In this study, we used a simple and cost-effective method to fabricate triboelectric nanogenerators (TENGs) based on biowaste eggshell membranes (EMs). We prepared stretchable electrodes with various types of EMs (hen, duck, goose, and ostrich) and employed them as positive friction materials for bio-TENGs. A comparison of the electrical properties of the hen, duck, goose, and ostrich EMs revealed that the output voltage of the ostrich EM could reach up to 300 V, due to its abundant functional groups, natural fiber structure, high surface roughness, high surface charge, and high dielectric constant. The output power of the resulting device reached 0.18 mW, sufficient to power 250 red light-emitting diodes simultaneously, as well as a digital watch. This device also displayed good durability when subjected to 9000 cycles at 30 N at a frequency of 3 Hz. Furthermore, we designed an ostrich EM-TENG as a smart sensor for the detection of body motion, including leg movement and the pressing of different numbers of fingers.
This paper describes a simple electrospinning approach for fabricating poly(3-hexylthiophene) (P3HT)/poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) semiconductive nanofiber mat triboelectric nanogenerators (TENGs). Measurements of the electrical properties of the P3HT/PVDF-HFP semiconductive nanofiber TENGs revealed that the output voltage could be enhanced up to 78 V with an output current of 7 μA. The output power of the device reached 0.55 mW, sufficient to power 500 red light-emitting diodes instantaneously, as well as a digital watch. The P3HT/PVDF-HFP semiconductive nanofiber TENG could be used not only as a self-powered device but also as a sensor for monitoring human action. Furthermore, it displayed good durability when subjected to 20,000 cycles of an external force test.
Because triboelectric nanogenerators (TENGs) convert mechanical energy into electricity, they are sustainable energy sources for powering a diverse range of intelligent sensing and monitoring devices. To enhance the electrical output...
This paper describes a simple electrospinning approach for fabricating poly(3-hexylthiophene) (P3HT)/poly(vinylidene fluoride–co–hexafluoropropylene) (PVDF-HFP) semiconductive nanofiber mat triboelectric nanogenerators (TENGs). Measurements of the electrical properties of the P3HT/PVDF-HFP semiconductive nanofiber TENGs revealed that the output voltage could be enhanced up to 78 V with an output current of 7 μA. The output power of the device reached 0.55 mW, sufficient to power 500 red light-emitting diodes instantaneously, as well as a digital watch. The P3HT/PVDF-HFP semiconductive nanofiber TENG could be used not only as a self-powered device but also as a sensor for monitoring human action. Furthermore, it displayed good durability when subjected to 20,000 cycles of an external force test.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.