In this investigation, we propose a strip segmentation phase (SSP) method for a spatial light modulator (SLM) to generate independent multifocal spots when the beam passes through a high numerical aperture (NA) lens. With the SSP method, multifocal spots can be generated with each spot independently, flexibly and uniformly distributed. The performance of the SSP method is first validated with numerical simulation. Then, by applying the modulation method with SLM and importing the beams into an inverted fluorescence microscopy system with a high-NA lens, the spot distribution and their shapes can be observed by fluorescent image. The fluorescent image exhibits high uniformity and high consistency with the aforementioned numerical simulations. Finally, we dynamically load a series of phase maps on SLM to realize continuous and independent spot movement in a multifocal array. By laser direct writing on photoresist, a complex NWU-shape structure can be realized flexibly with multi-task fabrication capability. The SSP method can significantly improve the efficiency and flexibility of laser direct writing. It is also compatible with most recent techniques, e.g., multiphoton absorption, stimulated emission depletion and photo-induced depolymerization etc., to realize parallel super-resolution imaging and fabrications.

No abstract

The interface of mediums with refractive indices discontinuous, for example airglass and glass-water, are inevitable in microscopic imaging. In this work, the aberration of oblique interface with refractive index discontinuous on the laser scanning microscope was investigated theoretically with numerical simulations. It was found that the position, shape and FWHM of focal spots, were all significantly affected by the aberration due to oblique interface. The aberration can cause serious shifting of focal spots in the axial direction of beam during -scanning and lead to an inaccurate reconstruction of three-dimensional (3D)targets. The aberration can also lead to a decreasing spatial resolution. To correct the influence of the aberration, a pure-phase modulation method has been proposed. By applying a phase compensation map into a spatial light modulator (SLM), the oblique interface aberration had been corrected experimentally in a laser scanning microscope. We hope this research can attract the attention of researchers when using scanning microscope, especially for reconstructing 3D biological and material structures.

In this Letter, we propose a non-iterative multifold strip segmentation phase method for a spatial light modulator (SLM) to generate multifocal spots of diverse beams (Airy, spiral, perfect vortex, and Bessel–Gaussian beams) in a high-numerical-aperture system, with up to 6D controllability. The method is further validated by an inverted fluorescence microscope. By adjusting the bright and dark voltage parameters of the SLM, zero-order light caused by the pixelation effect of the SLM has been successfully eliminated. We hope this research provides a more flexible and powerful approach for the rapid modulation of multi-focus light fields in the development of biomedicine and lithography.