Mineral nucleation is a phase transformation of aqueous components to solids with an accompanying creation of new surfaces. In this evolutional, yet elusive, process, nuclei often form at environmental interfaces, which provide remarkably reactive sites for heterogeneous nucleation and growth. Naturally occurring nucleation processes significantly contribute to the biogeochemical cycles of important components in the Earth's crust, such as iron and manganese oxide minerals and calcium carbonate. However, in recent decades, these cycles have been significantly altered by anthropogenic activities, which affect the aqueous chemistry and equilibrium of both surface and subsurface systems. These alterations can trigger the dissolution of existing minerals and formation of new nanoparticles (i.e., nucleation and growth) and consequently change the porosity and permeability of geomedia in subsurface environments. Newly formed nanoparticles can also actively interact with components in natural and engineered aquatic systems, including those posing a significant hazard such as arsenic. These interactions can bilaterally influence the fate and transport of both newly formed nanoparticles and aqueous components. Due to their importance in natural and engineered processes, heterogeneous nucleation at environmental interfaces has started to receive more attention. However, a lack of time-resolved in situ analyses makes the evaluation of heterogeneous nucleation challenging because the physicochemical properties of both the nuclei and surfaces significantly and dynamically change with time and aqueous chemistry. This Account reviews our in situ kinetic studies of the heterogeneous nucleation and growth behaviors of iron(III) (hydr)oxide, calcium carbonate, and manganese (hydr)oxide minerals in aqueous systems. In particular, we utilized simultaneous small-angle and grazing incidence small-angle X-ray scattering (SAXS/GISAXS) to investigate in situ and in real-time the effects of water chemistry and substrate identity on heterogeneously and homogeneously formed nanoscale precipitate size dimensions and total particle volume. Using this technique, we also provided a new platform for quantitatively comparing between heterogeneous and homogeneous nucleation and growth of nanoparticles and obtaining undiscovered interfacial energies between nuclei and surfaces. In addition, nanoscale surface characterization tools, such as in situ atomic force microscopy (AFM), were utilized to support and complement our findings. With these powerful nanoscale tools, we systematically evaluated the influences of environmentally abundant (oxy)anions and cations and the properties of environmental surfaces, such as surface charge and hydrophobicity. The findings, significantly enhanced by in situ observations, can lead to a more accurate prediction of the behaviors of nanoparticles in the environment and enable better control of the physicochemical properties of nanoparticles in engineered systems, such as catalytic reactions and energy storage.

Managed aquifer recharge (MAR) is a water reuse technique with the potential to meet growing water demands. However, MAR sites have encountered arsenic mobilization resulting from recharge operations. To combat this challenge, it is imperative to identify the mechanisms of arsenic mobilization during MAR. In this bench-scale study, arsenic mobilization from arsenopyrite (FeAsS) was characterized for conditions relevant to MAR operations. Experimentally determined activation energies for arsenic mobilization from FeAsS under aerobic conditions were 36.9 ± 2.3 kJ/mol for 10 mM sodium chloride, 40.8 ± 3.5 kJ/mol for 10 mM sodium nitrate, and 43.6 ± 5.0 kJ/mol for secondary effluent from a wastewater treatment plant. Interestingly, the sodium chloride system showed higher arsenic mobilization under aerobic conditions. In addition, secondary mineral precipitation varied among systems and further affected arsenic mobilization. For example, the wastewater system inhibited precipitation, while in the sodium chloride system, faster phase transformation of iron­(III) (hydr)­oxide precipitates was observed, resulting in hematite formation after 7 days. The phase transformation to hematite will result in less available surface area for arsenic attenuation. These new observations and activation energies can be useful to develop improved reactive transport models for the fate of arsenic during MAR, and develop strategies to minimize arsenic release.

