Effective growth of multiwalled boron nitride nanotubes (BNNTs) has been obtained by thermal chemical vapor deposition (CVD). This is achieved by a growth vapor trapping approach as guided by the theory of nucleation. Our results enable the growth of BNNTs in a conventional horizontal tube furnace within an hour at 1200 °C. We found that these BNNTs have an absorption band edge of 5.9 eV, approaching that of single h-BN crystals, which are promising for future nanoscale deep-UV light emitting devices.
For the first time, patterned growth of boron nitride nanotubes is achieved by catalytic chemical vapor deposition (CCVD) at 1200 °C using MgO, Ni, or Fe as the catalysts, and an Al 2 O 3 diffusion barrier as underlayer. The as-grown BNNTs are clean, vertically aligned, and have high crystallinity. Near band-edge absorption ∼6.0 eV is detected, without significant sub-band absorption centers. Electronic transport measurement confirms that these BNNTs are perfect insulators, applicable for future deep-UV photoelectronic devices and high-power electronics.
Metal stents are commonly used to revascularize occluded arteries. A bioabsorbable metal stent that harmlessly erodes away over time may minimize the normal chronic risks associated with permanent implants. However, there is no simple, low-cost method of introducing candidate materials into the arterial environment. Here, we developed a novel experimental model where a biomaterial wire is implanted into a rat artery lumen (simulating bioabsorbable stent blood contact) or artery wall (simulating bioabsorbable stent matrix contact). We use this model to clarify the corrosion mechanism of iron (≥99.5 wt %), which is a candidate bioabsorbable stent material due to its biocompatibility and mechanical strength. We found that iron wire encapsulation within the arterial wall extracellular matrix resulted in substantial biocorrosion by 22 days, with a voluminous corrosion product retained within the vessel wall at 9 months. In contrast, the blood-contacting luminal implant experienced minimal biocorrosion at 9 months. The importance of arterial blood versus arterial wall contact for regulating biocorrosion was confirmed with magnesium wires. We found that magnesium was highly corroded when placed in the arterial wall but was not corroded when exposed to blood in the arterial lumen for 3 weeks. The results demonstrate the capability of the vascular implantation model to conduct rapid in vivo assessments of vascular biomaterial corrosion behavior and to predict long-term biocorrosion behavior from material analyses. The results also highlight the critical role of the arterial environment (blood vs. matrix contact) in directing the corrosion behavior of biodegradable metals.
This article provides a concise review of the recent research advancements in boron nitride nanotubes (BNNTs) with a comprehensive list of references. As the motivation of the field, we first summarize some of the attractive properties and potential applications of BNNTs. Then, latest discoveries on the properties, applications, and synthesis of BNNTs are discussed. In particular, we focus on low-temperature and patterned growth, and mass production of BNNTs, since these are the major challenges that have hindered investigation of the properties and application of BNNTs for the past decade. Finally, perspectives of future research on BNNTs are discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.