Successful bioremediation of contaminated soils is controlled by the ability to deliver bioremediation additives, such as bacteria and/or nutrients, to the contaminated zone. Because hydraulic advection is not practical for delivery in clays, electrokinetic (EK) injection is an alternative for efficient and uniform delivery of bioremediation additive into low-permeability soil and heterogeneous deposits. EK–enhanced bioaugmentation for remediation of clays contaminated with chlorinated solvents is evaluated. Dehalococcoides (Dhc) bacterial strain and lactate ions are uniformly injected in contaminated clay and complete dechlorination of chlorinated ethene is observed in laboratory experiments. The injected bacteria can survive, grow, and promote effective dechlorination under EK conditions and after EK application. The distribution of Dhc within the clay suggests that electrokinetic transport of Dhc is primarily driven by electroosmosis. In addition to biodegradation due to bioaugmentation of Dhc, an EK-driven transport of chlorinated ethenes is observed in the clay, which accelerates cleanup of chlorinated ethenes from the anode side. Compared with conventional advection-based delivery, EK injection is significantly more effective forestablis hingmicrobial reductive dechlorination capacity in low-permeability soils.

Environmental fracturing offers assistance to remediation efforts at contaminated, low-permeability sites via creation of active fracture networks, and hence, reduction of mass transport limitations set by diffusion in low-permeability matrices. A pilot study of pneumatic fracturing, focusing on direct documentation of fracture propagation patterns and spacing, was performed at a typical basal clay till site. The study applied a novel package of documentation methods, including injection of five tracers with different characteristics (bromide, uvitex, fluorescein, rhodamine WT, and brilliant blue), subsequent tracer-filled fracture documentation via direct and indirect methods, and geological characterization of the fractured site. The direct documentation methods consisted of Geoprobe coring, augering, and excavation. A mass balance and conceptual model have been established for the distribution of the injected tracers in the subsurface. They reveal that tracer was distributed within 2 m of the fracturing well, mainly in existing fractures above the redox boundary (2 to 4 m.b.s.; 5 to 10 cm spacing). Spacing of observed tracer-filled fractures was large (>1 m) at greater depths. The number of fractures induced/activated could possibly be increased via adjustments to the fracturing equipment design.

Soil and groundwater are key components in the sustainable management of the subsurface environment. Source contamination is one of its main threats and is commonly addressed using established remediation techniques such as in-situ chemical oxidation (ISCO), in-situ chemical reduction (ISCR; most notably using zero-valent iron [ZVI]), enhanced in-situ bioremediation (EISB), phytoremediation, soil-washing, pump-and-treat, soil vapour extraction (SVE), thermal treatment, and excavation and disposal. Decades of field applications have shown that these techniques can successfully treat or control contaminants in higher permeability subsurface materials such as sands, but achieve only limited success at sites where low permeability soils, such as silts and clays, prevail. Electrokinetics (EK), a soil remediation technique mostly recognized in in-situ treatment of low permeability soils, has, for the last decade, been combined with more conventional techniques and can significantly enhance the performance of several of these remediation technologies, including ISCO, ISCR, EISB and phytoremediation. Herein, we discuss the use of emerging EK techniques in tandem with conventional remediation techniques, to achieve improved remediation performance. Furthermore, we highlight new EK applications that may come to play a role in the sustainable treatment of the contaminated subsurface.

No abstract

No abstract

No abstract

No abstract

Highlights • Electrokinetically induced delivery of amendments in bryozoan limestone is proposed. • For the application, an experimental setup was successfully designed and evaluated. • Fermentation of donor indicated successful pH control and anaerobic conditions. • Enhanced delivery of lactate and bacteria by electromigration and electrophoresis. • Essential contact between bacteria, donor and contaminant achieved within matrix.