To predict the fate of aqueous pollutants, a better understanding of heterogeneous Fe(III) (hydr)oxide nucleation and growth on abundant mineral surfaces is needed. In this study, we measured in situ heterogeneous Fe(III) (hydr)oxide nucleation and growth on quartz, muscovite, and corundum (Al2O3) in 10(-4) M Fe(III) solution (in 10 mM NaNO3 at pH = 3.7 ± 0.2) using grazing incidence small-angle X-ray scattering (GISAXS). Interestingly, both the fastest heterogeneous nucleation and slowest growth occurred on corundum. To elucidate the mechanisms, zeta potential and water contact angle measurements were conducted. Electrostatic forces between the charged Fe(III) (hydr)oxide polymeric embryos and substrate surfaces-which affect local saturations near the substrate surfaces-controlled heterogeneous growth rates. Water contact angles (7.5° ± 0.7, 22.8° ± 1.7, and 44.8° ± 3.7 for quartz, muscovite, and corundum, respectively) indicate that corundum has the highest substrate-water interfacial energy. Furthermore, a comparison of structural mismatches between the substrates and precipitates indicates a lowest precipitate-substrate interfacial energy for corundum. The fastest nucleation on corundum suggests that interfacial energies in the solution-substrate-precipitate system controlled heterogeneous nucleation rates. The unique information provided here bolsters our understanding of nanoparticle-mineral surface interactions, mineral surface modification by iron oxide coating, and pollutant transport.

Iron(III) (hydr)oxides play an important role in the geochemical cycling of contaminants in natural and engineered aquatic systems. The ability of iron(III) (hydr)oxides to immobilize contaminants can be related to whether the precipitates form heterogeneously (e.g., at mineral surfaces) or homogeneously in solution. Utilizing grazing incidence small-angle X-ray scattering (GISAXS), we studied heterogeneous iron(III) (hydr)oxide nucleation and growth on quartz substrates for systems containing arsenate and phosphate anions. For the iron(III) only system, the radius of gyration (Rg) of heterogeneously formed precipitates grew from 1.5 to 2.5 (± 1.0) nm within 1 h. For the system containing 10(-5) M arsenate, Rg grew from 3.6 to 6.1 (± 0.5) nm, and for the system containing 10(-5) M phosphate, Rg grew from 2.0 to 4.0 (± 0.2) nm. While the systems containing these oxyanions had more growth, the system containing only iron(III) had the most nucleation events on substrates. Ex situ analyses of homogeneously and heterogeneously formed precipitates indicated that precipitates in the arsenate system had the highest water content and that oxyanions may bridge iron(III) hydroxide polymeric embryos to form a structure similar to ferric arsenate or ferric phosphate. These new findings are important because differences in nucleation and growth rates and particle sizes will impact the number of available reactive sites and the reactivity of newly formed particles toward aqueous contaminants.

Managed aquifer recharge (MAR) has potential for addressing deficits in water supplies worldwide. It is also widely used for preventing saltwater intrusion, maintaining the groundwater table, and augmenting ecological stream flows, among many other beneficial environmental applications. However, field MAR sites have experienced arsenic mobilization from aquifer formation minerals due to induced changes in groundwater chemistry. To address this environmental concern, it is crucial to understand the potential sources and sinks impacting arsenic mobilization. This paper outlines important mineral-water interactions that can occur at MAR sites. Detailed information on minerals of concern, physiochemical processes for arsenic mobilization or attenuation, and the potential impact of microbial activity and hydrology on these processes is provided. Based on these mineral-water interactions, guidelines for predicting arsenic mobility are presented, and recommendations are made concerning MAR site monitoring. The review emphasizes important aspects in correlating interfacial reactions to reactive transport modeling and elucidating future challenges, a first step toward developing safer and more sustainable MAR operations.

