Single-crystal indium antimony (InSb) nanowire was fabricated into middle-infrared photodetectors based on a metal–semiconductor-metal (M-S-M) structure. The InSb nanowires were synthesized using an electrochemical method at room temperature. The characteristics of the FET reveal an electron concentration of 3.6 × 1017 cm−3 and an electron mobility of 215.25 cm2 V−1 s−1. The photodetectors exhibit good photoconductive performance, excellent stability, reproducibility, superior responsivity (8.4 × 104 A W−1), and quantum efficiency (1.96 × 106%). These superior properties are attributed to the high surface-to-volume ratio and single-crystal 1D nanostructure of photodetectors that significantly reduce the scattering, trapping, and the transit time between the electrodes during the transport process. Furthermore, the M-S-M structure can effectively enhance space charge effect by the formation of the Schottky contacts, which significantly assists with the electron injection and photocurrent gain.
Vertically aligned single-crystal InSb nanowires were synthesized via the electrochemical method at room temperature. The characteristics of Fourier transform infrared spectrum revealed that in the syntheses of InSb nanowires, energy bandgap shifts towards the short wavelength with the occurrence of an electron accumulation layer. The current–voltage curve, based on the metal–semiconductor–metal model, showed a high electron carrier concentration of 2.0 × 1017 cm−3 and a high electron mobility of 446.42 cm2 V−1 s−1. Additionally, the high carrier concentration of the InSb semiconductor with the surface accumulation layer induced a downward band bending effect that reduces the electron tunneling barrier. Consequently, the InSb nanowires exhibit significant field emission properties with an extremely low turn-on field of 1.84 V μm−1 and an estimative threshold field of 3.36 V μm−1.
Selective area growth of single crystalline Sn-doped In2O3 (ITO) nanowires synthesized via vapor–liquid–solid (VLS) method at 600°C was applied to improve the field emission behavior owing to the reduction of screen effect. The enhanced field emission performance reveals the reduction of turn-on fields from 9.3 to 6.6 V μm−1 with increase of field enhancement factors (β) from 1,621 to 1,857 after the selective area growth at 3 h. Moreover, we find that the screen effect also highly depends on the length of nanowires on the field emission performance. Consequently, the turn-on fields increase from 6.6 to 13.6 V μm−1 with decreasing β values from 1,857 to 699 after the 10-h growth. The detailed screen effect in terms of electrical potential and NW density are investigated in details. The findings provide an effective way of improving the field emission properties for nanodevice application.
Nanocables have been formed with Sb-doped SnO2 (SnO2 : Sb) cores and SiO2 shells. First, SnO2 : Sb nanowires were synthesized by a vapour–liquid–solid process at 900 °C. Subsequently, thin SiO2 shells were deposited onto the surfaces of these SnO2 : Sb nanowires. Thin-film x-ray diffraction showed that all the as-synthesized core–shell nanocables had a single-phase SnO2 rutile structure. Field emission scanning electron microscopy revealed that the nanocables had diameters of 80–140 nm and lengths of up to several hundred micrometres. As-synthesized SnO2 : Sb–SiO2 core–shell nanocables revealed an extremely low turn-on field, ∼0.35 V µm−1, which was seven times lower than the ∼2.3 V µm−1 field of SnO2 : Sb nanowires.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.