No abstract

No abstract

The Generalized Integral Transform Technique (GITT) was applied to predict dynamic response of Vortex-Induced Vibration (VIV) of a long flexible cylinder. A nonlinear wake oscillator model was used to represent the cross-flow force acting on the cylinder, leading to a coupled system of second-order Partial Differential Equations (PDEs) in temporal variable. The GITT approach was used to transform the system of PDEs to a system of Ordinary Differential Equations (ODEs), which was numerically solved by using the Adams-Moulton and Gear method (DIVPAG) developed by the International Mathematics and Statistics Library (IMSL). Numerical results were presented for comparison to those given by the finite difference method and experimental results, allowing a critical evaluation of the technique performance. The influence of variation of mean axial tension induced by elongation of flexible cylinder was evaluated, which was shown to be not negligible in numerical simulation of VIV of a long flexible cylinder.

Aluminum Tri-hydrate (ATH) can be effectively used to increase fire resistance of Fiber-Reinforced Polymer (FRP) materials. This paper studies the effect of ATH filler on mechanical properties of Glass FRP (GFRP) material, based on compression, tension, shear and flexural test results from three types of GFRP materials with the amount of 0% (control), 25%, and 50% ATH filler by weight of the resin. It was found that the control was the strongest for all tests except for flexure, which is 3% lower than the flexural strength of 25% ATH sample. The compressive strength dropped 19% and 25% for 25% and 50% ATH loadings, respectively, compared to the control. For shear and tensile strengths, the 25% ATH sample acted similarly to the control, but the 50% ATH sample had a significantly lower strength. For stiffness, changing the additive amount from 0% to 50% had only small changes for compression, tension, and flexure. It can be concluded that adding ATH generally decreases the strength and makes FRP more brittle. The performance of a 25% ATH loading is comparable to the control except compression, while a 50% ATH loading has a more significant effect on the mechanical properties of the GFRP. The data presented in this paper can be used to develop fire-resistant FRP systems.