No abstract

Osteoporosis has been an enigma in terms of the administration of implant therapy. It has been implicated as a cause of implant failure as it directly affects the quality of the bone. The diagnosis of osteoporosis is mainly done by measuring skeletal bone mineral density (BMD). During implant therapy, the BMD of jaws can be evaluated on routine orthopantomogram (OPG) or cone beam CT (CBCT). The various advantages of CBCT include establishing a correlation between skeletal bone density and bone density of jaws and estimating its effect on implant stability in osteoporotic patients, which in turn will help in determining the prognosis of the implant in osteoporotic patients. This review is a summary of all patient-related studies conducted in the mentioned context of implant placement in patients with osteoporosis, treatment modalities, and prognosis. We performed a search of relevant articles on Google Scholar, PubMed, and Cochrane, which yielded a total of 25 articles for full-text reviews. After excluding some articles based on the exclusion criteria, a review was conducted along with a pilot study on implant placement in osteoporotic patients. Regional bone density can be a helpful parameter in predicting primary implant stability and it can be a useful indicator of skeletal BMD. With a careful evaluation of BMD, dental implants can be placed in patients with osteoporosis with a better prognosis for the treatment.

Background Facial mutilation and deformities can be caused by cancer, tumours, injuries, infections, and inherited or acquired deformities and has the potential to degrade one’s quality of life by interfering with fundamental tasks like communication, breathing, feeding, and aesthetics. Depending on the type of defect, producing maxillofacial prostheses for the rehabilitation of patients with various defects can be challenging and complex. The prosthesis is used to replace missing or damaged parts of the cranium and face, like the nose, auricle, orbit, and surrounding tissues, as well as missing areas of soft and hard tissue, with the primary goal of increasing the patient’s quality of life by rehabilitating oral functions such as speech, swallowing, and mastication. Traditional maxillofacial prosthesis impression and fabrication processes include a number of complicated steps that are costly, time-consuming, and uncomfortable for the patient. These rely on the knowledge of the maxillofacial team, dental clinicians, and maxillofacial technician. The foundation of the impression is the keystone for creating a prosthesis. However, this is the most time-consuming and difficult chair-side operation in maxillofacial prosthesis manufacturing since it requires prolonged interaction with the patient. The field of prosthesis fabrication is being transformed by the digital revolution. Digital technology allows for more accurate impression data to be gathered in less time (3 to 5 min) than traditional methods, lowering patient anxiety. Digital impressions eliminate the need for messy impression materials and provide patients with a more pleasant experience. This method bypasses the procedure of traditional gypsum model fabrication. This eliminates the disparity caused by a dimensional distortion of the impression material and gypsum setting expansion. Traditional dental impression processes leave enough room for errors, such as voids or flaws, air bubbles, or deformities, while current technology for prosthesis planning has emerged as an alternative means to improve patient acceptability and pleasure, not only because the end result is a precisely fitted restoration but also because the chair-side adjustments required are reduced. The most frequent approaches for creating 3D virtual models are the following. To begin, 3D scanning is employed, in which the subjects are scanned in three dimensions, and the point cloud data is used to create a virtual digital model. Methods It will be a hospital-based randomised control trial, carried out at the Department of Prosthodontics, Sharad Pawar Dental College, Sawangi (Meghe), Wardha, a part of Datta Meghe Institute of Medical Sciences (Deemed University). A total of 45 patients will be selected from the outpatient department (OPD) of the Department of Prosthodontics. All the patients will be provided written consent before their participation in the study. Methodology 1. Patient screening will be done, and the patient will be allocated to three techniques that are the conventional manual method, photogrammetry method, and 3D scanning in a randomised manner 2. The impression of the defect will be recorded by conventional manual method, photogrammetry method, and 3D scanning 3. The defect will be modelled in three ways: first is as per the manual dimension taken on the patient, second is the organisation of photographic image taken with lab standards and third is plotting of point cloud data to generate the virtual 3D model 4. For photogrammetric prosthesis design, finite photos/images will be taken at multiple angles to model the 3D virtual design. With the use of minimum photographs, the 3D modelling can be performed by using freeware, and a mould is obtained 5. The CAD software was used to design the prosthesis, and the final negative mould can be printed using additive manufacturing 6. The mould fabricated by all three methods will be analysed by a software using reverse engineering technology Study design: Randomised control trial Duration: 2 years Sample size: 45 patients Discussion Rodrigo Salazar-Gamarra1, Rosemary Seelaus, and Jorge Vicente Lopes da Silva et al., in the year 2016, discussed, as part of a method for manufacturing face prostheses utilising a mobile device, free software, and a photo capture protocol, that 2D captures of the anatomy of a patient with a facial defect were converted into a 3D model using monoscopic photogrammetry and a mobile device. The visual and technical integrity of the resulting digital models was assessed. The technological approach and models that resulted were thoroughly explained and evaluated for technical and clinical value. Marta Revilla-León, Wael Att, and Dr Med Dent et al. (2020) used a coordinate measuring equipment which was used to assess the accuracy of complete arch implant impression processes utilising conventional, photogrammetry, and intraoral scanning. Corina Marilena Cristache and Ioana Tudor Liliana Moraru et al. in the year 2021 provided an update on defect data acquisition, editing, and design using open-source and commercially available software in digital workflow in maxillofacial prosthodontics. This research looked at randomised clinical trials, case reports, case series, technical comments, letters to the editor, and reviews involving humans that were written in English and included detailed information on data acquisition, data processing software, and maxillofacial prosthetic part design. Trial registration CTRI/2022/08/044524. Registered on September 16, 2022

The surgical repair of a bone deficiency in the skull caused by a prior procedure or accident is known as cranioplasty. There are various types of cranioplasties, but the majority entail raising the scalp and reshaping the skull using either the original piece of bone from the skull or a specially molded graft created from Titanium (plate or mesh), artificial bone in place of, a stable biomaterial (prefabricated customized implant to match the exact contour and shape of the skull). Cranioplasty, one of the oldest surgical treatments for cranial abnormalities, has undergone several changes throughout the years to discover the best material to improve patient outcomes. Various materials have been utilized in cranioplasty throughout history. As biomedical technology progresses, surgeons will have access to new materials. There is still no agreement on the optimum material, and research into biologic and nonbiologic alternatives is ongoing in the hopes of finding the finest reconstruction material. The materials and techniques used in cranioplasty are covered in this article.

