Microalgae can excrete exopolymer substances (EPS) with a potential to form hetero-aggregates with microplastic particles. In this work, two freshwater (Microcystis panniformis and Scenedesmus sp.) and two marine (Tetraselmis sp. and Gloeocapsa sp.) EPS producing microalgae were exposed to different microplastics. In this study, the influence of the microplastic particles type, size and density in the production of EPS and hetero-aggregates potential was studied. Most microalgae contaminated with microplastics displayed a cell abundance decrease (of up to 42%) in the cultures. The results showed that the formed aggregates were composed of microalgae and EPS (homo-aggregates) or a combination of microalgae, EPS and microplastics (hetero-aggregates). The hetero-aggregation was dependent on the size and yield production of EPS, which was species specific. Microcystis panniformis and Scenedesmus sp. exhibited small EPS, with a higher propension to disaggregate, and consequently lower capabilities to aggregate microplastics. Tetraselmis sp. displayed a higher ability to aggregate both low and high-density microplastics, being partially limited by the size of the microplastics. Gloeocapsa sp. had an outstanding EPS production and presented excellent microplastic aggregation capabilities (adhered onto the surface and also incorporated into the EPS). The results highlight the potential of microalgae to produce EPS and flocculate microplastics, contributing to their vertical transport and consequent deposition. Thus, this work shows the potential of microalgae as biocompatible solutions to water microplastics treatment.

This study investigates the benefits of including seed quality information into data-based models for final productivity estimation in an industrial antibiotic fermentation process. Multiway principal component analysis is applied to assess the seed quality using routinely gathered plant data. Multiway partial least-squares regression is then used to estimate the final productivity using data from the main fermentation only. The issue of selecting appropriate process variables as inputs is investigated. Subsequently, seed characteristics are included into the estimation models to assess the benefits of including information from this stage for productivity estimation. It is shown that it is possible to extract seed fermentation features related to the final productivity both at pilot and production scales. It is postulated that significant influential variations are mirrored in monitored variables during the main fermentation, and therefore seed quality is implicitly accounted for.

The increasing water pollution caused by the presence of nano-and microplastics has shown a need to pursue solutions to remediate this problem. In this work, an extracellular polymeric substance (EPS) producing freshwater Cyanothece sp. strain was exposed to nano-and microplastics. The bioflocculant capacity of the biopolymer produced was evaluated. The influence of different concentrations (1 and 10 mg L À1 ) of polystyrene nano-and microplastics in the extracellular carbohydrates and in the EPS production was studied. The presence of nano-and microplastics induced a negative effect on the microalgal growth (of up to 47%). The results show that the EPS produced by Cyanothece sp. exhibits high bioflocculant activity in low concentrations. Also, the EPS displayed very favourable characteristics for aggregation, as the aggregates were confirmed to consist of microalga, EPS and both the nano-and microplastics. These results highlight the potential of the microalgal-based biopolymers to replace hazardous synthetic flocculants used in wastewater treatment, while aggregating and flocculating nanoand microplastics, demonstrating to be a multi-purposed, compelling, biocompatible solution to nanoand microplastic pollution.

No abstract

Phthalate esters are highly present in aquatic plastic litter, which can interfere with the biological processes in the wildlife. In this work, the commonly found freshwater microalga Scenedesmus sp. was exposed to environmental concentrations (0.02, 1 and 100 μg L −1 ) and to a higher concentration (500 μg L −1 ) of dibutyl phthalate (DBP), which is an environmental pollutant. The growth, pH variation, production of photosynthetic pigments, proteins and carbohydrates were evaluated. The main inhibition effect of DBP on the microalgal growth was observed in the first 48 h of the exposure (EC 50 : 41.88 μg L -1 ). A reduction in the photosynthetic pigment concentration was observed for the 0.02, 1 and 100 μg L -1 conditions indicating that the DBP downregulated the growth rate and affected the photosynthetic process. A significant increase in protein production was only observed under 500 μg L −1 DBP exposure. The extracellular carbohydrates production slightly decreased with the presence of DBP, with a stronger decrease occurring in the 500 μg L -1 condition. These results highlight the environmental risk evaluation and ecotoxicological effects of DBP on the production of biovaluable compounds by microalgae. The results also emphasize the importance of assessing the consequences of the environmental concentrations exposure as a result of the DBP dose-dependent correlation effects.

Microplastics (MPs) are widely spread throughout aquatic systems and water bodies. Given that water quality is one of the most important parameters in the microalgal-based industry, it is critical to assess the biochemical impact of short-and long-term exposure to MPs pollution. Here, the microalga Phaeodactylum tricornutum was exposed to water contaminated with 0.5 and 50 mg L −1 of polystyrene (PS) and/or polymethyl methacrylate (PMMA). Results show that the microalgal cultures exposed to lower concentrations of PS displayed a growth enhancement of up to 73% in the first stage (days 3-9) of the exponential growth phase. Surprisingly, and despite the fact that long-term exposure to MPs contamination did not impair microalgal growth, a steep decrease in biomass production (of up to 82%) was observed. The production of photosynthetic pigments was shown to be pH-correlated during the full growth cycle, but cell density-independent in later stages of culturing. The extracellular carbohydrates production exhibited a major decrease during long-term exposure. Still, the production of extracellular proteins was not affected by the presence of MPs. This pilot laboratory-scale study shows that the microalgal exposure to water contaminated with MPs disturbs its biochemical equilibrium in a time-dependent manner, decreasing biomass production. Thus, microalgal industry-related consequences derived from the use of MPs-contaminated water are a plausible possibility.

In this work, the growth of Bacillus thuringiensis var. israelensis, a bioinsecticide producer, is investigated. Experiments were carried out in batch mode in order to obtain kinetic model parameters that were further applied to simulate fed-batch processes. The fed-batch mode allows more flexibility in the control of the substrate concentration in the culture medium. Different techniques, such as constant feeding, "bang-bang" control and model based control (exponential feeding and singular control), were compared. For the techniques based on a model, combinations of models with and without a substrate inhibition parameter were used to represent the simulated process and the internal model of the feeding controller. Singular control based on the model with an inhibition parameter proved to be the most robust controller

No abstract