i) generation of secondary transverse vortical structures near the flat plate surface in response to the von Kármán vortex street of the cylinder; (ii) formation of hairpin vortices due to the secondary instability of secondary vortical structures; (iii) growth of hairpins which is accelerated by wake-vortex induction; (iv) formation of hairpin packets and the associated streaky structures. Detailed investigation shows that during transition the evolution dynamics and self-sustaining mechanisms of hairpins, hairpin packets and streaks are consistent with those in a turbulent boundary layer. The wake vortex mainly plays the role of generating and destabilizing secondary transverse vortices. After that, the internal mechanisms become dominant and lead to the setting up of a self-sustained turbulent boundary layer.

The initial growth of a disturbance induced by a near-wall circular cylinder in a flat-plate boundary layer is experimentally investigated using both particle image velocimetry and hydrogen bubble visualization techniques. The secondary spanwise vortices appear in the near-wall region as a direct response to the outside passing wake vortices, consistent with previous studies on similar models (Pan et al., J. ). The streamwise variation of the total disturbance energy within the boundary layer shows a two-stage growth, which characterizes the initial transition process: the first exponential growth stage, followed by a region with slower growth rate. It is revealed that these two stages of growth are related to the formation and the destabilization of the secondary vortex in the near-wall region. The technique of dynamic mode decomposition is used to decompose the total disturbance into temporally orthogonalized modes, and it shows that the first growth stage largely results from the increased disturbance at the same frequency as that of the wake vortex shedding, while the second growth stage comprises the disturbance growth in a number of frequencies, especially the lower ones.

Evolution of Lagrangian coherent structures (LCS) in a flat plate boundary layer transition induced by the wake of a circular cylinder is investigated. Both hydrogen bubble visualization and particle image velocimetry (PIV) techniques are used. It is found that downstream of the cylinder, the disturbance in the boundary layer experiences a fast growth followed by a slow decay in the transition. Lagrangian coherent structures are revealed by qualitative hydrogen bubble visualizations and quantitative finite-time Lyapunov exponents (FTLE) fields derived from the PIV data. The evolution of the LCS is considered from the very beginning of the transition up to when the boundary layer becomes fully developed turbulent flow. The mean convection velocity and average inclination angle of the LCS are first extracted from the FTLE fields. The streamwise length of the low-speed streaks seems to increase, while their spanwise distance decreases in the boundary layer transition. Proper orthogonal decomposition (POD) of the PIV data shows that low-speed streaks associated with the hairpin vortices and hairpin packets are the dominant coherent structures close to the wall in the transitional and turbulent boundary layer. The POD modes also reveal a variety of scales in the turbulent boundary layer. Moreover, it is found that large-scale coherent structures can modulate the amplitude of the small-scale ones.

No abstract

No abstract

The dynamics of vortical structures in flow over a circular cylinder in the vicinity of a flat plate is investigated using particle image velocimetry (PIV). The cylinder is placed above the flat plate with its axis parallel to the wall and normal to the flow direction. The Reynolds number $Re_{D}$ based on the cylinder diameter $D$ is 1072 and the gap $G$ between the cylinder and the flat plate is varied from gap-to-diameter ratio $G/D=0$ to $G/D=3.0$. The flow statistics and vortex dynamics are strongly dependent on the gap ratio $G/D$. Statistics show that as the cylinder comes close to the wall ($G/D\leqslant 2.0$), the cylinder wake becomes more and more asymmetric and a boundary layer separation is induced on the flat plate downstream of the cylinder. The wake vortex shedding frequency increases with decreasing $G/D$ until a critical gap ratio (about $G/D=0.25$) below which the vortex shedding is irregular. The deflection of the gap flow away from the wall and its following interaction with the upper shear layer may be the cause of the higher shedding frequency. The vortex dynamics is investigated based on the phase-averaged flow field and virtual dye visualization in the instantaneous PIV velocity field. It is revealed that when the cylinder is close to the wall ($G/D=2.0$), the cylinder wake vortices can periodically induce secondary spanwise vortices near the wall. As the cylinder approaches the wall ($G/D=1.0$) the secondary vortex can directly interact with the lower wake vortex, and a further approaching of the cylinder ($G/D=0.5$) can result in more complex interactions among the secondary vortex, the lower wake vortex and the upper wake vortex. The breakdown of vortices into filamentary debris during vortex interactions is clearly revealed by the coloured virtual dye visualizations. For $G/D<0.25$, the lower shear layer is strongly inhibited and only the upper shear layer can shed vortices. Investigation of the vortex formation, evolution and interaction in the flow promotes the understanding of the flow physics for different gap ratios.