Tooth loss followed by complete denture rehabilitation can have significant psychological and social consequences for patients. Dentures restore a sense of normalcy and allow the sufferer to communicate with others in today's image-conscious world. Chewing discomfort, as well as unfavorable aesthetics and phonetics, are the most common denture complaints. A complete denture patient's prosthetic rehabilitation should never be confined to the replacement of lost teeth; rather, the ultimate goal should be the restoration of oral functions and aesthetics. The article describes a straightforward, cost-effective, practical, and aesthetic strategy for rehabilitating a complete denture patient with resorbed ridge, flabby tissue, and sunken cheeks. Thus, an effort has been made to restore the patient's stomatognathic system. Tooth loss followed by complete denture rehabilitation can have significant psychological and social consequences for patients. Dentures restore a sense of normalcy and allow the sufferer to communicate with others in today's image-conscious world. Chewing discomfort, as well as unfavorable aesthetics and phonetics, are the most common denture complaints. A complete denture patient's prosthetic rehabilitation should never be confined to the replacement of lost teeth; rather, the ultimate goal should be the restoration of oral functions and aesthetics. The article describes a straightforward, cost-effective, practical, and aesthetic strategy for rehabilitating a complete denture patient with resorbed ridge, flabby tissue, and sunken cheeks. Thus, an effort has been made to restore the patient's stomatognathic system.

The objective of this study was to determine the antimicrobial activity of type III gypsum at three different chloramine-T concentrations and to ascertain the most effective concentration to be added for optimum inhibitory activity against Candida albicans. MethodTen discs of type III gypsum were fabricated for each group. Standard type III gypsum without any disinfectant was used for the control group. For the experimental group, an admixture of chloramine-T and standard dental stone was employed in varying w/w concentrations (0.1%, 0.25%, and 0.5%). Discs were placed in a petri dish containing Sabouraud dextrose agar lawned with Candida albicans culture and incubated for 24 hours. The zone of inhibition created around the discs was measured and evaluated. ResultThe mean zone of inhibition (mean ± standard deviation) in the control group was 0 mm; 0.70±1.05 mm in group 1 (0.1% w/w concentration), 2.70 ± 2.35 mm in group 2 (0.25% w/w concentration), and 20.80 ± 1.68 mm in group 3 (0.5% w/w concentration). A one-way ANOVA test showed that there was a significant difference in the inhibition zone created around all groups (p < 0.05), with the discs of group 3 yielding the most positive results. ConclusionThe addition of 0.5% chloramine-T to type III gypsum showed the most promising result, out of the concentrations tested, as a self-disinfecting dental stone and could be used for further investigations.

Iron is a necessary micro-nutrient for proper functioning of the erythropoietic, oxidative and cellular metabolism. The iron balance in the body adversely affects the normal physiologic functioning of the body and structures in the oral cavity. Various abnormalities develop owing to improper iron metabolism in the body which reflects in the oral cavity. The toxicity of iron has to be well understood to immediately identify the hazardous effects which arise owing to it and to manage it. It has been very well mentioned in the chapter. The manifestations of defects of iron metabolism in the oral cavity should be carefully studied to improve the prognosis of the treatment of the same. Disorders related to iron metabolism should be managed for improvement in the quality of life of the patient.

IntroductionThe main purpose of the study was to assess and compare bone mineral density (BMD) at prospective implant sites in the mandible in type 2 diabetes mellitus (T2DM) and non-diabetic patients using cone beam computed tomography (CBCT). Material and methodologyA total of 40 patients were included in this type of cross-sectional study. They were divided into two groups, A and B, according to their haemoglobin A1c values. Group A consisted of patients with HbA1c between the range of 6.1%-8% and group B had patients with no history of T2DM. CBCT scans were made of the mandibular arches of both the patients to evaluate the BMD at lingual and buccal cortical plates and the trabecular regions in two successive slices with the assistance of PlanMeca Romexis software (PlanMeca Romexis®, Helsinki, Finland). The Shapiro-Wilk test was used to determine the normality of continuous data. The Mann-Whitney U test was used to compare the groups. ResultsThere were no differences that were statistically significant between the two cohorts according to the Mann-Whitney U test at buccal cortical plate points 1 and 2. However, the diabetes group's mean bone density at implant sites-A, B, C, D, and E at trabeculae points 1 and 2 was considerably (7p>0.001) lower than the nondiabetic groups. The mean bone density of the diabetes group was marginally but significantly (p=0.009) lower than the non-diabetic group at lingual cortical plates. ConclusionIndividuals with type 2 diabetes mellitus show significantly lower bone mineral density in the lingual cortical plate and trabecular region, however, implant therapy can be performed with certain mentioned guidelines in such regions. In the buccal cortical region, the bone mineral density is seen to be unaffected.