We have prepared the nanocomposites of a polyether-type waterborne polyurethane (PU) incorporated with different amounts (17.4-174 ppm) of gold (Au) nanoparticles ( approximately 5 nm). The nanocomposite containing a certain amount (43.5 ppm) of gold was previously demonstrated to possess the optimal thermal and mechanical properties, as well as much reduced foreign body reactions in subcutaneous rats. In this study, the surface morphology, biocompatibility, oxidative degradation, and free radical scavenging ability of the nanocomposites were characterized in vitro. The nanocomposite at 43.5 ppm of gold ("PU-Au 43.5 ppm") exhibited different surface morphology confirmed by the atomic force microscope. PU-Au 43.5 ppm also showed enhanced cellular proliferation, reduced platelet and monocyte activation, and much less bacterial adhesion, relative to PU alone or nanocomposites at the other Au contents, in general. This better biocompatibility was associated with the surface morphological change in the presence of Au. The oxidative degradation in PU-Au 43.5 ppm was also inhibited. The increased oxidative stability corresponded to the greater free radical scavenging ability of the nanocomposites.

Polyvinyl alcohol (PVA) demonstrates chemical stability and biocompatibility and is widely used in biomedical applications. The porous bamboo charcoal has excellent toxin absorptivity and has been used in blood purification. In this study, bamboo charcoal nanoparticles (BCNPs) were acquired with nano-grinding technology. The PVA and PVA/BCNP nanocomposite membranes were prepared and characterized by the tensile test, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). Results showed that the tensile strength and elongation of the swollen PVA membranes containing 1% BCNPs (PB1) were significantly greater than those of PVA and other PVA/BCNP composite membranes. In addition, the major absorption band of OH stretching in the IR spectra shifted from 3262 cm−1 for PVA membrane containing 1% BCNP to 3244 cm−1 for PVA membrane containing 20% BCNP. This blue shift might be attributed to the interaction between the PVA molecules and BCNPs. Moreover, the intensity of the XRD peaks in PVA was decreased with the increased BCNP content. The bioactivity of the nanocomposites was evaluated by immersion in the simulated body fluid (SBF) for seven days. The mineral deposition on PB5 was significantly more than that on the other samples. The mineral was identified as hydroxyapatite (HA) by XRD. These data suggest that the bioactivity of the composite hydrogel membranes was associated with the surface distribution of hydrophilic/hydrophobic components. The PVA/BCNP composite hydrogels may have potential applications in alveolar bone regeneration.

Nanocomposites from a hexamethylene diisocyanate (HDI)-based polyester-type waterborne polyurethane (PU) containing different amounts (17.4-174 ppm) of gold (Au) nanoparticles (approximately 5 nm) were prepared. The microstructure and physiochemical properties of the nanocomposites were characterized. The cell attachment and proliferation, platelet activation, and bacterial adhesion on the nanocomposites were evaluated. Gold nanoparticles in small amounts induced significant changes in surface morphology and domain structures, from hard segment lamellae to soft segment micelles. These changes resembled the morphological transformation among different mesophases occurred in diblock copolymers. Better cellular proliferation, lower platelet activation, and reduced bacterial adhesion were demonstrated for the PU nanocomposite with 43.5 or 65 ppm of Au than the pure PU or the nanocomposite containing a different amount of Au. The different cellular response on PU-Au nanocomposites was attributed to the extensively modified surface morphology and phase separation in the presence of a small amount of Au nanoparticles.

Immortalized rat chondrocytes (IRCs) were employed to evaluate the cytocompatibility of different biodegradable polyester scaffolds for chondrocyte seeding and cartilage tissue engineering in vitro due to the limitation of using freshly harvested chondroctyes. Cells were seeded onto the films and the porous substrates as well as into the three-dimensional scaffolds made of the biodegradable polyesters including poly(l-lactide) (PLLA) and two poly(lactide-co-glycolide)s (PLGAs). The materials were characterized by water contact angle, electron spectroscopy for chemical analysis (ESCA), and microscopy. PLGA50/50, one of the PLGAs, had the largest cell numbers at 24 h and 96 h (close to the tissue culture polystyrene control), possibly due to its lower contact angle, higher oxygen/carbon (O/C) atomic ratio, and larger degradation rate. When the surface was further modified by cross-linked Type-II collagen, cell population was significantly enhanced (two- to fourfold). The adhesion and proliferation behavior of IRCs on different materials was parallel to that of rabbit chondrocytes, but was more reproducible in general. IRCs are thus suitable for evaluation of different polymer scaffolds. Despite the favorable cytocompatibility of PLGA50/50, blending with a small portion of PLLA is required for easy fabrication and collagen modification. Scaffolds made of blended materials by freeze-drying procedure with the surface modified by cross-linked Type-II collagen were demonstrated as the ideal templates for chondrocyte seeding in our study.

No abstract