Water chemistry affects the nucleation kinetics, precipitate morphology, and quantity of ironIJIII) (hydr)oxide nanoparticles, directly impacting the reactive surface area of geomedia and fate of associated waterborne contaminants. In this study, we utilized in situ grazing-incidence small angle X-ray scattering (GISAXS) and complementary ex situ techniques to investigate heterogeneous ironIJIII) (hydr)oxide nucleation on quartz in the presence of natural organic matter (NOM) and arsenate. Results indicate unique fractal aggregation behavior in the systems containing NOM and precipitating ironIJIII) (hydr)oxide nanoparticles. Furthermore, the coexistence of arsenic and NOM lead to the formation of two distinct particle size ranges: larger particles dominated by arsenic effects, and smaller particles dominated by NOM effects. These new findings provide important implications for understanding the nucleation, growth, and aggregation of ironIJIII) (hydr)oxides in aqueous systems where NOM is present, such as natural surface waters and water and wastewater treatment plants. This study also offers new insight into how NOM-associated ironIJIII) (hydr)oxides can interact with aqueous contaminants such as arsenate.A better understanding of the fate and transport of ironIJIII) (hydr)oxide nanoparticles is crucial for controlling trace toxic contaminants in natural and engineered aquatic systems. Despite this, their nucleation, growth, and aggregation are not well understood. We studied the impacts of natural organic matter and arsenate on newly-forming ironIJIII) (hydr)oxide in situ and found that these constituents altered the nanoparticle size and aggregation state. Our findings allow us to elucidate how contaminants affect the aggregation or disaggregation of ironIJIII) (hydr)oxide nanoparticles in aqueous environments, where organic matter will be nearly ubiquitously present. Outcomes can also be informative in developing reactive transport models that better predict the ability of ironIJIII) (hydr)oxides to attenuate aqueous contaminants.

Unconventional oil and gas from shale formations have emerged as some of the fastest growing energy resources in the United States, providing both cleaner energy to consumers and reducing the nation’s reliance on energy imports. To properly harness these important natural resources, the nanopore structure of associated shales must be fully understood, particularly under hydraulic fracturing conditions, where they are exposed to both overburden compressive and hydrostatic fluid pressures. The current study uses small-angle neutron scattering (SANS) to characterize pore structure, including porosity, pore accessibility, and pore size distribution, in the 1–100 nm regime at elevated pressures for mineralogically distinct clay- and carbonate-rich shales from the Permian Basin. Unlike typical porosity measurement techniques, SANS is uniquely capable of characterizing both open and closed porosity, allowing measurement of how pore accessibility changes with pressure and determination of the size range of accessible versus inaccessible pores. The porosity of the clay-rich shale was 7.7%, compared to 0.51% for the carbonate-rich shale. However, only 2.6% of the nanopores in the carbonate-rich shale were inaccessible to water at 8 kPSI (55.1 MPa) compared to 7.8% for the clay-rich shale. Further analyses indicated that the closed pores fall within distinct size ranges, likely corresponding with the chemical nature of the pore host material. These results provide valuable insight into the effects of shale petrophysical properties on hydrocarbon extraction from unconventional reservoirs.

By 2050, shale gas production is expected to exceed three-quarters of total US natural gas production. However, current unconventional hydrocarbon gas recovery rates are only around 20%. Maximizing production of this natural resource thus necessitates improved understanding of the fundamental mechanisms underlying hydrocarbon retention within the nanoporous shale matrix. In this study, we integrated molecular simulation with high-pressure small-angle neutron scattering (SANS), an experimental technique uniquely capable of characterizing methane behavior in situ within shale nanopores at elevated pressures. Samples were created using Marcellus shale, a gas-generative formation comprising the largest natural gas field in the United States. Our results demonstrate that, contrary to the conventional wisdom that elevated drawdown pressure increases methane recovery, a higher peak pressure led to the trapping of dense, liquid-like methane in sub-2 nm radius nanopores, which comprise more than 90% of the measured nanopore volume, due to irreversible deformation of the kerogen matrix. These findings have critical implications for pressure management strategies to maximize hydrocarbon recovery, as well as broad implications for fluid behavior under confinement.